Black Hole Vu+ Solo2 v.2.0.6

[fostermills]

cheers mate

 

[roddiss]

Is the Sundtek MediaTV Digital Home(DVB-CT) working ok now?

 

[technomate]

Is the Sundtek MediaTV Digital Home(DVB-CT) working ok now?

many thanks

 

[dim_dim]

Can i use a usb flash to record on Vu solo2 or i have only to install an internal disk?

 

[Mito]

Can i use a usb flash to record on Vu solo2 or i have only to install an internal disk?

You can use it: http://vuplus-community.net/board/threads/how-to-setup-your-vu-for-recording-on-usb.5491/

 

[YipMan]

Can i use a usb flash to record on Vu solo2 or i have only to install an internal disk?

yes you can

 

[dim_dim]

Thank you Mito and Fantome for the immediate response.

 

[dim_dim]

Another question guys. On BH 2.0.6 and 2.0.5 too, i can't use PiP from two different Transopoders. I have a motorized dish and the cable is connected to Tuner B. Whatever choice i use for Tuner A like loop throught or same tuner or.... i can't use PiP from two different TPs at the same time and in addition if i want to transcode one channel to another Device, i can't use the second tuner to do this, so if i watch tv on laptop through streaming, the receiver's picture get black on the TV.

What am i doing wrong?

 

[angelofsky1980]

Another question guys. On BH 2.0.6 and 2.0.5 too, i can't use PiP from two different Transopoders. I have a motorized dish and the cable is connected to Tuner B. Whatever choice i use for Tuner A like loop throught or same tuner or.... i can't use PiP from two different TPs at the same time and in addition if i want to transcode one channel to another Device, i can't use the second tuner to do this, so if i watch tv on laptop through streaming, the receiver's picture get black on the TV.

What am i doing wrong?

You need two indipendent tuners to do all you write.
With a single cable and the second tuner configured as "loopback ..." you can see/transcode only channels from same TP and/or same band (H/V)

 

[dim_dim]

Is it the same thing as if i put an LNB with two outputs and every output to each receiver's tuners?

Can an LNB that has two outputs sychronize two different tp's at the same time?

 

[angelofsky1980]

Is it the same thing as if i put an LNB with two outputs and every output to each receiver's tuners?

Can an LNB that has two outputs sychronize two different tp's at the same time?

Yes you can

 

[chekker]

thanks a lot

 

[ragaey]

Thank You!

 

[satman35]

Thank you very much

 

[dim_dim]

As I mentioned above, I have a motorized dish and I like searching the feeds of satelliweb.com

When I search dvb-s feed I can choose auto in fec. When I have a dvb-s2 feed,there is no choice of auto! I must search between qpsk and 8psk all the fec fractions to find where do I have signal... Can you add auto choice for dvb-s2 too? Can you add search button on the signal checking menu so when I find the feed I can search the tp at the same time? Thank you!

 

[Pedro C]

I'm almost certain that issue has got nothing to do with BH images which are based on VU+ original ones. Ask VU+ to change that if at all possible ....

 

[Hakan Cetinkaya]

I`am new to BH 2.0.6. After installation I do not have access to my box VU+ uno by FTP and DLNA (can`t see on my computer). I use windows 8.1. Please advice.