Solo 4k and DUR-Line uk 119 LNB

[db49er]

I have just installed this LNB and discovered that the only ones listed in the configuration pages are 101, 102 and 124. I have tried all of them and manual configuration for many hours but no success. The cable is directly linked to No. 1 LNB input as I thought it best to start with a setup I knew worked with the old LNB. I am using OpenVix but I do not suppose that the image will make any difference.

If anyone has any suggestions they would be much appreciated.

Thank you

 

[Blarren]

The 119 model is not included in the unicable.xml version you have.
Try to find another updated file and exchange the one in usr/share/enigma2.
A user defined install should work with the parameters from the LNB manual:

CH01: 1076 MHz CH09: 975 MHz CH17: 1840 MHz
CH02: 1178 MHz CH10: 1025 MHz CH18: 1880 MHz
CH03: 1280 MHz CH11: 1225 MHz CH19: 1920 MHz
CH04: 1382 MHz CH12: 1330 MHz CH20: 1960 MHz
CH05: 1484 MHz CH13: 1430 MHz CH21: 2000 MHz
CH06: 1586 MHz CH14: 1535 MHz CH22: 2040 MHz
CH07: 1688 MHz CH15: 1630 MHz CH23: 2080 MHz
CH08: 1790 MHz CH16: 1730 MHz CH24: 2125 MHz

CH01 - CH08: EN50494 & EN50607 (Unicable 1)
CH09 - CH24: EN50607 (dCSS / JESS / Unicable 2)

Low Band: 10.70 / 11.70 GHz High Band: 11.70 / 12.85 GHz

 

[Blarren]

Here's one from hxxps://github.com/openatv/enigma2/blob/master/data/unicable.xml
Unpack RAR and put in usr/share/enigma2 folder