PCSC-Lite Packages Updated for OE 1.6 Images (all Vu+ boxes)

Status
Not open for further replies.
angelofsky1980

angelofsky1980

BlackHole Driver Specialist
I've made some builds around PCSC packages and I've obtained some ipkgs and I share it with the Community :)

Now this package is box-indipendent !

Package Details:
PCSC-Lite v1.6.1
CCID Drivers v1.3.13
LIBUSB v0.1.12

Installation Instructions:
If you have installed previous version of this kind of packages I suggest to start with a fresh image to avoid conflicts!

Copy all ipkg files into /tmp and install as usual.

Packages tested on my Vu+Uno :)
 

Attachments

Package Details:
PCSC-Lite v1.7.4
CCID Drivers v1.4.4
LIBUSB v1.0.4

Installation Instructions:
If you have installed previous version of this kind of packages I suggest to start with a fresh image to avoid conflicts or remove the old packages.

Pay attention to do not mix libraries/drivers!!!!!!!

Copy all ipkg files into /tmp and install as usual.

Packages tested on my Vu+Uno :)
 

Attachments

angelofsky1980 said:
Package Details:
PCSC-Lite v1.7.4
CCID Drivers v1.4.4
LIBUSB v1.0.4

Installation Instructions:
If you have installed previous version of this kind of packages I suggest to start with a fresh image to avoid conflicts or remove the old packages.

Pay attention to do not mix libraries/drivers!!!!!!!

Copy all ipkg files into /tmp and install as usual.

Packages tested on my Vu+Uno :)
Click to expand...
Hi angelofsky1980
Please can you inform me as to what these packages are used for ,as I am a newbie to this game and I like to learn.
Thanks
 
Hello mate,

Thank you so i understand from that you did rebuilded the 8 files on 4 new file right ?
after installation do we still need to upload also pcscd ? to etc\init.d ?

not sure if you know a problem using pcsc on Vu+duo with ***** after a while it give timeout , does those new drivers have some relation with that mean can fix that or somehow ?

cheerz
 
Panik said:
Hello mate,

Thank you so i understand from that you did rebuilded the 8 files on 4 new file right ?
after installation do we still need to upload also pcscd ? to etc\init.d ?

not sure if you know a problem using pcsc on Vu+duo with ***** after a while it give timeout , does those new drivers have some relation with that mean can fix that or somehow ?

cheerz
Click to expand...

I suggest to start with a clean image without previous packages and use only the lats released (PCSC-lite 1.7.4 and their dependencies).
I've a PCSC reader and works regularly from one month approx.
 
i have problem now installed fresh image + those new 4 driver omnikey dont work anymore

here what i get

PCSC failed establish context (8010001d)
Cannot open device: 0

how come ?

Thx
 
Panik said:
i have problem now installed fresh image + those new 4 driver omnikey dont work anymore

here what i get

PCSC failed establish context (8010001d)
Cannot open device: 0

how come ?

Thx
Click to expand...
Could you post some details about your readers.
How much readers do you use simultaneous?
 
mine is ACR38 reader
i use 1 reader only , before when i installed this pack : Pcscd_Vuduo_OE_1_6
worked fine for me

so i reload new fresh image & tried to install the last 4 files pack , but now i have Unknown
PCSC failed establish context (8010001d)
Cannot open device: 0

do you have an idea ?
 
Panik said:
mine is ACR38 reader
i use 1 reader only , before when i installed this pack : Pcscd_Vudu:confused:E_1_6
worked fine for me

so i reload new fresh image & tried to install the last 4 files pack , but now i have Unknown
PCSC failed establish context (8010001d)
Cannot open device: 0

do you have an idea ?
Click to expand...
Another user has your reader.
I will look into my PC where I've stored drivers....

I've alread published the drivers for your reader.
Look HERE and HERE :)
 
if you talk about this driver i found in other thread here by you ? acr38_v2_bh.tgz

i did upload via /tmp/

then rename to acr38_v2_bh.tar.gz

and manuall install but nothing happend did also restart

let me know

now i have

file /var/run/pcscd/pcscd.comm already exists

Thx
 
Panik said:
if you talk about this driver i found in other thread here by you ? acr38_v2_bh.tgz

i did upload via /tmp/

then rename to acr38_v2_bh.tar.gz

and manuall install but nothing happend did also restart

let me know

now i have

file /var/run/pcscd/pcscd.comm already exists

Thx
Click to expand...

Very strange.
I will check if there is a new update for your reader......
 
maybe there is a conflict between the 2 driver or 2 pcscd running or something ?
do you have a command to give me to check if all ok ? or log and so to help you detect the issue
 
here you if that help , get it back to windows pc and run ACS QuickView programm to give info , here is ouptput

Code: 
Checking for PC/SC readers

Loading PC/SC library...
PC/SC library is loaded
Checking PC/SC functions...
PC/SC functions loaded
Calling SCardEstablishContext...
Success!
Calling SCardListReaders...
Success!
Calling SCardConnect...ACS CCID USB Reader 0
Success!
Success!

ACS CCID USB Reader 0
Firmware Version: ACR38-112c

Calling SCardDisconnect...
Success!
 
Panik said:
maybe there is a conflict between the 2 driver or 2 pcscd running or something ?
do you have a command to give me to check if all ok ? or log and so to help you detect the issue
Click to expand...

You can try these commands on your box (telnet session):
Code: 
/etc/init.d/pcscd stop
killall pcscd
- reinstall the drivers v2 for your reader -
/etc/init.d/pcscd start
 
no way still unknown :suda:

2011/09/05 11:08:27 2C2814B0 r PCSC failed establish context (8010001d)
2011/09/05 11:08:27 2C2814B0 r Cannot open device:0

it start to be a nightmare
 
Panik said:
no way still unknown :suda:

2011/09/05 11:08:27 2C2814B0 r PCSC failed establish context (8010001d)
2011/09/05 11:08:27 2C2814B0 r Cannot open device:0

it start to be a nightmare
Click to expand...

Try to start PCSCD daemon by hand with this set of commands:
Code: 
/etc/init.d/pcscd stop
pcscd -f
Verify if your reader is correctly detected...
 
Code: 
root@bm750:~# pcscd -f
00000000 ccid_usb.c:680:ReadUSB() usb_bulk_read(003/002): Success
02002924 ccid_usb.c:680:ReadUSB() usb_bulk_read(003/002): Success
 
Status
Not open for further replies.
Back
Top