USB Tuner: AF9015 devices

Status
Not open for further replies.
Hello, I have TerraTec Cinergy T Stick Dual RC. It won't recognize in vu+duo. Dmesg will show:
"usb 2-1: new high speed USB device using brcm-ehci-1 and address 5
usb 2-1: configuration #1 chosen from 1 choice
input: Afatech DVB-T 2 as /class/input/input4
input: USB HID v1.01 Keyboard [Afatech DVB-T 2] on usb-ehci-brcm-1"

In ubuntu 11.10 it will recognize well. Ubuntu dmesg in attached file: Ubuntu_terratec.txt

Is there something what I'm doing wrong? I have istalled module af9015 as you can see in file: vu_lsmod.txt and firmware is present also: vu_firmware.txt

 

Attachments

Henu said:
Hello, I have TerraTec Cinergy T Stick Dual RC. It won't recognize in vu+duo. Dmesg will show:
"usb 2-1: new high speed USB device using brcm-ehci-1 and address 5
usb 2-1: configuration #1 chosen from 1 choice
input: Afatech DVB-T 2 as /class/input/input4
input: USB HID v1.01 Keyboard [Afatech DVB-T 2] on usb-ehci-brcm-1"

In ubuntu 11.10 it will recognize well. Ubuntu dmesg in attached file: Ubuntu_terratec.txt

Is there something what I'm doing wrong? I have istalled module af9015 as you can see in file: vu_lsmod.txt and firmware is present also: vu_firmware.txt
Click to expand...
I will look into source code ....
 
I have problems with my USB tuner AF-9015 since BH 6.5. A lot of bitmapping. Not the same bitmapping as with bad signal but horizontal stripes of bitmaps. Looks like a problem in new drivers. Cannot download the old drivers anymore.
 
I have problem with af9015 on vu uno bh 1.7.0 and ubstuner driver 0.3.8, it's able to find only VHF channel and not UHF, any suggest? thank you.
 
miamio82 said:
I have problem with af9015 on vu uno bh 1.7.0 and ubstuner driver 0.3.8, it's able to find only VHF channel and not UHF, any suggest? thank you.
Click to expand...
I should make some tests..... but first I should find my AF9015 device..... I don't where is in my house....
 
I have an AF9015 for 99% ( or AF9005 - 1%)(this usb goo.gl/rhDzR ) On version 1.3.0 i was using the drivers below :
Code: 
1. rapidshare.com/files/689144343/dm800-dvbt-af9015_14592-r001_del-1.tgz
or
Code: 
2. rapidshare.com/files/509331405/dm800-dvbt-af9005_14592-r001_del.tgz
and working fine ,

now i have 1.6.6 and cannot activate my usb dongle... can i manually install one of those two drivers ? because i can only choose from predefined drivers to use.... please advice.

The AF9015 (second driver on list not working)

cbw-6280a.jpg
 
Nikolas said:
I have an AF9015 for 99% ( or AF9005 - 1%)(this usb goo.gl/rhDzR ) On version 1.3.0 i was using the drivers below :
Code: 
1. rapidshare.com/files/689144343/dm800-dvbt-af9015_14592-r001_del-1.tgz
or
Code: 
2. rapidshare.com/files/509331405/dm800-dvbt-af9005_14592-r001_del.tgz
and working fine ,

now i have 1.6.6 and cannot activate my usb dongle... can i manually install one of those two drivers ? because i can only choose from predefined drivers to use.... please advice.

The AF9015 (second driver on list not working)

cbw-6280a.jpg
Click to expand...

I've removed the live links on your posts.
The links are for other boxes NOT SUPPORTED HERE and you cannot use them on Vu boxes.
You are using a very old image not yet supported. Upgrade it to a newer one.
 
Status
Not open for further replies.
Back
Top