Strange trouble with 1.7.7 and 1.7.8

[stpierre]

Hi to all,
I have tried the 1.7.7 and 1.7.8 BlackHole version on my ultimo with this config.
Tuner A = DVB-S2 with diseqc 1.1 and 10 satellites
Tuner B = DVB-S2 with motor Usals
Tuner C = DVB-T
I have problem with Tuner B, the dish is moving correctly to the position, the quality % is OK but the picture is freezing constantly !
This bug is same on all the satellites.
No problem with Tuner A and C.

No trouble with previous versions : 1.7.6 ---> 1.7.0 with same config. of course !

 

[bojja]

I don't have ultimo,but for Tuner B waht setup did you made for usals?You should try diseqc 1.2 even for usals.

 

[stpierre]

Thanks "bojja" for reply but I have "No trouble with previous versions : 1.7.6 ---> 1.7.0 with same config. of course !"

 

[Mehdi Gholinejad]

i have another problem and that is about internet connection.
after i setup 1.7.8 my connection was disable for those lan or wifi.
is there anybody who could help me?

 

[a911]

i have another problem and that is about internet connection.
after i setup 1.7.8 my connection was disable for those lan or wifi.
is there anybody who could help me?

If I understood your Q? correctly,,I think its IP Address conflict with other WiFi connections, may be caused by the router!

Try the following,

Menu>setup>system>Net Work>Adopter settings>US DHCP....(@ RC < > , make a change to)......NO!

 

[fumbduck]

i have another problem and that is about internet connection.
after i setup 1.7.8 my connection was disable for those lan or wifi.
is there anybody who could help me?

You should really have started your own thread about your specific problem, now you take attention away from stpierre's problem

 

[Mehdi Gholinejad]

You should really have started your own thread about your specific problem, now you take attention away from stpierre's problem

Sorry
I will do that


Sent from my iPad using Tapatalk HD

 

[stpierre]

I have tried with official image : "vuplus-image-vuultimo-20121009062827_usb"
I have the same problem.
Return to BlackHole 1.7.6 and all is ok !

 

[stpierre]

Update FPGA to v 4.5 and all is OK !

 

[mmattys30]

My lnb2 is doing the same