Vu+duo problem (no picture)

P

pentreti

Vu+ Newbie
Hello..New problem appeared to my stb..I open the stb and after 2-3 minutes the screen is black..dont know what is happening.Maybe a tuner problem,maybe a capasitor or something..i changed image,but blank screen still remains.
 
As i noticed the signal of any channel is not as much perfect as it was..but i checked the dish and it is in perfect position!Has anybody experienced such a problem to his vu+duo?
P.s. Sorry if my english is not too good for anyone to understand
 
You are using a Diseqc switch? Try connecting the receiver, directly to one of your LNB's, and see if it still cuts out.
 
well,i have done something else..i have put the device that settles the lnb with the satelite(sorry,dont know how it is called) directly to the cable that goes to the reciever..I have a clear screen view in the tv that way..even it is hotbird,astra etc..So something must be wrong with the reciever:(
 
I cant imagine i am the first that experience this..is it a tuner problem?maybe capasitors?what should i do?why is this happening?i cant return to factory settings also..it starts blackhole from the beginning..please help
 
I'm not sure how anyone can help, as I still don't quite understand your satellite set up, or your problem.
I can't even understand your previous post:

"well,i have done something else..i have put the device that settles the lnb with the satelite(sorry,dont know how it is called) directly to the cable that goes to the reciever..I have a clear screen view in the tv that way..even it is hotbird,astra etc..So something must be wrong with the reciever:("

Can you please post some technical information, and better describe your problem.
How many satellite dishes, LNB's, do you have connected to your VU+ receiver?
Are you using a Diseqc switch, which connects multiple LNB's?
What exactly is happening, when you boot up your receiver, are you able to view a channel, for 2-3 minutes, and then it goes off, or something else?
 
Mick12334 said:
I'm not sure how anyone can help, as I still don't quite understand your satellite set up, or your problem.
I can't even understand your previous post:

"well,i have done something else..i have put the device that settles the lnb with the satelite(sorry,dont know how it is called) directly to the cable that goes to the reciever..I have a clear screen view in the tv that way..even it is hotbird,astra etc..So something must be wrong with the reciever:("

Can you please post some technical information, and better describe your problem.
How many satellite dishes, LNB's, do you have connected to your VU+ receiver?
Are you using a Diseqc switch, which connects multiple LNB's?
What exactly is happening, when you boot up your receiver, are you able to view a channel, for 2-3 minutes, and then it goes off, or something else?
Click to expand...
well,my problem is that i cant see anything in any satelite,lnb or tuner..
I disconnected the reciever from power point(electicity) for days and when i put it on again i was able to view a channel for 2-3 minutes,then signal seemed to be gone!
In tuner A,i have 4 lnbs with diseq(first dish 13-19-9)(second dish 28) and in tuner B i use motorized lnb..
when i boot everything seems to work(menu-lists etc..)but cant watch anything..No problems with the dishes,lnbs,or diseq,cause as i said when i put a satelite finder to the cable that goes to tuner A or B i can watch every channel
 
Nobody was able to help from here but now the reciever works again..
Just changed about 13 capasitors that they were off..Hope nobody would ever experience this problem..After years capasitors are dying in the reciever!
 
You must log in or register to reply here.
Back
Top