C
Cus2k
Guest
U reminded me of the old DOS command!
OT
everything is back to me
Again, you can't connect the dots looking forward; you can only connect them looking backwards.
SJ 2005
U reminded me of the old DOS command!
try this way:It wont install here... when i power up vu+duo whith usb-stick in, it says "reading usb" for a while and just starts up normally...
Could it be something wrong with the usb-stick? It works fine on my PC thogh. Its FAT32 formatted.
ive tried all 3 usb ports on the vu.
any brand of usb thats not supported on the vu+?
Why you don't have installed CFE Duo upgrade in your box?who can say my vu duo boot updated or not? I didnt install boot upgrade software but I installed black-hole.1.6.6-backup image
after telnet and cat /proc/mtd
dev: size erasesize name
mtd0: 07600000 00020000 "rootfs"
mtd1: 00400000 00020000 "kernel"
mtd2: 00200000 00020000 "boot"
mtd3: 00100000 00020000 "cfe"
................................................................
Thanks
No serial output = no help (in this case)...i trayed to update my bootloader this morning on my vuplus solo.
i waited one minutes and thes i power off.
The problem is that my box dont boot.
just red led on front side.
does someone have a solution for this problem ?
thanks
i already tried to connect with putty and hyper terminal, but nothing.
i also tried with vu tools, but at the second step, the prosses stop.
i think my vu+solo is dead
is it the same cable like for dreambox ?
i use one serial cable for flash my dreambox 500s with dream_up.
with putty or hyperterminal, i have not output. it is possible ?
You are not alone and Vu are aware that many users have done this, hopefully they will have a solution in the future.i think i did that (
so, there is not solution to my probleme ?