Hallo guys,
My problem has been reported before. I read all the discussions I found, but still I cant solve it.
My new Vu Uno 4K Se (from Amazon) with the latest BH image (3.0.9)
When I switch channels, I get SNR 0% (or N/A) for a few moments. Very annoying indeed.
I have 4 LNBs on a fixed dish connected via a DiseqC switch.
I tried all possible tuner configurations (A simple and advanced with B not configured/equal to A/loop through A). I did the same with Tuner B.
I tested new cable.
Tested a new cable with only 1 new LNB (no DiseqC switch).
Did the tests with FCC mode on and off.
All my tests failed to solve this annoying problem.
Same problem with OBH as well.
Same setup works perfectly on my old Vu Solo2 (running also latest BH).
Any suggestions before returning the box?
Thanks in advance
My problem has been reported before. I read all the discussions I found, but still I cant solve it.
My new Vu Uno 4K Se (from Amazon) with the latest BH image (3.0.9)
When I switch channels, I get SNR 0% (or N/A) for a few moments. Very annoying indeed.
I have 4 LNBs on a fixed dish connected via a DiseqC switch.
I tried all possible tuner configurations (A simple and advanced with B not configured/equal to A/loop through A). I did the same with Tuner B.
I tested new cable.
Tested a new cable with only 1 new LNB (no DiseqC switch).
Did the tests with FCC mode on and off.
All my tests failed to solve this annoying problem.
Same problem with OBH as well.
Same setup works perfectly on my old Vu Solo2 (running also latest BH).
Any suggestions before returning the box?
Thanks in advance