problem after installing black hole 1.7.8

[saetb]

i have vu+ uno with black hole image 1.7.3 ,i downloaded the latest version which is 1.7.8 and i install it
after i finished the installation receiver wouldn't start , it just say starting and the screen of my tv is blue .
hope you can help me in this one

 

[Mito]

You need to upgrade your Uno FPGA before to install the BH 1.7.8.
http://vuplus-community.net/board/threads/vu-uno-firmware-upgrade.2955/

 

[XabiX]

I did the same but couldn't find a way to now upgrade the FGPA as I can't access the FGPA plugin with a local .dat file or neither download from the internet.

how did you get it working?

THANKS

 

[a911]

I did the same but couldn't find a way to now upgrade the FGPA as I can't access the FGPA plugin with a local .dat file or neither download from the internet.

how did you get it working?

THANKS

Try (Option A)
Using USB memory stick ( unzip directly to USB, if U wish)

1. Download the file named TS_PRO.dat_FPGA_4.5.zip attached to this post and unzip it.
2. Copy the file TS_PRO.dat into USB memory stick.
3. Attach USB memory stick to your box and restart. (or restart GUI)
4. Goto FPGA plugin menu.
5. Select the data file in USB memory stick and start 'Upgrade'.
6. Restart your box.

This good way set by Mito

 

[XabiX]

Try (Option A)
Using USB memory stick ( unzip directly to USB, if U wish)

1. Download the file named TS_PRO.dat_FPGA_4.5.zip attached to this post and unzip it.
2. Copy the file TS_PRO.dat into USB memory stick.
3. Attach USB memory stick to your box and restart. (or restart GUI)
4. Goto FPGA plugin menu.
5. Select the data file in USB memory stick and start 'Upgrade'.
6. Restart your box.

This good way set by Mito

the issue is that the box doesn't boot so I can't go to any menu :-(

 

[a911]

the issue is that the box doesn't boot so I can't go to any menu :-(

Try to re boot using DCC (FTP) program!
If U can not ,try re flash to the old BH U had!