Is it possible to have Open Black hole and the new Vu+ image 3.0 in multiboot? I have tried but it is not working for me. I always get crash and need to reflash OBH to flash.
Is it because of the different drivers and Kernel?
Using Vu+ SoloSE V2.
Thanks, but I already have OpenVix and Openpli installed on the USB pen, so that part works fine.
Will try with a newer version of OE 3.0, the one I tried was from 2015-10-21 and there are more newer now.
As a side note, will there be a OBH based on OE 3.0? Or is it not stable enough?
So reading this thread:
OE 2.0 and OE 3.0 are compatibles?.. Can run both on the same receiver?
Reading the information on the OE 3.0 imagen says :
WARNING: This Image has the latest drivers and CAN NOT be installed in multiboot. The image MUST be installed in flash.
But According with your results OE 3.0 imagen can run (in boot) into Open Black Hole 2.0 (flash) imagen..
right??
Hi munigaia,do you have Multiboot Menu when booting??I have BH 3.01C(Vu+Solo2) in flash with OpenMultiboot installed but i dont have OMB Menu??
Any help-suggestion on this issue mate??
Thanks and cheers
Done that already mate,but no Multiboot Menu when booting,have tried almost everything,no jpy.
Thanks for the reply mate,cheers.
I have opened the openMultiboot Manager on my Vu+ Duo with BH 3.0.1 in flash and the following three images stored below : 1) vti-image-bm750-20151117144823_vti_9-0-1_usb 2) Black Hole 2.1.7 and 3) OpenPLi-4.0-beta-vuduo-2015-1208_usb . When I push OK on for instance the vti image I get the question "Set next boot to vti-image-bm750-20151117144823_vti_9_0_1_usb" and get the option YES/NO. When I press YES my Vu+ Duo starts rebooting, but after a while it boots with the image BH 3.0.1 (which I have in flash )still there, but no VTI image . What is wrong ? Why doesn't the vti image start ?Thanks for your reply, indeed doesn´t work, i´ll report this issue.
best regards
nunigaia
I have opened the openMultiboot Manager on my Vu+ Duo with BH 3.0.1 in flash and the following three images stored below : 1) vti-image-bm750-20151117144823_vti_9-0-1_usb 2) Black Hole 2.1.7 and 3) OpenPLi-4.0-beta-vuduo-2015-1208_usb . When I push OK on for instance the vti image I get the question "Set next boot to vti-image-bm750-20151117144823_vti_9_0_1_usb" and get the option YES/NO. When I press YES my Vu+ Duo starts rebooting, but after a while it boots with the image BH 3.0.1 (which I have in flash )still there, but no VTI image . What is wrong ? Why doesn't the vti image start ?
Forget it,with Blackhole in flash the plugin openmultiboot only works at Nunigaia.I have opened the openMultiboot Manager on my Vu+ Duo with BH 3.0.1 in flash and the following three images stored below : 1) vti-image-bm750-20151117144823_vti_9-0-1_usb 2) Black Hole 2.1.7 and 3) OpenPLi-4.0-beta-vuduo-2015-1208_usb . When I push OK on for instance the vti image I get the question "Set next boot to vti-image-bm750-20151117144823_vti_9_0_1_usb" and get the option YES/NO. When I press YES my Vu+ Duo starts rebooting, but after a while it boots with the image BH 3.0.1 (which I have in flash )still there, but no VTI image . What is wrong ? Why doesn't the vti image start ?
Forget it,with Blackhole in flash the plugin openmultiboot only works at Nunigaia.
Thanks for your answer..Right. ATM i have Blackhole 3.0.1 in flash and other images in Open Multiboot, including Open BlackHole 0.1.
Thanks for your answer..
Is possible opposite set up ?
Open black hole 0.1 (flash) & Blackhole 3.0.1 (boot) ?,..
Probably not due the message:
WARNING: This Image has the latest drivers and CAN NOT be installed in multiboot. The image MUST be installed in flash.
If your answer is Not. What are my options with my current installation (open black hole (flash), and the rest of images in boot:
I am thinking:
1) I need unplug my usb (stored all boot images)
2) flash my receiver using Black hole 3.0.1
3) plug my usb and use my Boot images
or I need to start all multiboot process again using Black hole 3.0.1 in flash
pd: sorry "kurben" to "hack" your thread
Does this mean that images installed in multiboot won't work at all ? Why not ? I flashed Black Hole 3.0.1 on my Vu+ Duo and installed three images, but when I tried to open them nothing happened except restasting BH 3.0.1 .The message is related to old meoboot and barry allen and will be removed.
With openmultiboot you can install in multiboot every image and also bh (if it will works or not is another problem ah ah ah ).