AlexWilMac
Moderator
I take the chance to say that it's also possible, for whom who have it, to use a NAS.
Well you could be waiting a while for that i'm afraid as I am very busy with real life at the moment.
If you desperately need the Full Backup feature, then you are probably better off using another image for the moment.
Yes probably that will work too, although I have not tested it.I take the chance to say that it's also possible, for whom who have it, to use a NAS.
Ok so I found some time to install obh 4.3 into flash on Zero4K to test this myself.
I am using a clean image without restoring any personal backup.
Once installed I set the image up as normal and installed some channels, changed a few settings etc and mounted my usb.
I then created a fullbackup (no issue's found) to /media/usb
I then installed that fullbackup into OMB, this also worked fine and the image boots.
The problem occurs when you are using the image in OMB and then try and create a fullbackup as it creates the fullbackup to /omb which is the same location the image is running from (as the Zero4K only has 1 usb port).
So the solution for this, is to use the usb format wizard and partition your usb stick with more than 1 partition (this will mean it will delete everything on the usb stick, so back it all up first if you don't want to loose anything).
Then mount 1 partition as /omb and the other as something else and create your fullbackup to the 2nd partition (you need to go into the fullbackup option, press menu then change location to the 2nd partition).
Then it should create your fullbackup without issue.