NO On ABS-2 i can see channels on SR 45000 DVB-S2 but NOT on 51,5 E SR 45000 DVB-S2
3 diffeent TPs
But with solo2 i can!
View attachment 30999 View attachment 31000 As you can se no channels found on 51,5E
It is the same 98-100% i do hawe the same position on my dishYes but solo 2 shows I believe 10% more signal than duo2.
Again, how strong is the signal if you go to 52 E at the same frequency and polarization
As on 51.5. (Transponder you can not see on duo2)
I wonder if that is the problem ????
It is the same 98-100% i do hawe the same position on my dish
See my friend. That is why I repetadly said.duo2 has a problem. No solution is given by vu + development team. Very sad situation.I can receive this satellite.
I've added a new file satellites.xml
The problem exists on Duo2
On Ultimo 4K there is no problem.
See my friend. That is why I repetadly said.duo2 has a problem. No solution is given by vu + development team. Very sad situation.
Not all!
On ABS-2 75E 12153V DVB-S2 SR 45000 2/3 8 PSK i got all channels
Se post 3 from me there is a problem on SR 45000 on that satellit
Can you see Belintersat 1 at 51.5 ° EI can receive this satellite.
I've added a new file satellites.xml
The problem exists on Duo2
On Ultimo 4K there is no problem.
Can you see Belintersat 1 at 51.5 ° E
11290H SR 45000 DVB S2 fec 5/6
now?
Alredy tested that but not tested Direcly from LNB Will do that later.
As you can see from Matrix10 the Ultimo 4K Scan 41 channelsAfter transferring your channel list, from your Solo 2, to your Duo 2, with the 11290 H 45000 DVB-S2 8PSK 5/6 channels included, what happens when you select any of these channels on your Duo 2? Do you get an error message?
The VU+ Duo 2 has pluggable tuners, similar to a graphics card, in a PC, so you can change them, these are interchangable with the VU+ Uno, Ultimo, Duo 2, and Solo 4K models.
For a full test we need someone who has access to these models, and can receive 51.5E, to test each of these receivers, to see if they all fail to scan in the 3 Pantelio transponders, on 51.5E.
This way you can narrow the problem to the Tuner, or if others work, and the Duo 2 doesn't, then you can switch the tuner, if it still fails then you can narrow it down to the Duo 2's hardware, or firmware.
Diagnosing a fault takes time, and patience, and also access to a lot of genuine VU+ receivers.
Maybe a local supplier might help.
Some ar free.Well I said DUO2 there is no picture (no scan only 2 channels) and Ultimo 4K has TV pictures (coded , with EPG info).
The same antenna.
Both receivers have a signal over 80% channels with SR 45000
More than enough.
Ultimo 4K Scan 41 channels
Duo 2 Scan only 2 channels with SR 20000
Signal on both Duo2 (with uploaded channel list) and Ultimo 4K
No TV on DUO 2 only Belarus24 and Radio Belarus ( scan ok for this 2 channels with SR 20000)
Of course the channels are coded.
Belarus24 is free .
View attachment 31007
Some ar free.
https://www.lyngsat.com/Belintersat-1.html
This is free on my Solo2Yes, I see more FTA channels I did not look at a new scanning from Ultimo 4K
about 80 channels all scan