GoTView SatelliteHD
- Thread starter Nexting
- Start date
angelofsky1980
BlackHole Driver Specialist
According to web infos, RF and Demod seems already supported by Linux, but for controller I need some infos and detailed photos of it to determine if it's supported or not.
Another useful info is the content of file /proc/bus/usb/devices when you connect your device to box.
angelofsky1980
BlackHole Driver Specialist
I need the content of that file.
Use this telnet command and post the output here:
Code:
cat /proc/bus/usb/devicesangelofsky1980
BlackHole Driver Specialist
angelofsky1980
BlackHole Driver Specialist
I need to recompile them.
I will do this operation on these days and publish here the IPKs and instructions to install it.
Nexting
Vu+ Newbie
Thank you.
A "Solo" for a no?
http://www.vuplus-community.net/board/threads/blackhole-vu-duo-v-1-5-multituner.2198
A "Solo" for a no?
http://www.vuplus-community.net/board/threads/blackhole-vu-duo-v-1-5-multituner.2198
angelofsky1980
BlackHole Driver Specialist
I publish here the driver for latest BH image 1.6.7.
Old images are not supported.
Nexting
Vu+ Newbie
Sorry.
Flashed - http://www.vuplus-community.net/boa...solo-1-5-1-multiboot-multituner-epgplus.2293/
chose (Usb Tuner Panel) Tevii S660.
He writes that he is not supported.
Flashed - http://www.vuplus-community.net/boa...solo-1-5-1-multiboot-multituner-epgplus.2293/
chose (Usb Tuner Panel) Tevii S660.
He writes that he is not supported.
angelofsky1980
BlackHole Driver Specialist
Your device use the same driver for TeVii S660 BUT I HAVEN'T RECOMPILED THEM!
I will recompile the driver this evening/night and I upload the files in this thread.
I inform you the drivers I will upload here are for BH 1.6.7. Old images NOT SUPPORTED.
angelofsky1980
BlackHole Driver Specialist
Install these IPKs, launch these commands
and reboot your box.
Your USB DVB-S2 device should work now.
If you have troubles.... please post here a "dmesg" output.
Code:
depmod.26
depmodYour USB DVB-S2 device should work now.
If you have troubles.... please post here a "dmesg" output.
angelofsky1980
BlackHole Driver Specialist
Have you rebooted your box?
I need "dmesg" when your box is rebooted to see if the driver is correct or not or there is any kind of log messages from kernel.
Nexting
Vu+ Newbie
Why, "Driver=(none)"?
T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1fe1 ProdID=5456 Rev= 0.00
S: Manufacturer=Max
S: Product=GoTView Satellite HD
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none)
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 0 Alt= 1 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none)
E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=500us
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=82(I) Atr=01(Isoc) MxPS=3030 Ivl=125us
I: If#= 0 Alt= 2 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none)
E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=500us
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=82(I) Atr=01(Isoc) MxPS=2178 Ivl=125us
I: If#= 0 Alt= 3 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none)
E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=500us
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=82(I) Atr=01(Isoc) MxPS=2058 Ivl=125us
I: If#= 0 Alt= 4 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none)
E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=500us
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=82(I) Atr=01(Isoc) MxPS= 970 Ivl=125us
I: If#= 0 Alt= 5 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none)
E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=500us
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=82(I) Atr=01(Isoc) MxPS= 684 Ivl=125us
I: If#= 0 Alt= 6 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none)
E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=500us
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=82(I) Atr=01(Isoc) MxPS= 940 Ivl=125us
T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1fe1 ProdID=5456 Rev= 0.00
S: Manufacturer=Max
S: Product=GoTView Satellite HD
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none)
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 0 Alt= 1 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none)
E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=500us
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=82(I) Atr=01(Isoc) MxPS=3030 Ivl=125us
I: If#= 0 Alt= 2 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none)
E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=500us
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=82(I) Atr=01(Isoc) MxPS=2178 Ivl=125us
I: If#= 0 Alt= 3 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none)
E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=500us
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=82(I) Atr=01(Isoc) MxPS=2058 Ivl=125us
I: If#= 0 Alt= 4 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none)
E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=500us
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=82(I) Atr=01(Isoc) MxPS= 970 Ivl=125us
I: If#= 0 Alt= 5 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none)
E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=500us
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=82(I) Atr=01(Isoc) MxPS= 684 Ivl=125us
I: If#= 0 Alt= 6 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none)
E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=500us
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=82(I) Atr=01(Isoc) MxPS= 940 Ivl=125us
angelofsky1980
BlackHole Driver Specialist
It's very strange.
I've added support for your USB DVB-S2 device but... I need to work more .. that (none) is not normale and I expect dw2102.