Enhanced Movie Center Upgrade
- Thread starter Seth_72
- Start date
nunigaia
Moderator
I will do it ... asap ... and post the package for testing before feeds action.
thanks,
best regards
nunigaia
nunigaia
Moderator
Done --> Test it please, and reply.
Enhanced Movie Center last version from GIT.
best regards
nunigaia
nunigaia
Moderator
Dear @Seth_72,
One more for you to test ... thanks and reply.
I think you are using universal remote control ... afaik there´s no video button ..., although you can set if you wish for example as i have done on my DUO2 ( timeshift button ).
Define it on EMC setup Menu and save it.... When done, press the <PLAY> button you´ll get acess to Enhanced Movie Center ( Movie Files ).
*** ENHANCED MOVIE CENTER *** NEW REV GIT 1509
Attached File.
best regards
nunigaia
AlexWilMac
Moderator
Hi, nunigaia,
I supposed that EMC was (also) updated along with the image's updates but it seems, recalling this plugin's infos, that I'm using an old version (git20170817). I also tried to re-download from the addons panel. Is it "info" wrong or I need to update it manually?
I supposed that EMC was (also) updated along with the image's updates but it seems, recalling this plugin's infos, that I'm using an old version (git20170817). I also tried to re-download from the addons panel. Is it "info" wrong or I need to update it manually?
nunigaia
Moderator
Due to constant changes in the plugin code, I have last updated the "Enhanced Movie Center" plugin, without asking to place it for the time being (available) on the addons feeds.
If you want to test and use the lastest version, you must doing it "for now" by using the IPK attached on my post #68.
best regards
nunigaia
I try to use different buttons, (TV, radio, and more) and I have always same result. After set EMC to button nothing happens. EMC and neither the original function mapped to the button not start.
Seth_72
Vu+ User
I will do this tomorrow
nunigaia
Moderator
Seth_72
Vu+ User
Good evening Nunigaia.Don´t worry, when you have a spare time.
thanks
best regards
nunigaia
The emc works perfect and thats on vuduo 2 but on old duo its dont start but on duo i have emc 3.74 and duo is old box but very nice on duo2
schellicon
Vu+ Newbie
Hi Nunigaia,
thank you for that wonderful tool. But since version 1499 I have on my Solo 4K the problem, that at restart after installation the system crashes. It happens at the screen start of EMC on half visible screen.
It´s also the case under the latest version 1509. It may be of interest that on the Uno 4K everything works perfect, EMC runs as wanted. All run on BH305.
Are there any suggestions?
Thanks in advance
Guenter
thank you for that wonderful tool. But since version 1499 I have on my Solo 4K the problem, that at restart after installation the system crashes. It happens at the screen start of EMC on half visible screen.
It´s also the case under the latest version 1509. It may be of interest that on the Uno 4K everything works perfect, EMC runs as wanted. All run on BH305.
Are there any suggestions?
Thanks in advance
Guenter
schellicon
Vu+ Newbie
Hi,
can I give any additional info to enable the response?
Regards
Guenter
can I give any additional info to enable the response?
Regards
Guenter
nunigaia
Moderator
schellicon
Vu+ Newbie
Hi Nunigaia,
attached you´ll find the EMC crashlog.
Also I would like to modify the fault-report slightly:
When starting EMC by pushing the video-button EMC starts booting and the spinner starts running. The spinner runs now very long ( approx. 120 sec ) and then EMC start screen is fully visible.
Prior only the upper half of start-screen is visible. This extended procedure happens now on each EMC start !
Best regards
Guenter
attached you´ll find the EMC crashlog.
Also I would like to modify the fault-report slightly:
When starting EMC by pushing the video-button EMC starts booting and the spinner starts running. The spinner runs now very long ( approx. 120 sec ) and then EMC start screen is fully visible.
Prior only the upper half of start-screen is visible. This extended procedure happens now on each EMC start !
Best regards
Guenter
schellicon
Vu+ Newbie
Hi Nunigaia,
we solved the problem ourselves, everything is ok. now. No further activities are req´d.
EMC now is and runs perfect, even watching video on 128x speed and then back to normal speed is w/o. any probs possible. High speed video 128x works also now on visible moving picture.
Wish: Watching video on EMC and on Dual PIP TV.
Thank you for excellent work
Best regards
Guenter
we solved the problem ourselves, everything is ok. now. No further activities are req´d.
EMC now is and runs perfect, even watching video on 128x speed and then back to normal speed is w/o. any probs possible. High speed video 128x works also now on visible moving picture.
Wish: Watching video on EMC and on Dual PIP TV.
Thank you for excellent work
Best regards
Guenter