SCR Spaun Sus 21 FI setup

[KingNaples]

Hi All,
I just got my Spaun SUS 21FI purchased to convert the centralized line I have in a scr system with 2 channel. I'm trying to configure on my DUO2 equipped with the dual sat boad.
Unlickely the SCR 1 channel that has a frequency of 1210 don't work. on the same tuner if I select the position SCR 2 with frequency 1420 everything working fine. The only strange thinks that I noticed is related to the user manual where the channel are named SCR0 and SCR1 but in the Black Hole configuration we start from the SCR1 channel.
Any ideas abot the correct configuration to use?

Thanks in advance

 

[nunigaia]

Try this combination and adapt to your instalallation

I hope it solves your installation trouble.

Read this post ---> http://www.vuplus-community.net/board/threads/howto-usals-motorized-dish-and-scr-unicable-lnb.13352/

best regards
nunigaia

Test and reply

 

[Eragon]

=

The only strange thinks that I noticed is related to the user manual where the channel are named SCR0 and SCR1 but in the Black Hole configuration we start from the SCR1 channel.

0 = 1
1 = 2
2 = 3
3 = 4

 

[KingNaples]

I have just solved the problem that was due to my miss understanding of the SUS 21FI functionality.
Pratically needs two free multiswitch position to do his scr job.
Actually I'm using a splitter on my main cable that i have connected to the SUS 21 imputs.
I need to verify if with this configuration I'll face same usual problem of multiple tuner on same cable!
Also I've read the suggested post with a lot of learning!

 

[nunigaia]

Hope it solves your problems!

best regards
nunigaia