no audio in alcuni canali iptv
- Thread starter vincy79
- Start date
angelofsky1980
BlackHole Driver Specialist
Thomas67
Vip
Just a stupid ide but sometimes its possible to forget the smallest things 
Since audio is DD (Dolby Digital) and DD is compressed
I could replicate your problem on my Vu+Uno4Kse when turning DolbyDigitale/DTS to "off"
When i set downmix to off i lose the audio but when set back to "on" audio is comming back.
I dont now how your audio settings are but check this setting
Since audio is DD (Dolby Digital) and DD is compressedI could replicate your problem on my Vu+Uno4Kse when turning DolbyDigitale/DTS to "off"
When i set downmix to off i lose the audio but when set back to "on" audio is comming back.
I dont now how your audio settings are but check this setting
zio
Vu+ User
Thomas67
Vip
Okey i installed latest BH 3.0.8 image on my Solo2 since nobody seems to be able and test this
My solo2 runs OBH image as default but this i just hade to see what was going on.
So i open the attached movie you uploaded and everytime i start the movie clip i get 2 seconds of sound and then all is dead mute.
So my next step was to mark the movie clip and press menu button and choose extplayer to play the movie.
And viola there was the audio so that gives an hint to where the audio problem is.
So simple sulition is to setup your IPTV boquet to use 5002 (ExtPlayer) instead of DVB-1 (Gstreamer)
Then you should have audion on your IPTV Channels with this audio settings
My solo2 runs OBH image as default but this i just hade to see what was going on.
So i open the attached movie you uploaded and everytime i start the movie clip i get 2 seconds of sound and then all is dead mute.
So my next step was to mark the movie clip and press menu button and choose extplayer to play the movie.
And viola there was the audio so that gives an hint to where the audio problem is.
So simple sulition is to setup your IPTV boquet to use 5002 (ExtPlayer) instead of DVB-1 (Gstreamer)
Then you should have audion on your IPTV Channels with this audio settings
Thomas67
Vip
Yes sorry i know this is Italian section but i cant write in Italiano.
But Yes I have a Vu+ Solo2 with OBH image but to test what you describe i installed BH 3.0.8 and in BH Speedup
i activated serviceApp, Whent to serviceApp menu and activated ExtPlayer.
Then i open your file that was attached earlier in this thread and as you report no audio.
So i marked the video clip in Movie Selection and pressed menu button. Now i choose play with extplayer
and it worked just fine. Got audio on the video clip
Since this works with the video clip and audio is working, if you use extplayer for IPTV Channel you record the clip you
will get audio on the channel also.
I dont now how you setup your IPTV? what plugin do you use to create boquets and iptv channels?
I strongly recommend JediMakerXtream with that plugin you can choose what player to use when creating your boquets and channels.
So for this provider i would choose ExtPlayer (5002) to get audio working.
I have attached your video clip so you can see i have use the one you uploaded
But Yes I have a Vu+ Solo2 with OBH image but to test what you describe i installed BH 3.0.8 and in BH Speedup
i activated serviceApp, Whent to serviceApp menu and activated ExtPlayer.
Then i open your file that was attached earlier in this thread and as you report no audio.
So i marked the video clip in Movie Selection and pressed menu button. Now i choose play with extplayer
and it worked just fine. Got audio on the video clip
Since this works with the video clip and audio is working, if you use extplayer for IPTV Channel you record the clip you
will get audio on the channel also.
I dont now how you setup your IPTV? what plugin do you use to create boquets and iptv channels?
I strongly recommend JediMakerXtream with that plugin you can choose what player to use when creating your boquets and channels.
So for this provider i would choose ExtPlayer (5002) to get audio working.
I have attached your video clip so you can see i have use the one you uploaded
zio
Vu+ User
hello, thanks for your tests. The problem as you say is to make iptv work. I have the list in my favorite bouquets and I don't use any plugins. I have a command from who passes it to me .. wget .. to send in telnet and create the bouqut with all the channels inside !! How can we do ?
zio
Vu+ User
Ma non posso farlo, sono tantissimi e al riavvio tornerebbe tutto cone prima!
Nelle istruzioni leggo:
Changing the setting in the ServiceApp menu, means that the image will no longer use the built in Mediaplayer (linked to Gstreamer) and will use ExtePlayer3 for all media playback for IPTV and streaming aswell as any movies / recordings on your hdd, doing this you won't need to convert your IPTV lists to #SERVICE 5002:0:1:
Se non ho capito male dice che basta cambiare e non c'e' bisogno di editare ??
"
Cambiando le impostazioni nel menu ServiceApp, significa che l'immagine non utilizzerà più il built-in Mediaplayer (collegato a Gstreamer) e userà ExtePlayer3 per tutta la riproduzione multimediale per IPTV e lo streaming e qualsiasi film / registrazione sul tuo hdd, facendo questo tu non avrà bisogno di convertire i tuoi elenchi IPTV in #SERVICE 5002: 0: 1:
"
Inviato dal mio SM-N910F utilizzando Tapatalk
Nelle istruzioni leggo:
Changing the setting in the ServiceApp menu, means that the image will no longer use the built in Mediaplayer (linked to Gstreamer) and will use ExtePlayer3 for all media playback for IPTV and streaming aswell as any movies / recordings on your hdd, doing this you won't need to convert your IPTV lists to #SERVICE 5002:0:1:
Se non ho capito male dice che basta cambiare e non c'e' bisogno di editare ??
"
Cambiando le impostazioni nel menu ServiceApp, significa che l'immagine non utilizzerà più il built-in Mediaplayer (collegato a Gstreamer) e userà ExtePlayer3 per tutta la riproduzione multimediale per IPTV e lo streaming e qualsiasi film / registrazione sul tuo hdd, facendo questo tu non avrà bisogno di convertire i tuoi elenchi IPTV in #SERVICE 5002: 0: 1:
"
Inviato dal mio SM-N910F utilizzando Tapatalk
Matrix10
Administrator
If you use editor
you can replace in your IPTV bouquets list all at once
example:
#SERVICE 1:
with
#SERVICE 5002:
https://www.editpadlite.com/
IN editpadlite use search>>Show search panel
In search >> replace all
#SERVICE 1:
with
#SERVICE 5002:
save and replace your IPTV bouquet
restart enigma2/box
============================
one minute of work to edit iptv list
you can replace in your IPTV bouquets list all at once
example:
#SERVICE 1:
with
#SERVICE 5002:
https://www.editpadlite.com/
IN editpadlite use search>>Show search panel
In search >> replace all
#SERVICE 1:
with
#SERVICE 5002:
save and replace your IPTV bouquet
restart enigma2/box
============================
one minute of work to edit iptv list
Last edited:
Thomas67
Vip
I created a new thread where i explain the use of plugin for the same purpouse as described by the Oldschool guys
Its probably faster to follow the instructions from Matrix and Shiro and they work 100% but whith the plugin
you can do so much more look in to this thread
https://www.vuplus-community.net/board/threads/jedimakerxtream-iptv-bouquet-plugin.38939/
zio
Vu+ User
Ciao ragazzi, ho ottime notizie.
Ho aggiornato la 3.0.8 ed e' andata alla 3.8.8 D.
Senza fare nulla il problema sembra proorio risolto!!
Il video si sente bene e anche iptv si sente con quella codifica.
Adesso prende la traccia nella finestra audio e se spegni o accendo dolby col tasto rosso funziona tutto!
Che abbiano risolto loro a seguito segnalazione o voi ?
Qualcuno ne sa' qualcosa?
Ho aggiornato la 3.0.8 ed e' andata alla 3.8.8 D.
Senza fare nulla il problema sembra proorio risolto!!
Il video si sente bene e anche iptv si sente con quella codifica.
Adesso prende la traccia nella finestra audio e se spegni o accendo dolby col tasto rosso funziona tutto!
Che abbiano risolto loro a seguito segnalazione o voi ?
Qualcuno ne sa' qualcosa?