PCSC-Lite packages for OE 1.6 Images (Duo and Solo)

[gobi2000]

pcscd daemon logo

root@bm750:/# pcscd -f -d
00000000 pcscdaemon.c:267:main() pcscd set to foreground with debug send to stderr
00000240 debuglog.c:239ebugLogSetLevel() debug level=debug
00001776 pcscdaemon.c:505:main() pcsc-lite 1.5.2 daemon ready.
01567053 hotplug_libhal.c:490:HPRegisterForHotplugEvents() Could not initialise connection to hald.
00000109 hotplug_libhal.c:491:HPRegisterForHotplugEvents() Normally this means the HAL daemon (hald) is not running or not ready.
00000064 pcscdaemon.c:524:main() SVCServiceRunLoop returned
00000051 pcscdaemon.c:530:at_exit() cleaning /var/run/pcscd

 

[angelofsky1980]

And how to run pcscd daemon ?

If you have installed all the packages in this post (for your box of course) the PCSCD daemon is running when the box boot.
You can verify the daemon is running with

ps aux | grep pcscd

 

[angelofsky1980]

pcscd daemon logo

Have you installed the bh.tgz package on the first post?

 

[gobi2000]

Yes !

 

[angelofsky1980]

Yes !

I've verified your box (thanks for your PM) and seems that you don't have installed the pcscd_init_bh.tgz package.

I've installed it for you and now pcscd daemon run correctly

 

[gobi2000]

When he sees pcsc ***** start site
My set *****.server

enable                        = 1
protocol                      = pcsc
Device                        = 0

log for *****

2011/04/23 20:09:18 2AAC63B0 s anticascader thread started
2011/04/23 20:09:18 2B8934B0 r ERROR opening device 0
2011/04/23 20:09:18 2B8934B0 r Cannot open device: 0

Deburg pcscd

root@bm750:/usr/bin# pcscd -f -d
00000000 pcscdaemon.c:267:main() pcscd set to foreground with debug send to stderr
00000147 debuglog.c:239:DebugLogSetLevel() debug level=debug
00000996 pcscdaemon.c:337:main() file /var/run/pcscd/pcscd.pub already exists.
00000123 pcscdaemon.c:339:main() Another pcscd (pid: 3010) seems to be running.

Driver run ok
cat /proc/bus/usb/devices

T:  Bus=01 Lev=03 Prnt=03 Port=00 Cnt=01 Dev#=  8 Spd=12  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=076b ProdID=1021 Rev= 1.00
S:  Manufacturer=OMNIKEY
S:  Product=Smart Card Reader USB
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=0b(scard) Sub=00 Prot=00 Driver=usbfs
E:  Ad=83(I) Atr=03(Int.) MxPS=   8 Ivl=24ms
E:  Ad=84(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=05(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms



 

[angelofsky1980]

When he sees pcsc ***** start site
My set *****.server

enable                        = 1
protocol                      = pcsc
Device                        = 0

log for *****

2011/04/23 20:09:18 2AAC63B0 s anticascader thread started
2011/04/23 20:09:18 2B8934B0 r ERROR opening device 0
2011/04/23 20:09:18 2B8934B0 r Cannot open device: 0

Deburg pcscd

root@bm750:/usr/bin# pcscd -f -d
00000000 pcscdaemon.c:267:main() pcscd set to foreground with debug send to stderr
00000147 debuglog.c:239:DebugLogSetLevel() debug level=debug
00000996 pcscdaemon.c:337:main() file /var/run/pcscd/pcscd.pub already exists.
00000123 pcscdaemon.c:339:main() Another pcscd (pid: 3010) seems to be running.

Driver run ok
cat /proc/bus/usb/devices

T:  Bus=01 Lev=03 Prnt=03 Port=00 Cnt=01 Dev#=  8 Spd=12  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=076b ProdID=1021 Rev= 1.00
S:  Manufacturer=OMNIKEY
S:  Product=Smart Card Reader USB
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=0b(scard) Sub=00 Prot=00 Driver=usbfs
E:  Ad=83(I) Atr=03(Int.) MxPS=   8 Ivl=24ms
E:  Ad=84(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=05(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms



Talk about EMU/SW Cam is not allowed on the Board.

To verify if pcscd is currently running please use

ps aux | grep pcscd

If you want to execute the daemon in foreground do the following commands:

killall pcscd
 pcscd -f -d

 

[gobi2000]

In just moments pcsc that is run after a while it dies and never sees the cards, escte possibly a script to see if they are ok?

 

[gobi2000]

Whay it not ismode al driver ?

T:  Bus=01 Lev=03 Prnt=04 Port=03 Cnt=03 Dev#= 17 Spd=12  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=076b ProdID=3021 Rev= 3.02
S:  Manufacturer=OMNIKEY AG
S:  Product=Smart Card Reader USB
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=0b(scard) Sub=00 Prot=00 Driver=(none)
E:  Ad=83(I) Atr=03(Int.) MxPS=   8 Ivl=24ms
E:  Ad=84(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=05(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms

T:  Bus=01 Lev=02 Prnt=02 Port=01 Cnt=02 Dev#=  5 Spd=12  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=076b ProdID=3021 Rev= 3.02
S:  Manufacturer=OMNIKEY AG
S:  Product=Smart Card Reader USB
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=0b(scard) Sub=00 Prot=00 Driver=(none)
E:  Ad=83(I) Atr=03(Int.) MxPS=   8 Ivl=24ms
E:  Ad=84(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=05(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms

T:  Bus=01 Lev=02 Prnt=02 Port=02 Cnt=03 Dev#=  6 Spd=12  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=076b ProdID=3021 Rev= 3.02
S:  Manufacturer=OMNIKEY AG
S:  Product=Smart Card Reader USB
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=0b(scard) Sub=00 Prot=00 Driver=usbfs
E:  Ad=83(I) Atr=03(Int.) MxPS=   8 Ivl=24ms
E:  Ad=84(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=05(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms

T:  Bus=01 Lev=02 Prnt=02 Port=03 Cnt=04 Dev#=  7 Spd=12  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=076b ProdID=3021 Rev= 3.02
S:  Manufacturer=OMNIKEY AG
S:  Product=Smart Card Reader USB
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=0b(scard) Sub=00 Prot=00 Driver=(none)
E:  Ad=83(I) Atr=03(Int.) MxPS=   8 Ivl=24ms
E:  Ad=84(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=05(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms

T:  Bus=01 Lev=02 Prnt=02 Port=04 Cnt=05 Dev#=  8 Spd=12  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=076b ProdID=a022 Rev= 2.03
S:  Manufacturer=OMNIKEY AG
S:  Product=Smart Card Reader USB
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=0b(scard) Sub=00 Prot=00 Driver=(none)
E:  Ad=83(I) Atr=03(Int.) MxPS=   8 Ivl=24ms
E:  Ad=84(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=05(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms

T:  Bus=01 Lev=02 Prnt=02 Port=05 Cnt=06 Dev#=  9 Spd=12  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=076b ProdID=3021 Rev= 3.02
S:  Manufacturer=OMNIKEY AG
S:  Product=Smart Card Reader USB
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=0b(scard) Sub=00 Prot=00 Driver=(none)
E:  Ad=83(I) Atr=03(Int.) MxPS=   8 Ivl=24ms
E:  Ad=84(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=05(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms

T:  Bus=01 Lev=02 Prnt=02 Port=06 Cnt=07 Dev#= 10 Spd=12  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=076b ProdID=3021 Rev= 3.02
S:  Manufacturer=OMNIKEY AG
S:  Product=Smart Card Reader USB
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=0b(scard) Sub=00 Prot=00 Driver=(none)
E:  Ad=83(I) Atr=03(Int.) MxPS=   8 Ivl=24ms
E:  Ad=84(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=05(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms

 

[angelofsky1980]

Whay it not ismode al driver ?

T:  Bus=01 Lev=03 Prnt=04 Port=03 Cnt=03 Dev#= 17 Spd=12  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=076b ProdID=3021 Rev= 3.02
S:  Manufacturer=OMNIKEY AG
S:  Product=Smart Card Reader USB
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=0b(scard) Sub=00 Prot=00 Driver=(none)
E:  Ad=83(I) Atr=03(Int.) MxPS=   8 Ivl=24ms
E:  Ad=84(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=05(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms

T:  Bus=01 Lev=02 Prnt=02 Port=01 Cnt=02 Dev#=  5 Spd=12  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=076b ProdID=3021 Rev= 3.02
S:  Manufacturer=OMNIKEY AG
S:  Product=Smart Card Reader USB
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=0b(scard) Sub=00 Prot=00 Driver=(none)
E:  Ad=83(I) Atr=03(Int.) MxPS=   8 Ivl=24ms
E:  Ad=84(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=05(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms

T:  Bus=01 Lev=02 Prnt=02 Port=02 Cnt=03 Dev#=  6 Spd=12  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=076b ProdID=3021 Rev= 3.02
S:  Manufacturer=OMNIKEY AG
S:  Product=Smart Card Reader USB
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=0b(scard) Sub=00 Prot=00 Driver=usbfs
E:  Ad=83(I) Atr=03(Int.) MxPS=   8 Ivl=24ms
E:  Ad=84(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=05(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms

T:  Bus=01 Lev=02 Prnt=02 Port=03 Cnt=04 Dev#=  7 Spd=12  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=076b ProdID=3021 Rev= 3.02
S:  Manufacturer=OMNIKEY AG
S:  Product=Smart Card Reader USB
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=0b(scard) Sub=00 Prot=00 Driver=(none)
E:  Ad=83(I) Atr=03(Int.) MxPS=   8 Ivl=24ms
E:  Ad=84(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=05(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms

T:  Bus=01 Lev=02 Prnt=02 Port=04 Cnt=05 Dev#=  8 Spd=12  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=076b ProdID=a022 Rev= 2.03
S:  Manufacturer=OMNIKEY AG
S:  Product=Smart Card Reader USB
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=0b(scard) Sub=00 Prot=00 Driver=(none)
E:  Ad=83(I) Atr=03(Int.) MxPS=   8 Ivl=24ms
E:  Ad=84(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=05(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms

T:  Bus=01 Lev=02 Prnt=02 Port=05 Cnt=06 Dev#=  9 Spd=12  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=076b ProdID=3021 Rev= 3.02
S:  Manufacturer=OMNIKEY AG
S:  Product=Smart Card Reader USB
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=0b(scard) Sub=00 Prot=00 Driver=(none)
E:  Ad=83(I) Atr=03(Int.) MxPS=   8 Ivl=24ms
E:  Ad=84(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=05(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms

T:  Bus=01 Lev=02 Prnt=02 Port=06 Cnt=07 Dev#= 10 Spd=12  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=076b ProdID=3021 Rev= 3.02
S:  Manufacturer=OMNIKEY AG
S:  Product=Smart Card Reader USB
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=0b(scard) Sub=00 Prot=00 Driver=(none)
E:  Ad=83(I) Atr=03(Int.) MxPS=   8 Ivl=24ms
E:  Ad=84(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=05(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms

Because the software pcscd drives your devices and there is not kernel drivers for these devices (I will verify with my PCSCs this evening).

 

[gobi2000]

The problem is not that, the driver if there is what might make this the ordered 7 times (as many readers have this just moments)
If I restart it manually e * mu reader does not see them falling needles su driver what happens?

bm750 login: root
root@bm750:~# ps aux | grep hald
  689 haldaemo  4792 S    /usr/sbin/hald
  690 root      3312 S    hald-runner
  694 root      3380 S    hald-addon-input: Listening on /dev/input/event0 /dev
  698 root      3392 S    /usr/libexec/hald-addon-cpufreq
10265 root      2640 S    grep hald
root@bm750:~# ps aux | grep hald
  689 haldaemo  4792 S    /usr/sbin/hald
  690 root      3312 S    hald-runner
  694 root      3380 S    hald-addon-input: Listening on /dev/input/event0 /dev
  698 root      3392 S    /usr/libexec/hald-addon-cpufreq
10268 root      2640 R    grep hald
root@bm750:~# ps aux | grep hald
  689 haldaemo  4792 S    /usr/sbin/hald
  690 root      3312 S    hald-runner
  694 root      3380 S    hald-addon-input: Listening on /dev/input/event0 /dev
  698 root      3392 S    /usr/libexec/hald-addon-cpufreq
10270 root      2640 R    grep hald
root@bm750:~# ps aux | grep hald
  689 haldaemo  4792 S    /usr/sbin/hald
  690 root      3312 S    hald-runner
  694 root      3380 S    hald-addon-input: Listening on /dev/input/event0 /dev
  698 root      3392 S    /usr/libexec/hald-addon-cpufreq
10273 root      2640 R    grep hald
root@bm750:~# ps aux | grep hald
  689 haldaemo  4792 S    /usr/sbin/hald
  690 root      3312 S    hald-runner
  694 root      3380 S    hald-addon-input: Listening on /dev/input/event0 /dev
  698 root      3392 S    /usr/libexec/hald-addon-cpufreq
10276 root      2640 S    grep hald
root@bm750:~# ps aux | grep hald
  689 haldaemo  4792 S    /usr/sbin/hald
  690 root      3312 S    hald-runner
  694 root      3380 S    hald-addon-input: Listening on /dev/input/event0 /dev
  698 root      3392 S    /usr/libexec/hald-addon-cpufreq
10281 root      2640 S    grep hald
root@bm750:~# ps aux | grep hald
  689 haldaemo  4792 S    /usr/sbin/hald
  690 root      3312 S    hald-runner
  694 root      3380 S    hald-addon-input: Listening on /dev/input/event0 /dev
  698 root      3392 S    /usr/libexec/hald-addon-cpufreq
10285 root      2640 R    grep hald
root@bm750:~#