This board is now closed. The Blackhole image ended in 2020. The board will remain available in Read Only Mode, so all the posts from the last 15+ years are not lost. We thank you for being part of the community for the last 15+ years. You can join the OpenBh board if you have not already done so at www.openbh.net.

Ralink 3070/3370/5370/5372 driver for new Vu+ kernel

angelofsky1980 said:
In this thread there is the IPK for all Vu+ boxes that contains Ralink driver chipset.

Installation instructions:
a) put the IPK into a USB pendrive and connect it to your box. You will have the possibility to install IPK directly.
b) put the IPK into /tmp folder of your box and use the "Manual install IPK package" from BH Green Panel -> Yellow Button.

Supported devices will be avaiable on the second post of this thread.

Drivers avaiable! Make post here with feedback, please!
Click to expand...
Tank you very much
 
angelofsky1980 said:
In this thread there is the IPK for all Vu+ boxes that contains Ralink driver chipset.

Installation instructions:
a) put the IPK into a USB pendrive and connect it to your box. You will have the possibility to install IPK directly.
b) put the IPK into /tmp folder of your box and use the "Manual install IPK package" from BH Green Panel -> Yellow Button.

Supported devices will be avaiable on the second post of this thread.

Drivers avaiable! Make post here with feedback, please!
Click to expand...

thanks
 
angelofsky1980 said:
In this thread there is the IPK for all Vu+ boxes that contains Ralink driver chipset.

Installation instructions:
a) put the IPK into a USB pendrive and connect it to your box. You will have the possibility to install IPK directly.
b) put the IPK into /tmp folder of your box and use the "Manual install IPK package" from BH Green Panel -> Yellow Button.

Supported devices will be avaiable on the second post of this thread.

Drivers avaiable! Make post here with feedback, please!
Click to expand...
thx..
 
madrax said:
Hi angelofsky1980

I am using Blackhole 2.1.1 Enigma2 image

wifi usb not working. let you know i send you usb wifi telenet results

# lsusb
Bus 002 Device 002: ID 148f:5370
Bus 001 Device 001: ID 1d6b:0002
Bus 002 Device 001: ID 1d6b:0001

Please resolve this driver problem.

Thanks Kind regards
Click to expand...
THX
 
angelofsky1980 said:
In this thread there is the IPK for all Vu+ boxes that contains Ralink driver chipset.

Installation instructions:
a) put the IPK into a USB pendrive and connect it to your box. You will have the possibility to install IPK directly.
b) put the IPK into /tmp folder of your box and use the "Manual install IPK package" from BH Green Panel -> Yellow Button.

Supported devices will be avaiable on the second post of this thread.

Drivers avaiable! Make post here with feedback, please!
Click to expand...
OK
 
angelofsky1980 said:
In this thread there is the IPK for all Vu+ boxes that contains Ralink driver chipset.

Installation instructions:
a) put the IPK into a USB pendrive and connect it to your box. You will have the possibility to install IPK directly.
b) put the IPK into /tmp folder of your box and use the "Manual install IPK package" from BH Green Panel -> Yellow Button.

Supported devices will be avaiable on the second post of this thread.

Drivers avaiable! Make post here with feedback, please!
Click to expand...
 
Hi!

Is there an ipk package available - driver for RT5372 chip adapters? I have ASUS USB-N14 adapter and my Vu+ UNO4K SE (BH3.0.5.) doesn't see and recognize it.
Can you help on this?

Or - which are recomended wifi adapters for Uno 4K SE?
 
I have 2 wireless dongles (ASUS AC50)Ralink RT2870 and TL-WN823N V2(Realtek RTL8192EU) they don't work on VU+ UNO 4k...
Any help?
 
bonsoir
je suis connecté au LAN câblé dans mon menu il y a pas de LAND wifi je suis BH 2.1.7

comment je doit faire ?
 
Hello Folks,

I own a VU+ Zero running Black Hole 3.0.5 and a Tenda Wifi stick, driver Ralink 5370. Could anyone please advise/provide driver I should Use ?
I already tried 3070 for solo but did not work.

Thanks in advance
 
[QUOTE = "angelofsky1980, post: 145567, membre: 6"] Dans ce sujet, il y a l'IPK pour toutes les boîtes Vu + qui contient le chipset du pilote Ralink.

Instructions d'installation:
a) mettez l’IPK dans une clé USB et connectez-le à votre boîte. Vous aurez la possibilité d'installer directement IPK.
b) placez le dossier IPK dans / tmp de votre boîte et utilisez le "package IPK d'installation manuelle" de BH Green Panel -> bouton jaune.

Les appareils pris en charge seront disponibles sur le deuxième message de ce sujet.

Pilotes disponibles! Faites un post ici avec les commentaires, s'il vous plaît! [/CITATION]
jes for vu+solo
 
[QUOTE = "angelofsky1980, post: 145567, member: 6"] In questa discussione c'è l'IPK per tutte le caselle Vu + che contiene chipset driver Ralink.

Istruzioni per l'installazione:
a) inserisci l'IPK in una chiavetta USB e collegalo alla tua scatola. Avrai la possibilità di installare direttamente IPK.
b) metti l'IPK nella cartella / tmp della tua scatola e usa il "Pacchetto IPK di installazione manuale" da BH Green Panel -> Pulsante Giallo.

I dispositivi supportati saranno disponibili sul secondo post di questa discussione.

Driver disponibili! Crea un post qui con feedback, per favore! [/CITAZIONE]
grazie
 
You must log in or register to reply here.
Back
Top