I have a problem getting the TT 4400 v2 to work on BH 2.1.5.
The modules seems to be loading correctly except for the IR.
I downloaded the correct firmware and placed in /lib/firmware but it doesn't get that far.
Here's the output from dmesg. Seems that there is a problem attaching it to a frontend.
Anyone got any idea how to solve this?
Thanks in advance!
The modules seems to be loading correctly except for the IR.
I downloaded the correct firmware and placed in /lib/firmware but it doesn't get that far.
Here's the output from dmesg. Seems that there is a problem attaching it to a frontend.
dvb-usb: found a 'TechnoTrend TVStick CT2-4400' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
DVB: registering new adapter (TechnoTrend TVStick CT2-4400)
dvb-usb: MAC address: bc:ea:2b:44:02:45
i2c i2c-0: Added multiplexed i2c bus 1
si2168 0-0064: Silicon Labs Si2168 successfully attached
dvb-usb: no frontend was attached by 'TechnoTrend TVStick CT2-4400'
IR keymap rc-tt-1500 not found
Registered IR keymap rc-empty
input: IR-receiver inside an USB DVB receiver as /devices/platform/ehci-brcm.0/usb1/1-1/bh-rc/rc0/input0
rc0: IR-receiver inside an USB DVB receiver as /devices/platform/ehci-brcm.0/usb1/1-1/bh-rc/rc0
dvb-usb: schedule remote query interval to 150 msecs.
dvb-usb: TechnoTrend TVStick CT2-4400 successfully initialized and connected.
usbcore: registered new interface driver dvb_usb_cxusb
Anyone got any idea how to solve this?
Thanks in advance!