AlexWilMac
Moderator
Again!!! Don't choose ADVANCED in tuner configuration!!! Choose SIMPLE!
Thanks for this, tried that but can't loop through from virtual to physical. The only option I get from the physical tuners is either FBC Automatic or FBC SCR .. Maybe try a different image?Better use configuration mode simple and not advanced
if your antennas are physically well positioned.
one tuner I
Configuration mode simple
Mode postioner
Longitude and Latitude for your location
another physical tuner J
Configuration mode simple
Mode single
satellites 28.2
======================
or vice versa First J and second I
===========================
virtual tuners configs
Config Mode loopthrough
connected to each other and to physical tuners
Even I am no longer sure what these physical tuners are (letters)
because you seem to have configured the wrong tuners
and that's why nothing works.
Use Configuration mode simple
so it will be clearer.
Each physical tuner has three additional virtual tuners
The dual SAT tuner has a total of two physical and 6 virtual tuners.
Eight tuners that can be tuned independently to the desired transponder inside the receiver
But in early post you also write that you have a working configuration on your Duo2
How does those tuner setup look then?
maybe a matter of tuner priority,i have not testAny idea though why it wouldn't work in slot 2 ?