This board is now closed. The Blackhole image ended in 2020. The board will remain available in Read Only Mode, so all the posts from the last 15+ years are not lost. We thank you for being part of the community for the last 15+ years. You can join the OpenBh board if you have not already done so at www.openbh.net.

Vu Zero 4k Signal

Hi! I had the same problem with 0% signal strength showed the image and on weak transponders the signal jumped 75% -25% Express AM6 53E etc. On strong transponders 100% showed. Don't buy VU + Zero 4K I sold it too. Of course it's good that it doesn't have FBC tuner, FBC tuner always shows less signal strength 15-20%, if my old VU-SOLO2 shows 100% then FBC tuner shows 15-20% less
I did not fix this bug I bought Vu + Zero 4K in 2019 and this bug was already in 2018
 
Again with this nonsense about signal strength: as written by many people many many times, the signal values showed by a STB have no meaning: STBs are not measurement devices.
What matters is: can you watch those channels or not?
 
It is a mistake from the first day of this receiver, brand more, no matter, the tuner you have is good, in the end comparing several receivers and a real test of the Astra at 28'2ºThis one can not tune the UK beam in Spain.
In Spanish for me.
----------------
Es un error desde el primer dia de este receptor, marca de mas, no importa, el sintonizador que tiene, es bueno, al final coparacion de varios receptores y una prueba real del Astra a 28'2ºEste que no se puede sintonizar el haz UK en España.
En español para mi.

Astra a 19'2ºE Canal Sur A. (Andalucía) 11156 V 22000 5/6, 80cm, LNB de 0'5dB.
VU+Zero4K tuner DVB-S2X
Señal/SNR 100% Calidad/AGC 99%
VU+Solo2
Señal/SNR 100% Calidad/AGC 86%
VU+Uno4K tuner DVB-S2
Señal/SNR 94% Calidad/AGC 65%
VU+Uno4K tuner DVB-S2X (quality difference)
ok.gif

Señal/SNR 94% Calidad/AGC 80%......Astra1KR

Astra 2G 28'2ºE, Gibertini 125cm, LNB 4SCR+3Legacy 0'1dB (DiSEqC 4x1)
5USA Bean UK 10964H 22000 5/6, Beam photo http://www.flysat-beams.com/astra28-beam.php

SNR 69% AGC 99%....VU+Zero4K
SNR 60% AGC 72%....VU+Ultimo4K/Uno4K
Calidad_tuner_zero4K.png
 
I deeply regret buying this device. The image pixelates, but it doesn't show this as BER. I can't tell if it's a signal issue or something else. I'm trying to watch Digitürk 4K channels using a module, but during transition scenes, there are mosaics. I thought it might be related to the module or overheating, but I noticed that similar issues occur on the FTA TRT 4K channel as well. I wish I had saved up a bit more and bought the Dreambox Two instead.

I've disconnected the Vu+ Zero 4K and hooked up my Vu+ Duo again. Now I'm watching 4K channels via streaming on Kodi.

Just like its name suggests, zero. 4K zero, 4K nothing!
 
You must log in or register to reply here.
Back
Top