vu+ ultimo and diseqc 1.2 motor settings

kostassatcom

kostassatcom

Vu+ Newbie
hello to all,i have vu+ ultimo with the last image.My question is (because i conflused a little bit...) i have conected my box with diseqc 1.2 motorised system.in the menu what tuner settings should give?
Configuration mode Advanced
Satellite (the first satellite i would like to store e.g hispasat)
LNB LNB1 (the next satellite this will be LNB2 or let it LNB1 for all satellites????)
Priority AUTO????
LOF UNIVERSAL LNB
Voltage Mode Polarisation????
Increased voltage NO
Tone mode Band?
Diseqc mode 1.2
Tone burst None?????
Committed diseqc command None?????
Fast Diseqc No????
Sequence reapeat No????
Command order ???????
Uncommited diseqc Command ???????
Diseqc repeats None????

I try with usals and everithing is ok.but i want to set up my satellie with order position :)
thanks for the help
 
LNB LNB1 (use LNB1 for all satellites)
Priority AUTO
LOF UNIVERSAL LNB
Voltage Mode Polarisation
Increased voltage NO (you can try increased voltage, it is supposed to help on weak signals, but i've never really noticed much if any difference)
Tone mode Band
Diseqc mode 1.2
Tone burst None
Committed diseqc command None
Fast Diseqc No (you can try yes, don't think it makes much difference)
Sequence reapeat No
Command order (whatver the default setting it gives you is)
Uncommited diseqc Command (as above)
Diseqc repeats None
 
You must log in or register to reply here.
Back
Top