static ip address

Sorry mate. Did not make myself clear, have changed DHCP to no, but do i change i.p address or netmask or gateway. Which one do i use as static address . Thanks for the quick reply by the way.
 
You must use ip address as the real address of your Uno, something like 192.168.0.10.
Netmask generally is 255.255.255.0 and gateway something like 192.168.0.1.
IP address and gateway (your router) depend on your local network addresses.
You must look at your pc ip address and then modify Uno's address.
 
bearman said:
Sorry mate. Did not make myself clear, have changed DHCP to no, but do i change i.p address or netmask or gateway. Which one do i use as static address . Thanks for the quick reply by the way.
Click to expand...

Sure ip addr
but the IP address must be in the range of IP addresses that the router supports
If you use router.
And address must not be in use.
 
If all OK,
If you put first box on the DHCP
You will have gateway,netmask e.t.c
After just replace the IP address and restart box.
 
Cheers .The reason i need to change static address is that i needed to change to connect to DCC .I used a number between 1 and 254 which i made a note of but did not make a note of which address to change. The reason i lost it was that i changed my blackhole image. Now i have to start from scratch again , learning how to ftp and get ***** going again. I originally just dropped lucky setting up . Thanks again for being so helpful.
 
bearman said:
Cheers .The reason i need to change static address is that i needed to change to connect to DCC .I used a number between 1 and 254 which i made a note of but did not make a note of which address to change. The reason i lost it was that i changed my blackhole image. Now i have to start from scratch again , learning how to ftp and get ***** going again. I originally just dropped lucky setting up . Thanks again for being so helpful.
Click to expand...

Do not forget
discussion abt emulators is not allowed here
read the forum rules.
For this we give Ban.

For this time only a warning.
 
Use the backup menu and create a personal backup before flashing new image.... I learnt that the hard way too :-)
 
Hi,

just for info, it's good to know what is dynamic range of your dhcp server, and setup static address outside of this range, because there is the chance, that two devices has the same address, so you may encounter really strange network problems :-)
 
hey i have uppgrade my vu+solo whit black hole 2.02 but now i cannot have contact between my pc and the vu+solo is some password i have to write?
 
komodo said:
Hi,

just for info, it's good to know what is dynamic range of your dhcp server, and setup static address outside of this range, because there is the chance, that two devices has the same address, so you may encounter really strange network problems :)
Click to expand...

In this case it is (imho) to let it obtain the IP thru DHCP, and make a "static/reserved" lease in the router so it will allways get the same ip.
 
komodo said:
That's true, but not all cheap routers have option to set up static DHCP lease :)
Click to expand...
I agree there are some routers that does not support it, but it is not many anymore i think.Chances are that you will end up resetting the vu+ box more often than the router, so use it whenever possible .
 
You must log in or register to reply here.
Back
Top