USB Tuner: AS102 devices

Status
Not open for further replies.

angelofsky1980

BlackHole Driver Specialist
Is this that we need?:

Code:
Vuplus 2.1.0 + BlackHole 1.6.6 vuuno
 
vuuno login: root
root@vuuno:~# cat /proc/bus/usb/devices
 
T:  Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 2.06
S:  Manufacturer=Linux 2.6.18-7.3 ohci_hcd
S:  Product=BRCM OHCI
S:  SerialNumber=ohci-brcm
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=  2 Ivl=255ms
 
T:  Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 2.06
S:  Manufacturer=Linux 2.6.18-7.3 ohci_hcd
S:  Product=BRCM OHCI
S:  SerialNumber=ohci-brcm
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=  2 Ivl=255ms
 
T:  Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=480 MxCh= 2
B:  Alloc=  0/800 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 2.06
S:  Manufacturer=Linux 2.6.18-7.3 ehci_hcd
S:  Product=BRCM EHCI
S:  SerialNumber=ehci-brcm
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=  2 Ivl=256ms
 
T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=480 MxCh= 2
B:  Alloc=  0/800 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 2.06
S:  Manufacturer=Linux 2.6.18-7.3 ehci_hcd
S:  Product=BRCM EHCI
S:  SerialNumber=ehci-brcm
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=  2 Ivl=256ms
 
T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=03f0 ProdID=5307 Rev=11.00
S:  Manufacturer=HP
S:  Product=v165w
S:  SerialNumber=AA04012700008469
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=31875us
 
T:  Bus=01 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#=  4 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=ff(vend.) Sub=ff Prot=ff MxPS=64 #Cfgs=  1
P:  Vendor=2013 ProdID=0246 Rev= 1.00
S:  Manufacturer=PCTV Systems
S:  Product=PCTV 74e
S:  SerialNumber=0000000M9C11LC3
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=300mA
I:  If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=Abilis Systems as10x usb driver
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
root@vuuno:~#

Thanks very much for your help angelofsky
What BH are you using? And in what box?
Other output command I need:
Code:
ps aux
 

bojja

Vu+ User
I am using BH 1.6.6 on Vu+ UNO,because with the BH 1.6.7 was freezing on booting/starting gui always.
This is the result of ps aux :

Code:
Vuplus 2.1.0 + BlackHole 1.6.6 vuuno
 
vuuno login: root
root@vuuno:~# Vuplus 2.1.0 + BlackHole 1.6.6 vuuno
-sh: Vuplus: not found  278 root        0 SW  [sched_idle]
  318 root        0 SW  [brcmv]
 
  326 root        0 SW  [fbt0]
  334 root        0 SW  [lcd]
  350 root        0 SW  [sc0]
  351 root        0 SW  [sc1]
root@vuuno:~#
  417 root        0 SW<  [kjournald]
  430 root      1796 S    /usr/bin/hotplug_br
  433 root      3468 S    /usr/bin/blackholesocker
  435 root      2512 S    /usr/sbin/crond -c /etc/bhcron/
  470 root      4128 S    nmbd -D
  472 root      6832 S    smbd -D
root@vuuno:~# vuuno login: root
-sh:  649 root      2260 S    /usr/sbin/automount --pid-file=/var/run/autofs/_autof
  705 avahi    3088 S    avahi-daemon: running [vuuno.local]
  715 root      2512 S    /bin/sh /usr/bin/enigma2.sh
  750 root        0 DW  [usbtuner]
  751 root    70388 S    /usr/bin/enigma2
  754 root    70388 S    /usr/bin/enigma2
  779 root    70388 S    /usr/bin/enigma2
  755 root        0 SW  [ca:0:4]
  758 root        0 SW  [ci_kthread]
  848 root      2832 S    telnetd
  849 root      2828 S    -sh
  863 root      2828 R    ps aux
root@vuuno:~#
vuuno: not found
root@vuuno:~# root@vuuno:~# ps aux
-sh: root@vuuno:~#: not found
root@vuuno:~#  PID USER      VSZ STAT COMMAND
-sh: PID: not found
root@vuuno:~#    1 root      1724 S    init [3]
-sh: 1: not found
root@vuuno:~#    2 root        0 SW  [migration/0]
-sh: 2: not found
root@vuuno:~#    3 root        0 SWN  [ksoftirqd/0]
-sh: 3: not found
root@vuuno:~#    4 root        0 SW  [migration/1]
-sh: 4: not found
root@vuuno:~#    5 root        0 SWN  [ksoftirqd/1]
-sh: 5: not found
root@vuuno:~#    6 root        0 SW<  [events/0]
-sh: can't open [events/0]: no such file
-sh: 6: not found
root@vuuno:~#    7 root        0 SW<  [events/1]
-sh: can't open [events/1]: no such file
-sh: 7: not found
root@vuuno:~#    8 root        0 SW<  [khelper]
-sh: can't open [khelper]: no such file
-sh: 8: not found
root@vuuno:~#    9 root        0 SW<  [kthread]
-sh: can't open [kthread]: no such file
-sh: 9: not found
root@vuuno:~#    10 root        0 SW<  [kblockd/0]
-sh: can't open [kblockd/0]: no such file
-sh: 10: not found
root@vuuno:~#    11 root        0 SW<  [kblockd/1]
-sh: can't open [kblockd/1]: no such file
-sh: 11: not found
root@vuuno:~#    12 root        0 SW<  [khubd]
-sh: can't open [khubd]: no such file
-sh: 12: not found
root@vuuno:~#    13 root        0 SW  [pdflush]
-sh: 13: not found
root@vuuno:~#    14 root        0 SW  [pdflush]
-sh: 14: not found
root@vuuno:~#    15 root        0 SW<  [kswapd0]
-sh: can't open [kswapd0]: no such file
-sh: 15: not found
root@vuuno:~#    16 root        0 SW<  [kswapd1]
-sh: can't open [kswapd1]: no such file
-sh: 16: not found
root@vuuno:~#    17 root        0 SW<  [aio/0]
-sh: can't open [aio/0]: no such file
-sh: 17: not found
root@vuuno:~#    18 root        0 SW<  [aio/1]
-sh: can't open [aio/1]: no such file
-sh: 18: not found
root@vuuno:~#    19 root        0 SW  [mtdblockd]
-sh: 19: not found
root@vuuno:~#    20 root        0 SWN  [jffs2_gcd_mtd0]
-sh: 20: not found
root@vuuno:~#    59 root      2184 S <  udevd --daemon
-sh: can't open udevd: no such file
-sh: 59: not found
root@vuuno:~#  181 root        0 SW<  [ata/0]
-sh: can't open [ata/0]: no such file
-sh: 181: not found
root@vuuno:~#  182 root        0 SW<  [ata/1]
-sh: can't open [ata/1]: no such file
-sh: 182: not found
root@vuuno:~#  185 root        0 SW<  [ata_aux]
-sh: can't open [ata_aux]: no such file
-sh: 185: not found
root@vuuno:~#  192 root        0 SW<  [scsi_eh_0]
-sh: can't open [scsi_eh_0]: no such file
-sh: 192: not found
root@vuuno:~#  195 root        0 SW<  [scsi_eh_1]
-sh: can't open [scsi_eh_1]: no such file
-sh: 195: not found
root@vuuno:~#  198 root        0 SW<  [scsi_eh_2]
-sh: can't open [scsi_eh_2]: no such file
-sh: 198: not found
root@vuuno:~#  199 root        0 SW<  [usb-storage]
-sh: can't open [usb-storage]: no such file
-sh: 199: not found
root@vuuno:~#  275 root        0 SW  [sched]
-sh: 275: not found
root@vuuno:~#  276 root        0 SW  [sched_low]
-sh: 276: not found
root@vuuno:~#  277 root        0 SW  [sched_high]
-sh: 277: not found
root@vuuno:~#  278 root        0 SW  [sched_idle]
-sh: 278: not found
root@vuuno:~#  318 root        0 SW  [brcmv]
-sh: 318: not found
root@vuuno:~#  326 root        0 SW  [fbt0]
-sh: 326: not found
root@vuuno:~#  334 root        0 SW  [lcd]
-sh: 334: not found
root@vuuno:~#  350 root        0 SW  [sc0]
-sh: 350: not found
root@vuuno:~#  351 root        0 SW  [sc1]
-sh: 351: not found
root@vuuno:~#  391 root        0 SW<  [cifsoplockd]
-sh: can't open [cifsoplockd]: no such file
-sh: 391: not found
root@vuuno:~#  392 root        0 SW<  [cifsdnotifyd]
-sh: can't open [cifsdnotifyd]: no such file
-sh: 392: not found
root@vuuno:~#  417 root        0 SW<  [kjournald]
-sh: can't open [kjournald]: no such file
-sh: 417: not found
root@vuuno:~#  430 root      1796 S    /usr/bin/hotplug_br
-sh: 430: not found
root@vuuno:~#  433 root      3468 S    /usr/bin/blackholesocker
-sh: 433: not found
root@vuuno:~#  435 root      2512 S    /usr/sbin/crond -c /etc/bhcron/
-sh: 435: not found
root@vuuno:~#  470 root      4128 S    nmbd -D
-sh: 470: not found
root@vuuno:~#  472 root      6832 S    smbd -D
-sh: 472: not found
root@vuuno:~#  516 messageb  2412 S    /usr/bin/dbus-daemon --system
-sh: 516: not found
root@vuuno:~#  520 root      6832 S    smbd -D
-sh: 520: not found
root@vuuno:~#  525 root      2352 S    /usr/sbin/dropbear -r /etc/dropbear/drop
bear_rsa_host
-sh: 525: not found
root@vuuno:~#  528 root      1836 S    /usr/sbin/inetd
-sh: 528: not found
root@vuuno:~#  531 root      2512 S    /sbin/syslogd -n -O /var/log/messages -s
32 -b 1 -m 2
-sh: 531: not found
root@vuuno:~#  533 root      2512 S    /sbin/klogd -n
-sh: 533: not found
root@vuuno:~#  649 root      2260 S    /usr/sbin/automount --pid-file=/var/run/
autofs/_autof
-sh: 649: not found
root@vuuno:~#  705 avahi    3088 S    avahi-daemon: running [vuuno.local]
-sh: 705: not found
root@vuuno:~#  715 root      2512 S    /bin/sh /usr/bin/enigma2.sh
-sh: 715: not found
root@vuuno:~#  750 root        0 DW  [usbtuner]
-sh: 750: not found
root@vuuno:~#  751 root    70388 S    /usr/bin/enigma2
-sh: 751: not found
root@vuuno:~#  754 root    70388 S    /usr/bin/enigma2
-sh: 754: not found
root@vuuno:~#  779 root    70388 S    /usr/bin/enigma2
-sh: 779: not found
root@vuuno:~#  755 root        0 SW  [ca:0:4]
-sh: 755: not found
root@vuuno:~#  758 root        0 SW  [ci_kthread]
-sh: 758: not found
root@vuuno:~#  848 root      2832 S    telnetd
-sh: 848: not found
root@vuuno:~#  849 root      2828 S    -sh
-sh: 849: not found
root@vuuno:~#  863 root      2828 R    ps aux
-sh: 863: not found
root@vuuno:~# root@vuuno:~#
-sh: root@vuuno:~#: not found
root@vuuno:~#
 

angelofsky1980

BlackHole Driver Specialist
I am using BH 1.6.6 on Vu+ UNO,because with the BH 1.6.7 was freezing on booting/starting gui always.
This is the result of ps aux :

Code:
Vuplus 2.1.0 + BlackHole 1.6.6 vuuno
 
vuuno login: root
root@vuuno:~# Vuplus 2.1.0 + BlackHole 1.6.6 vuuno
-sh: Vuplus: not found  278 root        0 SW  [sched_idle]
  318 root        0 SW  [brcmv]
 
  326 root        0 SW  [fbt0]
  334 root        0 SW  [lcd]
  350 root        0 SW  [sc0]
  351 root        0 SW  [sc1]
root@vuuno:~#
  417 root        0 SW<  [kjournald]
  430 root      1796 S    /usr/bin/hotplug_br
  433 root      3468 S    /usr/bin/blackholesocker
  435 root      2512 S    /usr/sbin/crond -c /etc/bhcron/
  470 root      4128 S    nmbd -D
  472 root      6832 S    smbd -D
root@vuuno:~# vuuno login: root
-sh:  649 root      2260 S    /usr/sbin/automount --pid-file=/var/run/autofs/_autof
  705 avahi    3088 S    avahi-daemon: running [vuuno.local]
  715 root      2512 S    /bin/sh /usr/bin/enigma2.sh
  750 root        0 DW  [usbtuner]
  751 root    70388 S    /usr/bin/enigma2
  754 root    70388 S    /usr/bin/enigma2
  779 root    70388 S    /usr/bin/enigma2
  755 root        0 SW  [ca:0:4]
  758 root        0 SW  [ci_kthread]
  848 root      2832 S    telnetd
  849 root      2828 S    -sh
  863 root      2828 R    ps aux
root@vuuno:~#
vuuno: not found
root@vuuno:~# root@vuuno:~# ps aux
-sh: root@vuuno:~#: not found
root@vuuno:~#  PID USER      VSZ STAT COMMAND
-sh: PID: not found
root@vuuno:~#    1 root      1724 S    init [3]
-sh: 1: not found
root@vuuno:~#    2 root        0 SW  [migration/0]
-sh: 2: not found
root@vuuno:~#    3 root        0 SWN  [ksoftirqd/0]
-sh: 3: not found
root@vuuno:~#    4 root        0 SW  [migration/1]
-sh: 4: not found
root@vuuno:~#    5 root        0 SWN  [ksoftirqd/1]
-sh: 5: not found
root@vuuno:~#    6 root        0 SW<  [events/0]
-sh: can't open [events/0]: no such file
-sh: 6: not found
root@vuuno:~#    7 root        0 SW<  [events/1]
-sh: can't open [events/1]: no such file
-sh: 7: not found
root@vuuno:~#    8 root        0 SW<  [khelper]
-sh: can't open [khelper]: no such file
-sh: 8: not found
root@vuuno:~#    9 root        0 SW<  [kthread]
-sh: can't open [kthread]: no such file
-sh: 9: not found
root@vuuno:~#    10 root        0 SW<  [kblockd/0]
-sh: can't open [kblockd/0]: no such file
-sh: 10: not found
root@vuuno:~#    11 root        0 SW<  [kblockd/1]
-sh: can't open [kblockd/1]: no such file
-sh: 11: not found
root@vuuno:~#    12 root        0 SW<  [khubd]
-sh: can't open [khubd]: no such file
-sh: 12: not found
root@vuuno:~#    13 root        0 SW  [pdflush]
-sh: 13: not found
root@vuuno:~#    14 root        0 SW  [pdflush]
-sh: 14: not found
root@vuuno:~#    15 root        0 SW<  [kswapd0]
-sh: can't open [kswapd0]: no such file
-sh: 15: not found
root@vuuno:~#    16 root        0 SW<  [kswapd1]
-sh: can't open [kswapd1]: no such file
-sh: 16: not found
root@vuuno:~#    17 root        0 SW<  [aio/0]
-sh: can't open [aio/0]: no such file
-sh: 17: not found
root@vuuno:~#    18 root        0 SW<  [aio/1]
-sh: can't open [aio/1]: no such file
-sh: 18: not found
root@vuuno:~#    19 root        0 SW  [mtdblockd]
-sh: 19: not found
root@vuuno:~#    20 root        0 SWN  [jffs2_gcd_mtd0]
-sh: 20: not found
root@vuuno:~#    59 root      2184 S <  udevd --daemon
-sh: can't open udevd: no such file
-sh: 59: not found
root@vuuno:~#  181 root        0 SW<  [ata/0]
-sh: can't open [ata/0]: no such file
-sh: 181: not found
root@vuuno:~#  182 root        0 SW<  [ata/1]
-sh: can't open [ata/1]: no such file
-sh: 182: not found
root@vuuno:~#  185 root        0 SW<  [ata_aux]
-sh: can't open [ata_aux]: no such file
-sh: 185: not found
root@vuuno:~#  192 root        0 SW<  [scsi_eh_0]
-sh: can't open [scsi_eh_0]: no such file
-sh: 192: not found
root@vuuno:~#  195 root        0 SW<  [scsi_eh_1]
-sh: can't open [scsi_eh_1]: no such file
-sh: 195: not found
root@vuuno:~#  198 root        0 SW<  [scsi_eh_2]
-sh: can't open [scsi_eh_2]: no such file
-sh: 198: not found
root@vuuno:~#  199 root        0 SW<  [usb-storage]
-sh: can't open [usb-storage]: no such file
-sh: 199: not found
root@vuuno:~#  275 root        0 SW  [sched]
-sh: 275: not found
root@vuuno:~#  276 root        0 SW  [sched_low]
-sh: 276: not found
root@vuuno:~#  277 root        0 SW  [sched_high]
-sh: 277: not found
root@vuuno:~#  278 root        0 SW  [sched_idle]
-sh: 278: not found
root@vuuno:~#  318 root        0 SW  [brcmv]
-sh: 318: not found
root@vuuno:~#  326 root        0 SW  [fbt0]
-sh: 326: not found
root@vuuno:~#  334 root        0 SW  [lcd]
-sh: 334: not found
root@vuuno:~#  350 root        0 SW  [sc0]
-sh: 350: not found
root@vuuno:~#  351 root        0 SW  [sc1]
-sh: 351: not found
root@vuuno:~#  391 root        0 SW<  [cifsoplockd]
-sh: can't open [cifsoplockd]: no such file
-sh: 391: not found
root@vuuno:~#  392 root        0 SW<  [cifsdnotifyd]
-sh: can't open [cifsdnotifyd]: no such file
-sh: 392: not found
root@vuuno:~#  417 root        0 SW<  [kjournald]
-sh: can't open [kjournald]: no such file
-sh: 417: not found
root@vuuno:~#  430 root      1796 S    /usr/bin/hotplug_br
-sh: 430: not found
root@vuuno:~#  433 root      3468 S    /usr/bin/blackholesocker
-sh: 433: not found
root@vuuno:~#  435 root      2512 S    /usr/sbin/crond -c /etc/bhcron/
-sh: 435: not found
root@vuuno:~#  470 root      4128 S    nmbd -D
-sh: 470: not found
root@vuuno:~#  472 root      6832 S    smbd -D
-sh: 472: not found
root@vuuno:~#  516 messageb  2412 S    /usr/bin/dbus-daemon --system
-sh: 516: not found
root@vuuno:~#  520 root      6832 S    smbd -D
-sh: 520: not found
root@vuuno:~#  525 root      2352 S    /usr/sbin/dropbear -r /etc/dropbear/drop
bear_rsa_host
-sh: 525: not found
root@vuuno:~#  528 root      1836 S    /usr/sbin/inetd
-sh: 528: not found
root@vuuno:~#  531 root      2512 S    /sbin/syslogd -n -O /var/log/messages -s
32 -b 1 -m 2
-sh: 531: not found
root@vuuno:~#  533 root      2512 S    /sbin/klogd -n
-sh: 533: not found
root@vuuno:~#  649 root      2260 S    /usr/sbin/automount --pid-file=/var/run/
autofs/_autof
-sh: 649: not found
root@vuuno:~#  705 avahi    3088 S    avahi-daemon: running [vuuno.local]
-sh: 705: not found
root@vuuno:~#  715 root      2512 S    /bin/sh /usr/bin/enigma2.sh
-sh: 715: not found
root@vuuno:~#  750 root        0 DW  [usbtuner]
-sh: 750: not found
root@vuuno:~#  751 root    70388 S    /usr/bin/enigma2
-sh: 751: not found
root@vuuno:~#  754 root    70388 S    /usr/bin/enigma2
-sh: 754: not found
root@vuuno:~#  779 root    70388 S    /usr/bin/enigma2
-sh: 779: not found
root@vuuno:~#  755 root        0 SW  [ca:0:4]
-sh: 755: not found
root@vuuno:~#  758 root        0 SW  [ci_kthread]
-sh: 758: not found
root@vuuno:~#  848 root      2832 S    telnetd
-sh: 848: not found
root@vuuno:~#  849 root      2828 S    -sh
-sh: 849: not found
root@vuuno:~#  863 root      2828 R    ps aux
-sh: 863: not found
root@vuuno:~# root@vuuno:~#
-sh: root@vuuno:~#: not found
root@vuuno:~#
Very very strange!
I'm sure the PCTV 74e is supported into BH 1.6.7 and also in previous versions like 1.6.6.
About freezes of new image .... we can try to help you ...

Remember for 1.6.6: enable USB Tuner into dedicated panel prior to use it.
 

bojja

Vu+ User
6sqmhj.jpg
I don't know if this can help us,i entered in my uno command with the dcce -ftp/lib/firmware and i found two files finish with hex,not with fw !!


6sqmhj.jpg
6sqmhj.jpg
 

bojja

Vu+ User
For the curiosity,i tried this PCTV 74e tuner on my other receiver Dm 800 with the image of edg nemesis 2.4 and it works properly
 

angelofsky1980

BlackHole Driver Specialist
For the curiosity,i tried this PCTV 74e tuner on my other receiver Dm 800 with the image of edg nemesis 2.4 and it works properly
I repeat: my PCTV 74e works correctly on Duo LE and Uno ... I think you should retry with BH 1.7.0 :)
 

bojja

Vu+ User
Yes,i'm waiting for the new image to try it maybe tonight after finish from my work.Thanks my friend :notworthy:
 

bojja

Vu+ User
I tried on the latest state of the art image of BH 170 image and still (Dummy tuner-Not supported).I think this pctv 74e is damaged ,because still with the same problems and is freezing the vu+ uno image sometimes and i tried more than one images.I tried aswell this tuner on my dm800 with edg Nemesis 2.4 and the begining was working good,but on later the dm was freezing aswell somtimes and was corrupting the network and the dm channel list,so i am packing this tuner to send it back to the seller,thanks very very much my friend angelofsky.
 

angelofsky1980

BlackHole Driver Specialist
I tried on the latest state of the art image of BH 170 image and still (Dummy tuner-Not supported).I think this pctv 74e is damaged ,because still with the same problems and is freezing the vu+ uno image sometimes and i tried more than one images.I tried aswell this tuner on my dm800 with edg Nemesis 2.4 and the begining was working good,but on later the dm was freezing aswell somtimes and was corrupting the network and the dm channel list,so i am packing this tuner to send it back to the seller,thanks very very much my friend angelofsky.
I hope you can get back a working tuner. I've also the same model and works great :) Very sensitive device :)
 

UltraB

Vu+ Newbie
Hi Friends, my PCTV 74E has arrived :)

I have a problem, with BH VU Uno 1.7.0 does not automatically detect the pctv74e : (
Have to go to any menu to activate pctv74e ????
 

el_zari

BH Lover
Please, be patiente!! Angelo is working very hard to implement dtt drivers.....

Thanks again Angelo for your work...

Regards from Spain

:ice:
 

UltraB

Vu+ Newbie
BH VU Uno 1.7.2 does not detect the usb tuner pctv74e :(

And when trying to restart the image on the box is blocked 1.7.2 with pctv74e inserted into the USB port.
 

bojja

Vu+ User
@ultraB,last month i bought one of this tuner pctv 74e from ebay but i sent it back to the seller after several time with no luck with my vu+ uno BH image and my Dreambox 800 Nemesis image....Now I am using tuners CIT - Model : TVC-001U and Aver Media AverTv - DVBT Volar X and they are working pretty on my two receivers Vu+ Uno and Dreambox 800
 
Status
Not open for further replies.
Top