Vu Uno and USB Tuner as102

miamio82

miamio82

Vu+ Newbie
Hi guys,
I'm trying to use as102 key (sky digital key green led) on my vu uno bh 1.6.6.

Blue -> blue -> tuner usb and I installed pctv 74e drivers.

It was installed successfully and enabled it successfully but in configuration-> search chan -> config tuner, i've "dummy tuner" not supported.

Here is part of my dmesg...


as10x_usb: device has been detected
DVB: registering new adapter (SKY Italia Digital Key)
DVB: registering adapter 1 frontend 5 (SKY Italia Digital Key)...
as10x_usb: fimrware: as102_data1_st.hex loaded with success
as10x_usb: fimrware: as102_data2_st.hex loaded with success
usbcore: registered new driver Abilis Systems as10x usb driver
__pa invalid address 0xa1fb8000
Break instruction in kernel code[#1]:
Cpu 1
$ 0 : 00000000 10008b00 00000023 8032bb54
$ 4 : 8032bb50 10008b00 00400000 10008b01
$ 8 : 00000000 0000000a 00002824 80380000
$12 : 8038a8f2 0000004c 00000008 00000000
$16 : 827d2e08 a1fb8000 ef05bf80 00000020
$20 : 80389140 00000014 00000000 2aac6358
$24 : 00000000 00000000
$28 : ef08e000 ef08fb90 7fbb4c80 8001d2dc
Hi : 00000280
Lo : 00000230
epc : 8001d2dc dma_map_single+0x88/0x134 Tainted: P
ra : 8001d2dc dma_map_single+0x88/0x134
Status: 10008b03 KERNEL EXL IE
Cause : 00800024
PrId : 0002a044
Modules linked in: dvb_as102 udf ext2 ntfs vfat fat sr_mod cdrom usb_storage cifs isofs fpga_directc brcmfb fb dvb_bcm7413 dvb_core procmk snd_pcm snd_timer snd_page_alloc snd soundcore firmware_class i2c_dev i2c_core evdev input sata_svw libata
Process usbtuner (pid: 729, threadinfo=ef08e000, task=ef09d0b8)
Stack : 80390000 a1fb8000 00000080 00000002 ef05bf80 827d2c00 803f2824 801f5e18
00000008 0000000a 80386570 803862b8 80387104 80392dc0 00000001 80040b80
803277b4 00040000 80390000 fffbffff 80387108 80066f68 10008b00 c0d76000
803a9c0c ffc00000 00400000 c0d75fff c0d76000 ef27e338 e01e7a80 80040d4c
ffc00000 00400000 c0d75fff c0d76000 c0cce000 80007fe0 eff4c704 c06f5f80
...
Call Trace:
[<8001d2dc>] dma_map_single+0x88/0x134
[<801f5e18>] hcd_submit_urb+0x1f0/0xa2c
[<c0489680>] as102_submit_urb_stream+0x68/0xe0 [dvb_as102]
[<c048973c>] as102_usb_start_stream+0x44/0x80 [dvb_as102]
[<c0487618>] as102_dvb_dmx_start_feed+0xac/0x174 [dvb_as102]
[<c0121418>] dmx_ts_feed_start_filtering+0x64/0x150 [dvb_core]
[<c011cf34>] dvb_dmxdev_start_feed+0xd4/0x158 [dvb_core]
[<c011ec20>] dvb_dmxdev_filter_start+0x310/0x4e8 [dvb_core]
[<c011f7ac>] dvb_demux_do_ioctl+0x2ec/0x760 [dvb_core]
[<c011c634>] dvb_usercopy+0x108/0x1f0 [dvb_core]
[<c011d9cc>] dvb_demux_ioctl+0x24/0x30 [dvb_core]
[<800be5b4>] do_ioctl+0xa4/0xb4
[<800be630>] vfs_ioctl+0x6c/0x3ac
[<800be9b4>] sys_ioctl+0x44/0xa0
[<80014118>] stack_done+0x20/0x3c


Code: 24846378 0c00df03 02202821 <0200000d> 00002821 02002021 8fbf001c 8fb10018 8fb00014
[LCD]: unknown cmd 0x1015


Thank you!
 
M

mrcapitan

Vu+ Newbie
angelofsky1980 said:
You should take some patience. I should study a solution for Uno problem.
Click to expand...

Uffff, Miamio, It means you will have to wait a lot of months for get a solution, I had the same problem on other tuners some months ago and I am still waiting the solution for the tuners drivers...
 
miamio82

miamio82

Vu+ Newbie
I installed bh 1.7.0 and v0.3.8 usb drivers, but vu uno freeze on BOOTING screen if my AS102 is inside the usb port.
If i remove the AS102 and reboot the vu uno, everything works properly.
Here is the dmesg:

dvb_as102: module is from the staging directory, the quality is unknown, you have been warned.
as10x_usb: device has been detected
DVB: registering new adapter (Sky IT Digital Key (green led))
DVB: registering adapter 1 frontend 0 (Sky IT Digital Key (green led))...
as10x_usb: firmware: as102_data1_st.hex loaded with success
as10x_usb: firmware: as102_data2_st.hex loaded with success
Registered device Sky IT Digital Key (green led)
usbcore: registered new interface driver Abilis Systems as10x usb driver
[VID]: VIDEO_SET_STREAMTYPE 0
[VID]: VIDEO_SELECT_SOURCE 1
[VID]: VIDEO_PLAY 1 2 0
[VID]: VIDEO_CONTINUE 1 1
[VID]: VIDEO_CLEAR_BUFFER 1 1 0
[VID]: VIDEO_STOP 0 1
[VID]: VIDEO_SELECT_SOURCE 0
kjournald starting. Commit interval 5 seconds
EXT3-fs (sda1): warning: maximal mount count reached, running e2fsck is recommended
EXT3-fs (sda1): using internal journal
EXT3-fs (sda1): mounted filesystem with writeback data mode
CPU 0 Unable to handle kernel paging request at virtual address 007c1500, epc == 80010d44, ra == 803c1f30
Oops[#1]:
Cpu 0
$ 0 : 00000000 10008701 00000200 80010d30
$ 4 : cfc4c188 007c1500 00000000 00000200
$ 8 : 00000000 00000005 800d8b34 fffffff8
$12 : 00000000 ffffffff 00000000 00410000
$16 : cff7b880 cfcc6800 00000002 00000000
$20 : e1135000 80684a40 cff7b888 00000015
$24 : 00414074 777eb50c
$28 : ce0ea000 ce0ebbc8 0007a120 803c1f30
Hi : 00000000
Lo : 00000000
epc : 80010d44 mips_dma_map_page+0x14/0x104
Tainted: P C
ra : 803c1f30 usb_hcd_map_urb_for_dma+0x338/0x4a8
Status: 10008703 KERNEL EXL IE
Cause : 00800008
BadVA : 007c1500
PrId : 0002a044 (Brcm4380)
Modules linked in: dvb_as102(C) fpga_directc(P) brcmfb dvb_bcm7413(P) procmk
Process usbtuner (pid: 557, threadinfo=ce0ea000, task=ce0b9b88, tls=778d9490)
Stack : 807000e0 00000000 00000000 813b1074 cff7b880 cfcc6800 00000002 803c1f30
00000000 00000000 00000000 00000000 00000002 00000000 806b11a0 01000000
cff7b880 cff7b880 cfed4800 cfcc6800 00000020 e1135000 80684a40 cff7b888
00000015 803c2368 00000000 00000001 00000000 ffffffff 0000001f fffcd000
806b17a0 00000000 00000000 806b17a4 00000000 00000000 000002d2 cfed4800
...
Call Trace:
[<80010d44>] mips_dma_map_page+0x14/0x104
[<803c1f30>] usb_hcd_map_urb_for_dma+0x338/0x4a8
[<803c2368>] usb_hcd_submit_urb+0x2c8/0x8cc
[<e100b560>] as102_submit_urb_stream+0x5c/0xa8 [dvb_as102]
[<e100b5f0>] as102_usb_start_stream+0x44/0x80 [dvb_as102]
[<e10096a4>] as102_dvb_dmx_start_feed+0xb4/0x180 [dvb_as102]
[<80409584>] dmx_ts_feed_start_filtering+0x5c/0x134
[<804058d4>] dvb_dmxdev_start_feed+0xd4/0x158
[<80407350>] dvb_dmxdev_filter_start+0x2b8/0x448
[<80407d98>] dvb_demux_do_ioctl+0x464/0x6bc
[<8040510c>] dvb_usercopy+0x124/0x204
[<800d8504>] do_vfs_ioctl+0xa0/0x6d0
[<800d8b78>] sys_ioctl+0x44/0xa8
[<8000ec9c>] stack_done+0x20/0x40


Code: afb10014 afb00010 afbf001c <8ca30000> 3c028070 00031e42 000318c0 244200e0 00431021
---[ end trace c7c64a780af575b0 ]---
root@vuuno:/media/usb#
 
angelofsky1980

angelofsky1980

BlackHole Driver Specialist
miamio82 said:
I installed bh 1.7.0 and v0.3.8 usb drivers, but vu uno freeze on BOOTING screen if my AS102 is inside the usb port.
If i remove the AS102 and reboot the vu uno, everything works properly.
Here is the dmesg:

dvb_as102: module is from the staging directory, the quality is unknown, you have been warned.
as10x_usb: device has been detected
DVB: registering new adapter (Sky IT Digital Key (green led))
DVB: registering adapter 1 frontend 0 (Sky IT Digital Key (green led))...
as10x_usb: firmware: as102_data1_st.hex loaded with success
as10x_usb: firmware: as102_data2_st.hex loaded with success
Registered device Sky IT Digital Key (green led)
usbcore: registered new interface driver Abilis Systems as10x usb driver
[VID]: VIDEO_SET_STREAMTYPE 0
[VID]: VIDEO_SELECT_SOURCE 1
[VID]: VIDEO_PLAY 1 2 0
[VID]: VIDEO_CONTINUE 1 1
[VID]: VIDEO_CLEAR_BUFFER 1 1 0
[VID]: VIDEO_STOP 0 1
[VID]: VIDEO_SELECT_SOURCE 0
kjournald starting. Commit interval 5 seconds
EXT3-fs (sda1): warning: maximal mount count reached, running e2fsck is recommended
EXT3-fs (sda1): using internal journal
EXT3-fs (sda1): mounted filesystem with writeback data mode
CPU 0 Unable to handle kernel paging request at virtual address 007c1500, epc == 80010d44, ra == 803c1f30
Oops[#1]:
Cpu 0
$ 0 : 00000000 10008701 00000200 80010d30
$ 4 : cfc4c188 007c1500 00000000 00000200
$ 8 : 00000000 00000005 800d8b34 fffffff8
$12 : 00000000 ffffffff 00000000 00410000
$16 : cff7b880 cfcc6800 00000002 00000000
$20 : e1135000 80684a40 cff7b888 00000015
$24 : 00414074 777eb50c
$28 : ce0ea000 ce0ebbc8 0007a120 803c1f30
Hi : 00000000
Lo : 00000000
epc : 80010d44 mips_dma_map_page+0x14/0x104
Tainted: P C
ra : 803c1f30 usb_hcd_map_urb_for_dma+0x338/0x4a8
Status: 10008703 KERNEL EXL IE
Cause : 00800008
BadVA : 007c1500
PrId : 0002a044 (Brcm4380)
Modules linked in: dvb_as102(C) fpga_directc(P) brcmfb dvb_bcm7413(P) procmk
Process usbtuner (pid: 557, threadinfo=ce0ea000, task=ce0b9b88, tls=778d9490)
Stack : 807000e0 00000000 00000000 813b1074 cff7b880 cfcc6800 00000002 803c1f30
00000000 00000000 00000000 00000000 00000002 00000000 806b11a0 01000000
cff7b880 cff7b880 cfed4800 cfcc6800 00000020 e1135000 80684a40 cff7b888
00000015 803c2368 00000000 00000001 00000000 ffffffff 0000001f fffcd000
806b17a0 00000000 00000000 806b17a4 00000000 00000000 000002d2 cfed4800
...
Call Trace:
[<80010d44>] mips_dma_map_page+0x14/0x104
[<803c1f30>] usb_hcd_map_urb_for_dma+0x338/0x4a8
[<803c2368>] usb_hcd_submit_urb+0x2c8/0x8cc
[<e100b560>] as102_submit_urb_stream+0x5c/0xa8 [dvb_as102]
[<e100b5f0>] as102_usb_start_stream+0x44/0x80 [dvb_as102]
[<e10096a4>] as102_dvb_dmx_start_feed+0xb4/0x180 [dvb_as102]
[<80409584>] dmx_ts_feed_start_filtering+0x5c/0x134
[<804058d4>] dvb_dmxdev_start_feed+0xd4/0x158
[<80407350>] dvb_dmxdev_filter_start+0x2b8/0x448
[<80407d98>] dvb_demux_do_ioctl+0x464/0x6bc
[<8040510c>] dvb_usercopy+0x124/0x204
[<800d8504>] do_vfs_ioctl+0xa0/0x6d0
[<800d8b78>] sys_ioctl+0x44/0xa8
[<8000ec9c>] stack_done+0x20/0x40


Code: afb10014 afb00010 afbf001c <8ca30000> 3c028070 00031e42 000318c0 244200e0 00431021
---[ end trace c7c64a780af575b0 ]---
root@vuuno:/media/usb#
Click to expand...
I need some time to make checks and tests...
 
miamio82

miamio82

Vu+ Newbie
angelofsky1980 said:
I need some time to make checks and tests...
Click to expand...

I made other two tests:
- plugging on the as102 without restart, the vu uno freeze with the same dmesg of my previous post, I tried with all 3 usb ports.
- tried to put the as102 in an other decoder, it works correctly.
 
You must log in or register to reply here.
Top