Open BlackHole Online Update

[Shiro]

vu+ultimo4k WALAN connection [ wireless network no working OpenBH 5]
thank you

Works fine
Check your network.

 

[don_hidalgo26]

5.0.004 available.

Installed 5.0.004 in duo 4k and solo 4k.
Everything work fine.
Thank you!

Inviato dal mio CPH2173 utilizzando Tapatalk

 

[gim68]

Installed 5.0.004 in Vu Ultimo 4k inadyn in the procedure of data entry with the remote control it crashes with green screen...
problem also found in previous versions.

 

[Ev0]

Installed 5.0.004 in Vu Ultimo 4k inadyn in the procedure of data entry with the remote control it crashes with green screen...
problem also found in previous versions.

Now fixed, should be working again in next update

 

[hall9000]

good morning

I follow the usual update procedure, but update loops all the time without updating.
Only way to unlock remove power...

Thanks

Hall

 

[valery84]

Is it possible to use lcd4linux in this version? Because it seems that generic lcd skin predominate over lcd4linux configuration

 

[p.rodrigues]

View attachment 51333View attachment 51334View attachment 51335


good morning

I follow the usual update procedure, but update loops all the time without updating.
Only way to unlock remove power...

Thanks

Hall

It is not the only way or the most appropriate... by telnet: reboot

You do so: install the image on the box again, sets only the network. After by telnet: opkg update && opkg upgrade

Finished the process, by telnet: reboot

 

[p.rodrigues]

Is it possible to use lcd4linux in this version? Because it seems that generic lcd skin predominate over lcd4linux configuration

Yes, it is possible. In feeds is to download the LCD4Linux.

 

[dpeddi]

View attachment 51333View attachment 51334View attachment 51335


good morning

I follow the usual update procedure, but update loops all the time without updating.
Only way to unlock remove power...

Thanks

Hall

Does the issue persists?

If yes, please:

- during the loop try to retrieve the content of "/var/log/backupmanager.log" and post here
- during the loop try to telnet/ssh to the box and digit following command:

mount

and post the output here...


df

and post the output here...

You should get something like this:
root@vuultimo4k:~# df
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/root 3655616 1582092 1868112 46% /
devtmpfs 799592 4 799588 0% /dev
tmpfs 64 0 64 0% /media
/dev/sda1 488161280 259731600 228429680 53% /media/hdd
tmpfs 807912 1204 806708 0% /var/volatile
tmpfs 807912 0 807912 0% /sys/fs/cgroup
root@vuultimo4k:~#

if the command doesn't return to the prompt and it seems it never ends, probably you have an issue with mounted devices

E.

 

[valery84]

Yes, it is possible. In feeds is to download the LCD4Linux.

I downloaded it, but after set up lcd4linux, the lcd remains with generic skin

 

[p.rodrigues]

Does the issue persists?

If yes, please:

- during the loop try to retrieve the content of "/var/log/backupmanager.log" and post here
- during the loop try to telnet/ssh to the box and digit following command:

mount

and post the output here...


df

and post the output here...

You should get something like this:
root@vuultimo4k:~# df
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/root 3655616 1582092 1868112 46% /
devtmpfs 799592 4 799588 0% /dev
tmpfs 64 0 64 0% /media
/dev/sda1 488161280 259731600 228429680 53% /media/hdd
tmpfs 807912 1204 806708 0% /var/volatile
tmpfs 807912 0 807912 0% /sys/fs/cgroup
root@vuultimo4k:~#

if the command doesn't return to the prompt and it seems it never ends, probably you have an issue with mounted devices

E.

The mounted devices are the same as in OBH 4.4, with which there is no problem or did not exist until the last update.... until I can try to put OBH 4.4 in OMB using the same devices, and verify that this happens.

 

[p.rodrigues]

I downloaded it, but after set up lcd4linux, the lcd remains with generic skin

Use the LCD4Linux earlier? If yes it is to send the Box the lcd4config file that uses and the skin_user file.

 

[don_hidalgo26]

The mounted devices are the same as in OBH 4.4, with which there is no problem or did not exist until the last update.... until I can try to put OBH 4.4 in OMB using the same devices, and verify that this happens.

I have the same problem on my duo 4k and solo 4k. It is improbable to have the same problem on two stb!
Moreover It is two days that I update my stb (60/70 updates) without a change in the version that Is always obh 5 update 4.

Inviato dal mio CPH2173 utilizzando Tapatalk

 

[Ev0]

I have the same problem on my duo 4k and solo 4k. It is improbable to have the same problem on two stb!
Moreover It is two days that I update my stb (60/70 updates) without a change in the version that Is always obh 5 update 4.

Inviato dal mio CPH2173 utilizzando Tapatalk

004 is current version

 

[valery84]

Use the LCD4Linux earlier? If yes it is to send the Box the lcd4config file that uses and the skin_user file.

it was just like that! thank you for your suggestion

 

[Ev0]

View attachment 51333View attachment 51334View attachment 51335


good morning

I follow the usual update procedure, but update loops all the time without updating.
Only way to unlock remove power...

Thanks

Hall

We have fixed this, so for the next update either switch to English language, or use telnet.

Afterwards you can switch back to your chosen language.

 

[hall9000]

We have fixed this, so for the next update either switch to English language, or use telnet.

Afterwards you can switch back to your chosen language.

Hello Ev0

I listened to your suggestion and used telnet and got the update to 4 version

Thanks

Hall

 

[AlexWilMac]

Major update of 5.0.004 available. Obviously, I did by command line; otherwise, you must follow the advice by Ev0 in post #1076.

 

[miah]

dear sir
if i press blue button my uno4k se box is crasing obh 5
thank you

 

[AlexWilMac]

Dear user,
if you don't post the crashlog file (zipped) your post isn't of any use.