LNB's connection

Nor50 said:
Thanks to Thomas67 I now hope everything is OK. I have flashed a new image and that hopefully deleted all errors from previous set-ups.
Click to expand...

The problem at tuner A ( see the screen shot ) is that you have setted the tuner cumulatively to ( 19,2 East, 0,9 W and 0,9W ). Even if you have an Unicable LNB, you can´t set severall postions ( LNB1 ) without a Diseqc device.

A diseqc device can use severall LNB´s ...

upload_2019-11-6_18-35-49.png


Now you have it running, if you have turned off at tuner A settings the positions not needed, all it was ok.

best regards
nunigaia
 
Exactly. As I wrote, he hadn't set the DiseqC. So it couldn't work.
And, @Nor50 , it was not necessary to reflash if you had followed the advices you got. The day you'll learn how to configure your tuners, this will be clear even to you.
 
Nor50 said:
Thanks to Thomas67 I now hope everything is OK. I have flashed a new image and that hopefully deleted all errors from previous set-ups.
Click to expand...

No problem and accully you fixed your self ;) You just needed to have some one to talk to in a proper language and figure out the Tuner settings ;) :)

Anyway all is good and thanks to all other who chipped in with helpfull advise
Special since this was about another image then ours :)
 
Picture still freezing on TV2 Livstil. Not tried much more yet. Been busy tonight. NRK 1 was also freezing a lot. Will try that channel tomorrow.
 
Alexwilmac said:
Exactly. As I wrote, he hadn't set the DiseqC. So it couldn't work.
And, @Nor50 , it was not necessary to reflash if you had followed the advices you got. The day you'll learn how to configure your tuners, this will be clear even to you.
Click to expand...

No problem with the DiSEQc and settings. It's the Unicable LNB that has problems.
 
Alexwilmac said:
Exactly. As I wrote, he hadn't set the DiseqC. So it couldn't work.
And, @Nor50 , it was not necessary to reflash if you had followed the advices you got. The day you'll learn how to configure your tuners, this will be clear even to you.
Click to expand...

What do you mean is wrong with my settings there?
 
0.8 west is an SatCR-lnb and has nothing to do with the input from the Diseqc-switch
 
Last edited:
You must log in or register to reply here.
Back
Top