newgolfer
Vu+ User+++
en el mio Que hace dos meses Que lo tengo en El Arranque no Aparece el CFE V2 mi pregunta es lo tengo que instalar en mi Vu duo2
gracias
Yes.
Look at TRD #1
en el mio Que hace dos meses Que lo tengo en El Arranque no Aparece el CFE V2 mi pregunta es lo tengo que instalar en mi Vu duo2
gracias
Duo and Duo2 are DIFFERENT BOXES. DO NOT MIX CFE SO YOU BRICK YOUR BOX. PAY ATTENTION!HI, Just bought a VU+Duo. Do I need to upload the file posted by Shiro in 2013 before I try to upload Black Hole flash? thanks, S
Hi there... need som help, please!
After installing a few plugins, DUO2 restarts again and again. No way to upgrade or restore to factory settings. I have followed the directions I found on the VU+ website (downloaded the rigth version of software from code.vuplus.com, used an FAT32 USB dirve, etc) but the STB seams not to find anything in the usb port (nor the front one or the back ones), so keeps restarting again and again.
Any idea on how to overpass this situation?
And please, excuse my poor english!...
Hi there... need som help, please!
After installing a few plugins, DUO2 restarts again and again. No way to upgrade or restore to factory settings. I have followed the directions I found on the VU+ website (downloaded the rigth version of software from code.vuplus.com, used an FAT32 USB dirve, etc) but the STB seams not to find anything in the usb port (nor the front one or the back ones), so keeps restarting again and again.
Any idea on how to overpass this situation?
And please, excuse my poor english!...
Thank you for your answers but it makes no difference holding down the front power button while booting...
Is it there any other procedure to get my STB back to work?... perhaps a way to access the system trough the LAN connection and may be erasing the plugin's I tried to install to get the STB back to it's previous state?... any other idea?
@nunigaia: I'm sorry and I do apologize if I did something wrong due to my lack of experience around here, but what do you mean with "wait for answers and don't spamm through the forum"?... I just posted my question and didn't get back to the thread until had an answer. The only other thing I did was posting the same question in Spanish in the Spanish support thread which existence I realized just afterwords... is that second post what you mean "spamming"?... should I have posted my question in a different thread instead of this one?
Thank you again in advance for your answers!
Just try different brand USB sticks, usually the smaller ones do the trick.
Many have had similar problems and often find there old USB sticks, or cheaper ones, work where their newer ones failed.
I've tried 5 different USB sticks (from 64GB to 4GB) from different brands... 3 of them are just 4GB (two are cheap merchandising stuff)... most of them originally FT32 formatted (the rest I did with Macrorit Disk Partition Expert Free tool since my PC has Windows 10 installed and it just formats exFAT whic I'm not sure works). I'll do my best to find any other USB sticks around, but I'm afraid it's all I have...
Thank you so much! Now I was able to install the Blackhole image and the STB is working fine!... Thank you very much again for your help!
Sorry still need install this bootloader? While avende the 3. 2?This update is needed to use the plugin "Wake on Lan" that will be available in the next Black Hole 2.0.5 version for Duo2.
Instructions:
1. Unzip the Duo2_CFE_V2.zip to USB stick.(cfe_cfe_auto.bin, cfe_cfe_auto.md5sum and cfe_cfe_auto.model should be at /vuplus/duo2 folder)
2. Insert USB stick into the USB port of Duo2 and turn the power on.
3. Press the front power button when Update message is shown.
5. It takes just a few seconds to update.
5. If Duo2 displays the message "Finished..reboot", remove the USB stick and restart the box.
5. To update image later, you should delete the all cfe_cfe_auto.* at /vuplus/duo2 in USB stick once CFE update is finished.
File:
http://archive.vuplus.com/download/cfe/duo2/v2/Duo2_CFE_V2.zip