Hi have spent some time looking through all the different menu’s it is Blackhole but shows a date in 2015!! Can I update this there are enigma2 plugins that will update if can update how do I do this I have managed to get Astra 28degs onto the two tuners but so far on a scan they are not finding anything!! I must have a setting wrong?Are you going into Menu, Setup, and look for Tuners & scanning, or Tuners, or Tuner Setup.
Once you get to Tuner Setup you should have both Tuners listed, Tuner A, Simple, Single, Hotbird 13E, and Tuner B, Simple, Single, Astra 1 19.2E KU band.
Select Tuner B, scroll down to Satellite, and press the right arrow key to select a satellite, it should get you to Astra 2, 28.2E. Save this then try scanning in channels.
If you can't locate Astra 2, 28.2E, your satellites.xml file might have been modified, by the previous owner, to only have the two satellites he wanted, 13E and 19.2E.
Hi my dish is aligned correctly as I receive Freesat here in Spain at the moment I am using a splitter so it could be that causing a problem I will try connecting directly to the dish.I notice on Satfinder the little box has a Red Cross should this be green tick if so how do I change it. and could this be the problem I have connected both Lnb connectors what are the settings in need to complete the setup? I have spent many hours on the box and your Forum and it’s gradually “sinking “in but know dour I will have further questions thank you for putting up with me ,I was greatly encouraged when one of you colleagues was rebuking someone ,saying his own father is 86 years old and he has “got his head round it”Thank againAre you sure that your dish is pointing at Astra 2, 28.2E?
If your dish is a new sky dish it might have a Sky Q LNB, which isn't compatible, with the Solo 2.
You might want to try manually scanning in a few channels:
Code:https://www.lyngsat.com/Astra-2E-2F-2G.html
Thank you for quick reply not back to my apartment until tomorrow,will respond then !!Which menu are you in, when you see the red cross?
Are you in the signal finder menu?
Providing the transponder, and satellite, information, are correct, you should have a green display, the red cross doesn't sound good.
Any chance of posting pictures, of the menu screens?
You can connect to your receiver, from your PC, providing you have it connected to your router. All you need is to find your receivers IP address, in the network menu, and type this into a PC web browser, like firefox, google, or even explorer, and you should then get OpenWebif, which allows you to control your receiver, from your PC, and grab screen shots, of your receiver. I use the PrtScn button, on my PC keyboard, and then paste the image into a paint program.
Success latest Blackhole flashed box back up and working presume it’s not a clone? Now need to sort out Ariel leads thank youWill try that and check whether clone!!