Matrix10
Administrator
thanks, this was my first one..: went great
only I failed to set my wireless? I found it, but I could not save it nor connect to it.
Any idea might help??
Thanks
Go to Wlan Connection >> Adapter settings >>usb Wlan adapter>>
1. Scan Wireless AP
2.Do you see yours.
If you see go to it, and press the OK or green button
3.Go to Adapter settings
4.Use Device ON
5.Use DHCP YES
6. ESSID >There already should state the name of your Wi-Fi
7.Method> choose Metod (example: if you use WPA2 choose WPA2)
8. Key >>Write your key
9.Press OK >> OK >>
=================
Exit with red button and exit button
When you configure
Check if it works
If not restart your box and go back to Adapter settings
check if active if not enable ON
and try agn.
If you using static IP but also for DHCP you have to check
Nameserver settings and if not enter the address of your router.
Check twice if adapter enabled and config OK and Nameserver settings (Gateway IP from your router)
