vu+ solo2 Freezing and Crashing

[okidokiss]

HI ALL!!!
I really need your help.
This box keep freezing and crashing randomly. I've tried several configurations from scratch also the simplest configuration as possible, but no positive results.
The main problems are:

1 - Image freezes with no apparent reason. The box does not respond to the remote, the only solution is to power off and on again. While is in this state, it does respond to telnet and shared folders. Webif is unavailable. No crashlog is created.

2 - Random crash with automatic recover. Attached here the crashlog.

3 - Trying to solve this problems, I bought an internal SATA HDD, it works ok but also randomly it's just not available anymore. After reboot I must remap to get it back.

This seems to be a good satellite box, but with all this problems it's hard to handle.
Hope you can help me.

You can see all my config here: i.imgur.com/aJCkBxR.png

 

[angelofsky1980]

HI ALL!!!
I really need your help.
This box keep freezing and crashing randomly. I've tried several configurations from scratch also the simplest configuration as possible, but no positive results.
The main problems are:

1 - Image freezes with no apparent reason. The box does not respond to the remote, the only solution is to power off and on again. While is in this state, it does respond to telnet and shared folders. Webif is unavailable. No crashlog is created.

2 - Random crash with automatic recover. Attached here the crashlog.

3 - Trying to solve this problems, I bought an internal SATA HDD, it works ok but also randomly it's just not available anymore. After reboot I must remap to get it back.

This seems to be a good satellite box, but with all this problems it's hard to handle.
Hope you can help me.

You can see all my config here: i.imgur.com/aJCkBxR.png

From your crashlog seems a corrupted EPG data.

 

[okidokiss]

From your crashlog seems a corrupted EPG data.

Thank you for analyzing the crashlog, but it happens so often, what can I do to solve it.
Could be the same reason for point 1 and/or 3?

 

[angelofsky1980]

Thank you for analyzing the crashlog, but it happens so often, what can I do to solve it.
Could be the same reason for point 1 and/or 3?

The missing map of your HDD should be involved to box crash. You should solve it map your storage device and reboot immediately your box.
About EPG, try to disable it (BH EPG or CrossEPG) and verify if all works correctly after a while.

 

[okidokiss]

The missing map of your HDD should be involved to box crash. You should solve it map your storage device and reboot immediately your box.
About EPG, try to disable it (BH EPG or CrossEPG) and verify if all works correctly after a while.

I'll try that and report the results
Thank you!

 

[phil32]

I had also freezing on my Vu solo2 (OpenVix 3.2) specially when recording and playing at the same time. I found the problem related to EPG loading after deep standby.

Since then I only switch to standby I don't have this problem anymore. i believe it is when saving and loadind the epg.dat file something goes wrong, although EPG seems ok.

If I want to switch to deep standby or restart, I delete the epg before.