Ev0
Admin
I am unable to check as I have already activated and deactivated it on my box.
I am unable to check as I have already activated and deactivated it on my box.
You could try pressing menu and then load default config, but other than this I really don't know, I am no expert with lcd4linux, I just know after playing about with the settings it does work (but I have disabled it on my box as I don't need it).Have done following :
1. Installed LCD4linux from BH server
2. Transfered Evo's config , each in respective folders
3. Generated picon forder in media/usb and transfered my 220x132 picons there
4. Have enabled "LCD4linux " on in the settings .
4. Rebooted the reciver , picons appear on TV skin infobar , but not on the LCD display
What am I missing ... ?
Have attached screen from LCD4linux setting
Hi What's the path background folder? In etc/enigma2 ?My config for lcd4linux Solo 4K. Zip file contains also some backgrounds.
Hi there. Have mixed some of the files from the previous posts (thanks lads) - it works like a charm. But... there is one thing that bothers me - backlight of the LCD at night. It's so bright that I don't need a torch Is there any way to turn it off? I saw some options in LCD4Linux settings but wasn't able to get them to work.
That was so... obvious thanks Xrobertas, now I've got everything set up the way I wantedGo to: Main menu / Setting / System / Display setting
I set L4L under BH 3.0.2 installed in Openmultiboot (in flash there is OBH 0.6) and I see every sections correctly set up either by OpenWebIf or by L4L plugin (and I see the results as I want on both of them), but there is no way to switch on the LCD on Solo4K.
I suspect it depends on the fact BH it is installed in multiboot and some paths are not correctly redirected by OMB itself.
Obviously, the three parameters to switch on the 3 sections are ON and I also tried the procedure of switching them ON/OFF more times and then reboot.
What am I doing wrong?