This board is now closed. The Blackhole image ended in 2020. The board will remain available in Read Only Mode, so all the posts from the last 15+ years are not lost. We thank you for being part of the community for the last 15+ years. You can join the OpenBh board if you have not already done so at www.openbh.net.

Stuck on boot loop (Exit code 5)

silly_me

silly_me

Vu+ Newbie
I have downloaded the latest image 1.7.1.

Everything went well...

I set up the network and rebooted....

Now im left with this:-


213km7o.jpg


How can i sort this out please.....

I had previously tried a "ready" back up from a poster but that image does exactly the same??

thanks all
 

Attachments

  • screen dump.jpg
    screen dump.jpg
    544.5 KB · Views: 14
for quick fix reflash your box agian
but i think something on your plugin but expert in here can help you more
 
For quick fix without reflash simply delete file
/etc/enigma2/automounts.xml
And will be back ok.
 
ok....

my box is wireless to router @ 192.168.1.10

when i telnet to this address, i have no success?

Just did another flash with the latest image off this site and same problem??

Am I missing something?:mad:
 
try another image.
maybe it is hardware problem of your vuultimo
Do you have added something? like cam module or other hardware ?
If yes remove it.
 
hi shiro,

I have tried open pli image and no problems , like this boot loop error?

I have no hardware attached to the Ultimo, i literally flash the image, ftp a channel list over - reboot...

Then I get this error *_(

What does the screen dump tell you from its code?
 
OK....

1) i downloaded the latest image 1.7.1
2) everything flashed ok.....
3) set the tuners up as single & equal too
4)reboot
5)doah!!!!!!!!!!!!!! -- same image as above..

What worries me, the Ultimo could be faulty??
But that said, the latest open pli works without issues...

I am confused......
 
No your ultimo is ok.
i think we have understood the problem now.
When you upload your channel list in /etc/enigma2 you upload too a corrupted file Pheraps is /etc/enigma2/automounts.xml that is corrupted.
So DON'T upload that file from your settings.
Or better use a new channel settings package.
 
hi again all,

well, i downloaded the 1.7.1 usb image.
it installed ok...
i have no other devices installed
it installed ok and I used one of the channel lists from the BH feed.

everything seems ok and i can view the fta channels....

Now that it appears ok, i put in a usb key in front and mount it to media/usb - (i think)

I reboot the box and i get the dam boot loop again??:mad:

If i take out the mounted usb key, it makes no difference....

I have now decided, reluctantly, to reflash with Open Pli as this image seems to work ok with my box.

I will try BH again, when we move to a newer revision


thanks all:thanks:
 
Very strange, do you have another usb stick you can try ?

Not all sticks work well with linux box's and there is a possibility that some images will work better with some usb sticks than others as they might use different usb drivers.
 
silly_me said:
reflashed with latest imqge v1.72 --- alls well!!!

thanks all
Click to expand...
Good to hear it's all working as it should now.

Shame we didn't findout what was causing the original issue, but atleast whatever it was is no longer an issue anyway :)
 
You must log in or register to reply here.
Back
Top