This board is now closed. The Blackhole image ended in 2020. The board will remain available in Read Only Mode, so all the posts from the last 15+ years are not lost. We thank you for being part of the community for the last 15+ years. You can join the OpenBh board if you have not already done so at www.openbh.net.

Skin for vu solo ?

A

allu

Vu+ Newbie
What skin can be used for a vu solo with BH 2.0.9, which allows to see the picons in the channel list?
 
allu said:
What skin can be used for a vu solo with BH 2.0.9, which allows to see the picons in the channel list?
Click to expand...

The image you are referring to is no more supported, though install the lastest BlackHole 3.0.9 image!

best regards
nunigaia
 
But I have a problem
When I install version 3.0.9 in the flash of my vu Solo, I can hardly do anything because the Vu becomes very slow since the flash is almost full.
That's why I have to use this old version
Could you help me?
 
allu said:
But I have a problem
When I install version 3.0.9 in the flash of my vu Solo, I can hardly do anything because the Vu becomes very slow since the flash is almost full.
That's why I have to use this old version
Could you help me?
Click to expand...

If you pay some attention ( big attention ) to threads already posted, you have an answer for all:

1) Your STB is very old, regarding hardware ( flash memory, processor, etc ... ).

2) You might use Open Multiboot!

3) Flash your STB with per example ( Open BlackHole ( lastest release )) - i.e. ( with the minimal settings ), and only just for booting, to not fill up your flash memory.

4) Use Open Multiboot to unpack other images, and then you will have lots of space for installing what you want and run for example: BlackHole 3.0.9 image

best regards
nunigaia

Note: This was previously higher recommended.
 
You must log in or register to reply here.
Back
Top