My old module did not work so i bought another one, bought trouble ?

W

wolfen

Vu+ Newbie
Here is what i get with dmesg command, have i bought trouble ? :)

I have the latest bh image 2.0.8.1 and the full name of the receiver is : SANDBERG Mini DVB-T Dongle MPEG4/DAB/FM-Radio USB Receiver.

usb 1-2: new high speed USB device number 3 using ehci-brcm
WARNING: You are using an experimental version of the media stack.
As the driver is backported to an older kernel, it doesn't offer
enough quality for its usage in production.
Use it with care.
Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
Custom Black Hole build
usbcore: registered new interface driver dvb_usb_rtl28xxu
usb 1-2: dvb_usb_v2: found a 'Realtek RTL2832U reference design' in warm state
usb 1-2: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
DVB: registering new adapter (Realtek RTL2832U reference design)
usb 1-2: DVB: registering adapter 1 frontend 0 (Realtek RTL2832 (DVB-T))...
i2c i2c-0: e4000: Elonics E4000 successfully identified
usb 1-2: dvb_usb_v2: 'Realtek RTL2832U reference design' successfully initialized and connected
 
wolfen said:
Here is what i get with dmesg command, have i bought trouble ? :)

I have the latest bh image 2.0.8.1 and the full name of the receiver is : SANDBERG Mini DVB-T Dongle MPEG4/DAB/FM-Radio USB Receiver.

usb 1-2: new high speed USB device number 3 using ehci-brcm
WARNING: You are using an experimental version of the media stack.
As the driver is backported to an older kernel, it doesn't offer
enough quality for its usage in production.
Use it with care.
Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
Custom Black Hole build
usbcore: registered new interface driver dvb_usb_rtl28xxu
usb 1-2: dvb_usb_v2: found a 'Realtek RTL2832U reference design' in warm state
usb 1-2: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
DVB: registering new adapter (Realtek RTL2832U reference design)
usb 1-2: DVB: registering adapter 1 frontend 0 (Realtek RTL2832 (DVB-T))...
i2c i2c-0: e4000: Elonics E4000 successfully identified
usb 1-2: dvb_usb_v2: 'Realtek RTL2832U reference design' successfully initialized and connected
Click to expand...

I've a similar device and I can confirm that is correctly detected.
You should see it into Tuner Setup panel on Enigma2 but the capabilities of this kind of sticks are not very good and my stick can tune only 10% of DVB-T services broadcasted in my region
 
Hi all
Is there eny new development for these sticks?
i just found my stick in the drawer again and are curious :)
 
You must log in or register to reply here.
Back
Top