Black Hole Vu+ Ultimo v.2.0.6

TUT

TUT

Vu+ Newbie
Thanks Mito but still doesn't work, my Sky HD box switch to the correct AV channel when turned on, my DVD recorder also, I am not sure why the Ultimo doesn't ?
 
U

unicat63

Vu+ Newbie
It is a successful and high-quality image,but need to know what to install on it, you risk of blockages.
Success of those who have worked for them.
 
gobi2000

gobi2000

Vu+ User
What is error ? Dont start my vu ultimo

Logo out serial:

Code: 
Configuring network interfaces... nmbd: error while loading shared libraries: /lib/librt.so.1: ELF file data encoding not little-endian
smbd: error while loading shared libraries: /lib/librt.so.1: ELF file data encoding not little-endian
run-parts: /etc/network/if-up.d/01samba-start exited with code 127
bcmemac: eth0 NIC Link is Down
nmbd: error while loading shared libraries: /lib/librt.so.1: ELF file data encoding not little-endian
smbd: error while loading shared libraries: /lib/librt.so.1: ELF file data encoding not little-endian
run-parts: /etc/network/if-up.d/01samba-start exited with code 127
Starting portmap daemon...
net.ipv4.conf.default.rp_filter = 1
net.ipv4.conf.all.rp_filter = 1
crond[526]: crond: crond (busybox 1.19.4) started, log level 8
/bin/pp: line 1: syntax error: unexpected "("
/etc/rcS.d/S97service: line 3: /bin/mii: not found
/bin/pp: line 1: syntax error: unexpected "("
/etc/rcS.d/S97service: line 6: /bin/mii: not found
INIT: Entering runlevel: 3
dbus-uuidgen: error while loading shared libraries: /lib/librt.so.1: ELF file data encoding not little-endian
 
angelofsky1980

angelofsky1980

BlackHole Driver Specialist
gobi2000 said:
What is error ? Dont start my vu ultimo

Logo out serial:

Code: 
Configuring network interfaces... nmbd: error while loading shared libraries: /lib/librt.so.1: ELF file data encoding not little-endian
smbd: error while loading shared libraries: /lib/librt.so.1: ELF file data encoding not little-endian
run-parts: /etc/network/if-up.d/01samba-start exited with code 127
bcmemac: eth0 NIC Link is Down
nmbd: error while loading shared libraries: /lib/librt.so.1: ELF file data encoding not little-endian
smbd: error while loading shared libraries: /lib/librt.so.1: ELF file data encoding not little-endian
run-parts: /etc/network/if-up.d/01samba-start exited with code 127
Starting portmap daemon...
net.ipv4.conf.default.rp_filter = 1
net.ipv4.conf.all.rp_filter = 1
crond[526]: crond: crond (busybox 1.19.4) started, log level 8
/bin/pp: line 1: syntax error: unexpected "("
/etc/rcS.d/S97service: line 3: /bin/mii: not found
/bin/pp: line 1: syntax error: unexpected "("
/etc/rcS.d/S97service: line 6: /bin/mii: not found
INIT: Entering runlevel: 3
dbus-uuidgen: error while loading shared libraries: /lib/librt.so.1: ELF file data encoding not little-endian
Click to expand...

Seems you have installed something not compatible with Vu+ architecture (MIPSel).
I suggest to reflash your box.
 
R

rojillo1

BH Lover
When I use PIP on an HD channel, I always see the channel stops, this does not happen with SD channel, Is it a problem of the decoder and therefore has no solution?.

Thanks.
 
gobi2000

gobi2000

Vu+ User
It is the second time that both error happens after stendby confort first appeared with 2.05 and now with 2.06, yes I put new 2.07 image but do not know the cause of this error
 
R

rojillo1

BH Lover
Have I found that when I change the channel, it occurs randomly, audio is heard wrong, the only solution is to change the channel again, is known this problem?.

Best regards.
 
You must log in or register to reply here.
Top