BlackHole 3.0.8 vusolo2
vusolo2 login: root
root@vusolo2:~# dmesg
console [ttyS0] enabled
bootconsole [early0] disabled
serial8250.0: ttyS1 at MMIO 0x10406940 (irq = 66, base_baud = 5062500) is a 16550A
serial8250.0: ttyS2 at MMIO 0x10406980 (irq = 67, base_baud = 5062500) is a 16550A
loop: module loaded
ahci strict-ahci.0: can't get clock
__clk_enable: sata [1]
bcm40nm_pm_sata_enable 00
ahci strict-ahci.0: SSS flag set, parallel bus scan disabled
ahci strict-ahci.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl platform mode
ahci strict-ahci.0: flags: ncq sntf stag clo slum part
scsi0 : ahci_platform
scsi1 : ahci_platform
ata1: SATA max UDMA/133 mmio [mem 0x10181000-0x10190fff] port 0x100 irq 41
ata2: SATA max UDMA/133 mmio [mem 0x10181000-0x10190fff] port 0x180 irq 41
brcmstb_nand: NAND controller driver is loaded
__clk_enable: network [1]
__clk_enable: enet [1]
bcm40nm_pm_genet_enable 00
Found PHY at Address 3
bcmgenet: configuring instance #0 for external RGMII
__clk_disable: enet [0]
bcm40nm_pm_genet_disable 00
__clk_disable: network [0]
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ata1: SATA link down (SStatus 0 SControl 300)
__clk_enable: usb [1]
bcm40nm_pm_usb_enable 00
ehci-brcm ehci-brcm.0: Broadcom STB EHCI
ehci-brcm ehci-brcm.0: new USB bus registered, assigned bus number 1
ehci-brcm ehci-brcm.0: irq 69, io mem 0x10480300
ehci-brcm ehci-brcm.0: USB 0.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
ehci-brcm ehci-brcm.1: Broadcom STB EHCI
ehci-brcm ehci-brcm.1: new USB bus registered, assigned bus number 2
ehci-brcm ehci-brcm.1: irq 70, io mem 0x10480500
ehci-brcm ehci-brcm.1: USB 0.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
ehci-brcm ehci-brcm.2: Broadcom STB EHCI
ehci-brcm ehci-brcm.2: new USB bus registered, assigned bus number 3
ehci-brcm ehci-brcm.2: irq 74, io mem 0x10490300
ehci-brcm ehci-brcm.2: USB 0.0 started, EHCI 1.00
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 1 port detected
ehci-brcm ehci-brcm.3: Broadcom STB EHCI
ehci-brcm ehci-brcm.3: new USB bus registered, assigned bus number 4
ehci-brcm ehci-brcm.3: irq 75, io mem 0x10490500
ehci-brcm ehci-brcm.3: USB 0.0 started, EHCI 1.00
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 1 port detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-brcm ohci-brcm.0: Broadcom STB OHCI
ohci-brcm ohci-brcm.0: new USB bus registered, assigned bus number 5
ohci-brcm ohci-brcm.0: irq 71, io mem 0x10480400
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 1 port detected
ohci-brcm ohci-brcm.1: Broadcom STB OHCI
ohci-brcm ohci-brcm.1: new USB bus registered, assigned bus number 6
ohci-brcm ohci-brcm.1: irq 72, io mem 0x10480600
ata2: SATA link down (SStatus 0 SControl 300)
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 1 port detected
ohci-brcm ohci-brcm.2: Broadcom STB OHCI
ohci-brcm ohci-brcm.2: new USB bus registered, assigned bus number 7
ohci-brcm ohci-brcm.2: irq 76, io mem 0x10490400
usb 2-1: new high-speed USB device number 2 using ehci-brcm
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 1 port detected
ohci-brcm ohci-brcm.3: Broadcom STB OHCI
ohci-brcm ohci-brcm.3: new USB bus registered, assigned bus number 8
ohci-brcm ohci-brcm.3: irq 77, io mem 0x10490600
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 1 port detected
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
Success! Registering the characther device success with 0
blackhole initialised
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
TCP: cubic registered
NET: Registered protocol family 17
Key type dns_resolver registered
PM: CP0 COUNT/COMPARE frequency does not depend on divisor
EBI CS0: setting up NAND flash (primary)
NAND device: Manufacturer ID: 0xec, Chip ID: 0xda (Samsung NAND 256MiB 3,3V 8-bit)
NAND device: 256MiB, SLC, page size: 2048, OOB size: 64
brcmnand brcmnand.0: 256MiB total, 128KiB blocks, 2KiB pages, 16B OOB, 8-bit, Hamming ECC
Bad block table found at page 131008, version 0x01
Bad block table found at page 130944, version 0x01
nand_read_bbt: bad block at 0x0000067e0000
nand_read_bbt: bad block at 0x00000c440000
nand_read_bbt: bad block at 0x00000f7c0000
Creating 4 MTD partitions on "brcmnand.0":
0x000001f00000-0x000010000000 : "rootfs"
0x000001f00000-0x000010000000 : "rootfs(redundant)"
0x000000200000-0x000000900000 : "kernel"
0x000000900000-0x000000a00000 : "mac"
UBI: attaching mtd0 to ubi0
random: nonblocking pool is initialized
UBI: scanning is finished
UBI: attached mtd0 (name "rootfs", size 225 MiB) to ubi0
UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
UBI: good PEBs: 1793, bad PEBs: 7, corrupted PEBs: 0
UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
UBI: max/mean erase counter: 27/10, WL threshold: 4096, image sequence number: 760564251
UBI: available PEBs: 0, total reserved PEBs: 1793, PEBs reserved for bad PEB handling: 33
UBI: background thread "ubi_bgt0d" started, PID 53
ALSA device list:
No soundcards found.
UBIFS: parse sync
UBIFS: background thread "ubifs_bgt0_0" started, PID 56
UBIFS: mounted UBI device 0, volume 0, name "rootfs"
UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS: FS size: 221573120 bytes (211 MiB, 1745 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
UBIFS: reserved for root: 0 bytes (0 KiB)
UBIFS: media format: w4/r0 (latest is w4/r0), UUID 7C7FB65B-0240-40DC-9FD0-B1B25984D821, small LPT model
VFS: Mounted root (ubifs filesystem) on device 0:12.
devtmpfs: mounted
Freeing unused kernel memory: 192K (80760000 - 80790000)
udevd[101]: starting version 182
UBI error: ubi_open_volume: cannot open device 0, volume 0, error -16
WARNING: You are using an experimental version of the media stack.
As the driver is backported to an older kernel, it doesn't offer
enough quality for its usage in production.
Use it with care.
Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
b72c2640f72c92d3f8dac9b3c6e5fa4fe0b73dcc tryfix em28xx
3e6e48d66efaf3478472914018dd2109e8ee7d00 tryfix em28xx
650494dfa1ab1afeec0216a7bc76b16130f098cd tryfix em28xx
WARNING: You are using an experimental version of the media stack.
As the driver is backported to an older kernel, it doesn't offer
enough quality for its usage in production.
Use it with care.
Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
b72c2640f72c92d3f8dac9b3c6e5fa4fe0b73dcc tryfix em28xx
3e6e48d66efaf3478472914018dd2109e8ee7d00 tryfix em28xx
650494dfa1ab1afeec0216a7bc76b16130f098cd tryfix em28xx
usb 2-1: dvb_usb_af9035: prechip_version=83 chip_version=02 chip_type=9135
usb 2-1: bh_dvb_usb_v2: found a 'Avermedia A835B(1835)' in cold state
usb 2-1: bh_dvb_usb_v2: downloading firmware from file 'dvb-usb-it9135-02.fw'
usb 2-1: dvb_usb_af9035: firmware version=3.39.1.0
usb 2-1: bh_dvb_usb_v2: found a 'Avermedia A835B(1835)' in warm state
usb 2-1: dvb_usb_af9035: [0] overriding tuner from 38 to 60
usb 2-1: bh_dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
DVB: registering new adapter (Avermedia A835B(1835))
i2c i2c-0: af9033: firmware version: LINK=0.0.0.0 OFDM=3.9.1.0
usb 2-1: DVB: registering adapter 1 frontend 0 (Afatech AF9033 (DVB-T))...
usbcore: registered new interface driver dvb_usb_af9035
procmk_init
bcm_event: module license 'Proprietary' taints kernel.
Disabling lock debugging due to kernel taint
DVB: registering new adapter (_vuplus_solo2_)
bcm7356: hotplug_callback():
Hotplug - status.connected 1:0:0
bcm7356: hotplug_callback():
Hotplug - connecting HDMI to display 0xe
[GP]:brcm_pwm_init
bcm7356: hotplug_callback():
Hotplug - status.connected 1:1:2
brcm_demux_init: $Id: bcm_demux.c,v 0.7 $
[MPVR]: >> misc_pvr_init
[VID]: 6bcm7335_video_init
[AUD]: 6bcm7335_audio_init
BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (BCM7346 FE)...
BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (BCM7346 FE)...
BKNI_P_GetTrackAllocEntry_resize: resizing from 5376->8704
BKNI_Malloc(linuxkernel) top users:
blocks, bytes, filename:line
1024, 176128, portinginterface/hsm/src/common/bhsm.c:500
601, 132308, BSEAV/lib/utils/balloc.c:31
387, 24768, magnum/commonutils/mrc/src/bmrc_monitor.c:666
input: dreambox advanced remote control (native) as /devices/virtual/input/input0
[LCD]: registered
0:0
[CI]: registered ci0
[CI]: CI interface initialised
[DFP]: registered dbox fp
[DFP]: Scart 9597 is found 4
[SC]: registered sci0
[SC]: registered sci1
system_time_set wakeup mode get
system_time_set wakeup mode get 0xc4
[VID]: VIDEO_SET_STREAMTYPE 0
[VID]: VIDEO_SELECT_SOURCE 1 0
[VID]: VIDEO_PLAY 1 2 0
[VID]: VIDEO_CONTINUE 1 1
[VID]: VIDEO_CLEAR_BUFFER 1 1 0
[VID]: VIDEO_STOP 0 1
[VID]: VIDEO_SELECT_SOURCE 0 0
__clk_enable: network [1]
__clk_enable: enet [1]
bcm40nm_pm_genet_enable 00
bcmgenet bcmgenet.0 eth0: link up, 1000 Mbps, full duplex
NET: Registered protocol family 10
[VID]: VIDEO_SET_STREAMTYPE 0
[VID]: VIDEO_SELECT_SOURCE 1 0
[VID]: VIDEO_PLAY 1 2 0
[VID]: VIDEO_CONTINUE 1 1
[VID]: VIDEO_CLEAR_BUFFER 1 1 0
[VID]: VIDEO_STOP 0 1
[VID]: VIDEO_SELECT_SOURCE 0 0
[LCD]: unknown cmd 0x1015
UBI error: ubi_open_volume: cannot open device 0, volume 0, error -16
[AUD]: AUDIO_SET_MUTE 0
[AUD]: AUDIO_SET_MIXER -867148304
[AUD]: AUDIO_SET_MIXER : amixl 0, amixr 0
[AUD]: AUDIO_SET_MIXER : next left volume 0, right volume 0
[AUD]: AUDIO_SET_MIXER : next left volume -70, right volume -70
[AUD]: AUDIO_SET_MIXER -867148304
[AUD]: AUDIO_SET_MIXER : amixl 0, amixr 0
[AUD]: AUDIO_SET_MIXER : next left volume -70, right volume -70
[AUD]: AUDIO_SET_MIXER : next left volume -70, right volume -70
root@vusolo2:~#
Broot@vusolo2:~# BlackHole 3.0.8 vusolo2
t-ahci.0: -sh: BlackHole: command not found
can'troot@vusolo2:~#
root@vusolo2:~# vusolo2 login: root
g-sh: vusolo2: command not found
root@vusolo2:~# root@vusolo2:~# dmesg
et-sh: root@vusolo2:~#: command not found
root@vusolo2:~# console [ttyS0] enabled
lo-sh: console: command not found
ck
root@vusolo2:~# bootconsole [early0] disabled
clk-sh: bootconsole: command not found
root@vusolo2:~# serial8250.0: ttyS1 at MMIO 0x10406940 (irq = 66, base_baud = 5062500) is a 16550A
-sh: syntax error near unexpected token `('
broot@vusolo2:~# serial8250.0: ttyS2 at MMIO 0x10406980 (irq = 67, base_baud = 5062500) is a 16550A
-sh: syntax error near unexpected token `('
_root@vusolo2:~# loop: module loaded
-sh: loop:: command not found
root@vusolo2:~# ahci strict-ahci.0: can't get clock
> __clk_enable: sata [1]
> bcm40nm_pm_sata_enable 00
h> ahci strict-ahci.0: SSS flag set, parallel bus scan disabled
> ahci strict-ahci.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl platform mode
> ahci strict-ahci.0: flags: ncq sntf stag clo slum part
> scsi0 : ahci_platform
> scsi1 : ahci_platform
a> ata1: SATA max UDMA/133 mmio [mem 0x10181000-0x10190fff] port 0x100 irq 41
> ata2: SATA max UDMA/133 mmio [mem 0x10181000-0x10190fff] port 0x180 irq 41
b> brcmstb_nand: NAND controller driver is loaded
> __clk_enable: network [1]
_> __clk_enable: enet [1]
> bcm40nm_pm_genet_enable 00
> Found PHY at Address 3
> bcmgenet: configuring instance #0 for external RGMII
> __clk_disable: enet [0]
> bcm40nm_pm_genet_disable 00
> __clk_disable: network [0]
> ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
a> ata1: SATA link down (SStatus 0 SControl 300)
> __clk_enable: usb [1]
> bcm40nm_pm_usb_enable 00
eh> ehci-brcm ehci-brcm.0: Broadcom STB EHCI
> ehci-brcm ehci-brcm.0: new USB bus registered, assigned bus number 1
> ehci-brcm ehci-brcm.0: irq 69, io mem 0x10480300
> ehci-brcm ehci-brcm.0: USB 0.0 started, EHCI 1.00
h> hub 1-0:1.0: USB hub found
> hub 1-0:1.0: 1 port detected
r> ehci-brcm ehci-brcm.1: Broadcom STB EHCI
> ehci-brcm ehci-brcm.1: new USB bus registered, assigned bus number 2
> ehci-brcm ehci-brcm.1: irq 70, io mem 0x10480500
> ehci-brcm ehci-brcm.1: USB 0.0 started, EHCI 1.00
> hub 2-0:1.0: USB hub found
u> hub 2-0:1.0: 1 port detected
> ehci-brcm ehci-brcm.2: Broadcom STB EHCI
> ehci-brcm ehci-brcm.2: new USB bus registered, assigned bus number 3
> ehci-brcm ehci-brcm.2: irq 74, io mem 0x10490300
e> ehci-brcm ehci-brcm.2: USB 0.0 started, EHCI 1.00
> hub 3-0:1.0: USB hub found
> hub 3-0:1.0: 1 port detected
> ehci-brcm ehci-brcm.3: Broadcom STB EHCI
e> ehci-brcm ehci-brcm.3: new USB bus registered, assigned bus number 4
e> ehci-brcm ehci-brcm.3: irq 75, io mem 0x10490500
> ehci-brcm ehci-brcm.3: USB 0.0 started, EHCI 1.00
> hub 4-0:1.0: USB hub found
h> hub 4-0:1.0: 1 port detected
> ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
> ohci-brcm ohci-brcm.0: Broadcom STB OHCI
> ohci-brcm ohci-brcm.0: new USB bus registered, assigned bus number 5
> ohci-brcm ohci-brcm.0: irq 71, io mem 0x10480400
> hub 5-0:1.0: USB hub found
> hub 5-0:1.0: 1 port detected
> ohci-brcm ohci-brcm.1: Broadcom STB OHCI
> ohci-brcm ohci-brcm.1: new USB bus registered, assigned bus number 6
hc> ohci-brcm ohci-brcm.1: irq 72, io mem 0x10480600
a> ata2: SATA link down (SStatus 0 SControl 300)
h> hub 6-0:1.0: USB hub found
h> hub 6-0:1.0: 1 port detected
o> ohci-brcm ohci-brcm.2: Broadcom STB OHCI
oh> ohci-brcm ohci-brcm.2: new USB bus registered, assigned bus number 7
o> ohci-brcm ohci-brcm.2: irq 76, io mem 0x10490400
u> usb 2-1: new high-speed USB device number 2 using ehci-brcm
h> hub 7-0:1.0: USB hub found
> hub 7-0:1.0: 1 port detected
> ohci-brcm ohci-brcm.3: Broadcom STB OHCI
> ohci-brcm ohci-brcm.3: new USB bus registered, assigned bus number 8
m> ohci-brcm ohci-brcm.3: irq 77, io mem 0x10490600
> hub 8-0:1.0: USB hub found
> hub 8-0:1.0: 1 port detected
u> usbcore: registered new interface driver usb-storage
mo> mousedev: PS/2 mouse device common for all mice
> i2c /dev entries driver
> Success! Registering the characther device success with 0
> blackhole initialised
> sdhci: Secure Digital Host Controller Interface driver
> sdhci: Copyright(c) Pierre Ossman
s> sdhci-pltfm: SDHCI platform and OF driver helper
id> hidraw: raw HID events driver (C) Jiri Kosina
> usbcore: registered new interface driver usbhid
> usbhid: USB HID core driver
T> TCP: cubic registered
> NET: Registered protocol family 17
> Key type dns_resolver registered
P> PM: CP0 COUNT/COMPARE frequency does not depend on divisor
> EBI CS0: setting up NAND flash (primary)
N> NAND device: Manufacturer ID: 0xec, Chip ID: 0xda (Samsung NAND 256MiB 3,3V 8-bit)
> NAND device: 256MiB, SLC, page size: 2048, OOB size: 64
> brcmnand brcmnand.0: 256MiB total, 128KiB blocks, 2KiB pages, 16B OOB, 8-bit, Hamming ECC
B> Bad block table found at page 131008, version 0x01
B> Bad block table found at page 130944, version 0x01
> nand_read_bbt: bad block at 0x0000067e0000
> nand_read_bbt: bad block at 0x00000c440000
> nand_read_bbt: bad block at 0x00000f7c0000
> Creating 4 MTD partitions on "brcmnand.0":
0> 0x000001f00000-0x000010000000 : "rootfs"
0> 0x000001f00000-0x000010000000 : "rootfs(redundant)"
> 0x000000200000-0x000000900000 : "kernel"
0> 0x000000900000-0x000000a00000 : "mac"
> UBI: attaching mtd0 to ubi0
> random: nonblocking pool is initialized
U> UBI: scanning is finished
> UBI: attached mtd0 (name "rootfs", size 225 MiB) to ubi0
UB> UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
> UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
: VI> UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
> UBI: good PEBs: 1793, bad PEBs: 7, corrupted PEBs: 0
> UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
> UBI: max/mean erase counter: 27/10, WL threshold: 4096, image sequence number: 760564251
B> UBI: available PEBs: 0, total reserved PEBs: 1793, PEBs reserved for bad PEB handling: 33
U> UBI: background thread "ubi_bgt0d" started, PID 53
> ALSA device list:
> No soundcards found.
> UBIFS: parse sync
> UBIFS: background thread "ubifs_bgt0_0" started, PID 56
> UBIFS: mounted UBI device 0, volume 0, name "rootfs"
> UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
> UBIFS: FS size: 221573120 bytes (211 MiB, 1745 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
> UBIFS: reserved for root: 0 bytes (0 KiB)
> UBIFS: media format: w4/r0 (latest is w4/r0), UUID 7C7FB65B-0240-40DC-9FD0-B1B25984D821, small LPT model
> VFS: Mounted root (ubifs filesystem) on device 0:12.
d> devtmpfs: mounted
> Freeing unused kernel memory: 192K (80760000 - 80790000)
u> udevd[101]: starting version 182
e> UBI error: ubi_open_volume: cannot open device 0, volume 0, error -16
> WARNING: You are using an experimental version of the media stack.
> As the driver is backported to an older kernel, it doesn't offer
enough -sh: ahci: command not found
qualiroot@vusolo2:~# enough quality for its usage in production.
U-sh: enough: command not found
seroot@vusolo2:~# Use it with care.
Lat-sh: Use: command not found
est root@vusolo2:~# Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
-sh: syntax error near unexpected token `('
root@vusolo2:~# b72c2640f72c92d3f8dac9b3c6e5fa4fe0b73dcc tryfix em28xx
-sh: b72c2640f72c92d3f8dac9b3c6e5fa4fe0b73dcc: command not found
root@vusolo2:~# 3e6e48d66efaf3478472914018dd2109e8ee7d00 tryfix em28xx
-sh: 3e6e48d66efaf3478472914018dd2109e8ee7d00: command not found
root@vusolo2:~# 650494dfa1ab1afeec0216a7bc76b16130f098cd tryfix em28xx
WAR-sh: 650494dfa1ab1afeec0216a7bc76b16130f098cd: command not found
root@vusolo2:~# WARNING: You are using an experimental version of the media stack.
-sh: WARNING:: command not found
root@vusolo2:~# As the driver is backported to an older kernel, it doesn't offer
> enough quality for its usage in production.
> Use it with care.
> Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
> b72c2640f72c92d3f8dac9b3c6e5fa4fe0b73dcc tryfix em28xx
> 3e6e48d66efaf3478472914018dd2109e8ee7d00 tryfix em28xx
> 650494dfa1ab1afeec0216a7bc76b16130f098cd tryfix em28xx
s> usb 2-1: dvb_usb_af9035: prechip_version=83 chip_version=02 chip_type=9135
> usb 2-1: bh_dvb_usb_v2: found a 'Avermedia A835B(1835)' in cold state
b-sh: syntax error near unexpected token `('
root@vusolo2:~# usb 2-1: bh_dvb_usb_v2: downloading firmware from file 'dvb-usb-it9135-02.fw'
sb -sh: usb: command not found
2-1: dvbroot@vusolo2:~# usb 2-1: dvb_usb_af9035: firmware version=3.39.1.0
usb -sh: usb: command not found
2-1: bhroot@vusolo2:~# usb 2-1: bh_dvb_usb_v2: found a 'Avermedia A835B(1835)' in warm state
us-sh: usb: command not found
b root@vusolo2:~# usb 2-1: dvb_usb_af9035: [0] overriding tuner from 38 to 60
sb 2-1: bh_-sh: usb: command not found
dvb_uroot@vusolo2:~# usb 2-1: bh_dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
DVB:-sh: usb: command not found
reroot@vusolo2:~# DVB: registering new adapter (Avermedia A835B(1835))
-sh: syntax error near unexpected token `('
root@vusolo2:~# i2c i2c-0: af9033: firmware version: LINK=0.0.0.0 OFDM=3.9.1.0
usb 2-sh: i2c: command not found
-1root@vusolo2:~# usb 2-1: DVB: registering adapter 1 frontend 0 (Afatech AF9033 (DVB-T))...
-sh: syntax error near unexpected token `('
root@vusolo2:~# usbcore: registered new interface driver dvb_usb_af9035
procm-sh: usbcore:: command not found
root@vusolo2:~# procmk_init
b-sh: procmk_init: command not found
cm_everoot@vusolo2:~# bcm_event: module license 'Proprietary' taints kernel.
sabling-sh: bcm_event:: command not found
lroot@vusolo2:~# Disabling lock debugging due to kernel taint
DVB: regi-sh: Disabling: command not found
steroot@vusolo2:~# DVB: registering new adapter (_vuplus_solo2_)
-sh: syntax error near unexpected token `('
broot@vusolo2:~# bcm7356: hotplug_callback():
-sh: syntax error near unexpected token `('
root@vusolo2:~# Hotplug - status.connected 1:0:0
bcm7356-sh: Hotplug: command not found
:root@vusolo2:~# bcm7356: hotplug_callback():
-sh: syntax error near unexpected token `('
root@vusolo2:~# Hotplug - connecting HDMI to display 0xe
[G-sh: Hotplug: command not found
root@vusolo2:~# [GP]:brcm_pwm_init
bc-sh: [GP]:brcm_pwm_init: command not found
root@vusolo2:~#
m73root@vusolo2:~# bcm7356: hotplug_callback():
-sh: syntax error near unexpected token `('
root@vusolo2:~# Hotplug - status.connected 1:1:2
-sh: Hotplug: command not found
root@vusolo2:~# brcm_demux_init: $Id: bcm_demux.c,v 0.7 $
[M-sh: brcm_demux_init:: command not found
PVroot@vusolo2:~# [MPVR]: >> misc_pvr_init
VID]: ^A-sh: [MPVR]:: command not found
6bcroot@vusolo2:~# 6bcm7335_video_init
[-sh: 6bcm7335_video_init[VID]:: command not found
root@vusolo2:~# 6bcm7335_audio_init
B-sh: 6bcm7335_audio_init[AUD]:: command not found
RCroot@vusolo2:~# BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (BCM7346 FE)...
-sh: syntax error near unexpected token `('
root@vusolo2:~# BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (BCM7346 FE)...
-sh: syntax error near unexpected token `('
root@vusolo2:~# BKNI_P_GetTrackAllocEntry_resize: resizing from 5376->8704
BKNI-sh: BKNI_P_GetTrackAllocEntry_resize:: command not found
_Mroot@vusolo2:~# BKNI_Malloc(linuxkernel) top users:
-sh: syntax error near unexpected token `linuxkernel'
root@vusolo2:~# blocks, bytes, filename:line
-sh: blocks,: command not found
root@vusolo2:~# 1024, 176128, portinginterface/hsm/src/common/bhsm.c:500
-sh: 1024,: command not found
root@vusolo2:~# 601, 132308, BSEAV/lib/utils/balloc.c:31
387-sh: 601,: command not found
,root@vusolo2:~# 387, 24768, magnum/commonutils/mrc/src/bmrc_monitor.c:666
in-sh: 387,: command not found
root@vusolo2:~# input: dreambox advanced remote control (native) as /devices/virtual/input/input0
-sh: syntax error near unexpected token `('
root@vusolo2:~# [LCD]: registered
CI]:-sh: [LCD]:: command not found
root@vusolo2:~# 0:0
regist-sh: 0:0: command not found
root@vusolo2:~# [CI]: registered ci0
[C-sh: [CI]:: command not found
root@vusolo2:~# [CI]: CI interface initialised
[DFP-sh: [CI]:: command not found
root@vusolo2:~#
root@vusolo2:~# [DFP]: registered dbox fp
[D-sh: [DFP]:: command not found
root@vusolo2:~# [DFP]: Scart 9597 is found 4
-sh: [DFP]:: command not found
root@vusolo2:~#
root@vusolo2:~# [SC]: registered sci0
[S-sh: [SC]:: command not found
root@vusolo2:~# [SC]: registered sci1
s-sh: [SC]:: command not found
ystem_time_sroot@vusolo2:~# system_time_set wakeup mode get
yste-sh: system_time_set: command not found
root@vusolo2:~# system_time_set wakeup mode get 0xc4
[-sh: system_time_set: command not found
root@vusolo2:~# [VID]: VIDEO_SET_STREAMTYPE 0
[V-sh: [VID]:: command not found
ID]:root@vusolo2:~# [VID]: VIDEO_SELECT_SOURCE 1 0
[V-sh: [VID]:: command not found
IDroot@vusolo2:~# [VID]: VIDEO_PLAY 1 2 0
[VI-sh: [VID]:: command not found
D]root@vusolo2:~# [VID]: VIDEO_CONTINUE 1 1
[V-sh: [VID]:: command not found
ID]: root@vusolo2:~# [VID]: VIDEO_CLEAR_BUFFER 1 1 0
[VI-sh: [VID]:: command not found
root@vusolo2:~# [VID]: VIDEO_STOP 0 1
[-sh: [VID]:: command not found
VIDroot@vusolo2:~# [VID]: VIDEO_SELECT_SOURCE 0 0
__-sh: [VID]:: command not found
clkroot@vusolo2:~# __clk_enable: network [1]
__c-sh: __clk_enable:: command not found
lk_eroot@vusolo2:~# __clk_enable: enet [1]
bcm40-sh: __clk_enable:: command not found
nm_proot@vusolo2:~# bcm40nm_pm_genet_enable 00
bcmgen-sh: bcm40nm_pm_genet_enable: command not found
et broot@vusolo2:~# bcmgenet bcmgenet.0 eth0: link up, 1000 Mbps, full duplex
NE-sh: bcmgenet: command not found
T:root@vusolo2:~# NET: Registered protocol family 10
[V-sh: NET:: command not found
IDroot@vusolo2:~# [VID]: VIDEO_SET_STREAMTYPE 0
ID-sh: [VID]:: command not found
root@vusolo2:~# [VID]: VIDEO_SELECT_SOURCE 1 0
[-sh: [VID]:: command not found
root@vusolo2:~# [VID]: VIDEO_PLAY 1 2 0
[V-sh: [VID]:: command not found
ID]root@vusolo2:~# [VID]: VIDEO_CONTINUE 1 1
]: VI-sh: [VID]:: command not found
DEO_CLroot@vusolo2:~# [VID]: VIDEO_CLEAR_BUFFER 1 1 0
[-sh: [VID]:: command not found
root@vusolo2:~# [VID]: VIDEO_STOP 0 1
[VI-sh: [VID]:: command not found
D]root@vusolo2:~# [VID]: VIDEO_SELECT_SOURCE 0 0
[LC-sh: [VID]:: command not found
D]:root@vusolo2:~# [LCD]: unknown cmd 0x1015
UB-sh: [LCD]:: command not found
I root@vusolo2:~# UBI error: ubi_open_volume: cannot open device 0, volume 0, error -16
[A-sh: UBI: command not found
root@vusolo2:~# [AUD]: AUDIO_SET_MUTE 0
[-sh: [AUD]:: command not found
AUDroot@vusolo2:~# [AUD]: AUDIO_SET_MIXER -867148304
[-sh: [AUD]:: command not found
AUD]root@vusolo2:~# [AUD]: AUDIO_SET_MIXER : amixl 0, amixr 0
[A-sh: [AUD]:: command not found
UDroot@vusolo2:~# [AUD]: AUDIO_SET_MIXER : next left volume 0, right volume 0
[AUD]-sh: [AUD]:: command not found
: Aroot@vusolo2:~# [AUD]: AUDIO_SET_MIXER : next left volume -70, right volume -70
[AU-sh: [AUD]:: command not found
D]root@vusolo2:~# [AUD]: AUDIO_SET_MIXER -867148304
UD-sh: [AUD]:: command not found
]:root@vusolo2:~# [AUD]: AUDIO_SET_MIXER : amixl 0, amixr 0
[A-sh: [AUD]:: command not found
Uroot@vusolo2:~# [AUD]: AUDIO_SET_MIXER : next left volume -70, right volume -70
[-sh: [AUD]:: command not found
AUroot@vusolo2:~# [AUD]: AUDIO_SET_MIXER : next left volume -70, right volume -70
roo-sh: [AUD]:: command not found
t@vroot@vusolo2:~# root@vusolo2:~#