USB DVB-S S2 supported?

[ripblade]

which one would you recommend the TeVii S650 DVB-S2 USB or TeVii S660 or maybe a different model

 

[ripblade]

I need some infos about your device first....

Hi angelofsky1980, I came across this one on eBay Mystique Sa TiX-S2 Sky USB HDTV do you think it works on the Duo?
It says it's lynix on the description I want to buy it it's going for €35 I will wait for your approval first thanks.

 

[angelofsky1980]

Hi angelofsky1980, I came across this one on eBay Mystique Sa TiX-S2 Sky USB HDTV do you think it works on the Duo?
It says it's lynix on the description I want to buy it it's going for €35 I will wait for your approval first thanks.

It's not clear what chipset / driver this device uses....

 

[ripblade]

It's not clear what chipset / driver this device uses....

I ask the seller a question regarding the tuner this what he replied

Hello,

I assume you want to hook that device to a Linux box in addition. Basically that works, as drivers for Linux are existing, nevertheless it requires maybe compilation of your Kernel etc.

So do you think I should take a chance and buy it?

 

[angelofsky1980]

I ask the seller a question regarding the tuner this what he replied

Hello,

I assume you want to hook that device to a Linux box in addition. Basically that works, as drivers for Linux are existing, nevertheless it requires maybe compilation of your Kernel etc.

So do you think I should take a chance and buy it?

I should have the drivers sources ... and test if they can be compiled for Mipsel arch.

 

[ripblade]

I should have the drivers sources ... and test if they can be compiled for Mipsel arch.

And where can I get the driver sources for you do you can test them?
Or do you have them already or do I just ask the seller to email to me and pass them in to your slef,

 

[angelofsky1980]

And where can I get the driver sources for you do you can test them?
Or do you have them already or do I just ask the seller to email to me and pass them in to your slef,

I think drivers can be downloaded from manufacturer of the USB DVB device.

 

[ripblade]

i did a Goole shearch and i can find any info about the driver for
Mystique SaTiX-S2 Sky USB, HDTV, DiseqC, USALS

if you have any luck let me know this would be a steal at EUR 39.90
opps found this info


root ~ # root ~ # dmesg | grep -i dvb
-sh: root: command not found
[ 4.070564] dvb-usb: found a 'Bestunar US6831 HD' in warm state.
root ~ # [ 4.070564] dvb-usb: found a 'Bestunar US6831 HD' in warm state.
-sh: [: missing `]'
<-usb: will pass the complete MPEG2 transport stream <-usb: will pass the complete MPEG2 transport stream to the software demuxer.
-sh: [: missing `]'
[ 4.394305] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.7/usb1/1-4/inroot ~ # root ~ # [ 4.071060] DVB: registering new adapter (Bestunar US6831 HD)
-sh: syntax error near unexpected token `('
root ~ # [ 4.078585] dvb-usb: MAC address: ff:ff:ff:ff:ff:ff
-sh: [: missing `]'
<-usb: no frontend was attached by 'Bestunar US6831 <-usb: no frontend was attached by 'Bestunar US6831 HD'
-sh: [: missing `]'
<ut: IR-receiver inside an USB DVB receiver as /devi <USB DVB receiver as /devices/pci0000:00/0000:00:1d.7/usb1/1-4/input/input7
-sh: [: missing `]'
root ~ # [ 4.394486] dvb-usb: schedule remote query interval to 150 msecs.
-sh: [: missing `]'
<-usb: Bestunar US6831 HD successfully initialized a <-usb: Bestunar US6831 HD successfully initialized and connected.

 

[ripblade]

Found this have a look when you can

 

[angelofsky1980]

Found this have a look when you can

Could you please post a full "dmesg" output ?

Little update: some people @ LinuxTV.org website are working to support this kind of devices
I don't know the state-of-the-art but I will verify shortly if there is the possibility to use it on our boxes.

 

[ripblade]

Thanks for your replays, but I don't know what a dmesg" output is only the file I uploaded by doneing a lot of google shearchs

 

[ripblade]

dmesg" output
Aug 17 08:33:19 openelec syslog.info syslogd started: BusyBox v1.20.2
Aug 17 08:33:19 openelec user.notice Boot: ### Starting Kernellog daemon ###
Aug 17 08:33:19 openelec user.notice kernel: klogd started: BusyBox v1.20.2 (2012-08-08 21:52:20 CEST)
Aug 17 08:33:19 openelec user.info kernel: [ 0.000000] Initializing cgroup subsys cpuset
Aug 17 08:33:19 openelec user.info kernel: [ 0.000000] Initializing cgroup subsys cpu
Aug 17 08:33:19 openelec user.notice kernel: [ 0.000000] Linux version 3.2.26 (jetstream@1801-lin007) (gcc version 4.7.1 (GCC) ) #1 SMP Sun Aug 12 00:46:20 CEST 2012
Aug 17 08:33:19 openelec user.info kernel: [ 0.000000] Command line: boot=LABEL=System disk=LABEL=Storage ssh quiet BOOT_IMAGE=/KERNEL
Aug 17 08:33:19 openelec user.info kernel: [ 0.000000] KERNEL supported cpus:
Aug 17 08:33:19 openelec user.info kernel: [ 0.000000] Intel GenuineIntel
Aug 17 08:33:19 openelec user.info kernel: [ 0.000000] BIOS-provided physical RAM map:
Aug 17 08:33:19 openelec user.info kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
Aug 17 08:33:19 openelec user.info kernel: [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
Aug 17 08:33:19 openelec user.info kernel: [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
Aug 17 08:33:19 openelec user.info kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 000000007ffa0000 (usable)
Aug 17 08:33:19 openelec user.info kernel: [ 0.000000] BIOS-e820: 000000007ffa0000 - 000000007ffae000 (ACPI data)
Aug 17 08:33:19 openelec user.info kernel: [ 0.000000] BIOS-e820: 000000007ffae000 - 000000007ffe0000 (ACPI NVS)
Aug 17 08:33:19 openelec user.info kernel: [ 0.000000] BIOS-e820: 000000007ffe0000 - 0000000080000000 (reserved)
Aug 17 08:33:19 openelec user.info kernel: [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
Aug 17 08:33:19 openelec user.info kernel: [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
Aug 17 08:33:19 openelec user.info kernel: [ 0.000000] NX (Execute Disable) protection: active
Aug 17 08:33:19 openelec user.info kernel: [ 0.000000] DMI present.
Aug 17 08:33:19 openelec user.debug kernel: [ 0.000000] DMI: ASUSTeK Computer INC. EB1501P/EB1501P, BIOS 0601 02/03/2012
Aug 17 08:33:19 openelec user.debug kernel: [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
Aug 17 08:33:19 openelec user.debug kernel: [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
Aug 17 08:33:19 openelec user.info kernel: [ 0.000000] last_pfn = 0x7ffa0 max_arch_pfn = 0x400000000
Aug 17 08:33:19 openelec user.debug kernel: [ 0.000000] MTRR default type: uncachable
Aug 17 08:33:19 openelec user.debug kernel: [ 0.000000] MTRR fixed ranges enabled:
Aug 17 08:33:19 openelec user.debug kernel: [ 0.000000] 00000-9FFFF write-back
Aug 17 08:33:19 openelec user.debug kernel: [ 0.000000] A0000-BFFFF uncachable
Aug 17 08:33:19 openelec user.debug kernel: [ 0.000000] C0000-CFFFF write-protect
Aug 17 08:33:19 openelec user.debug kernel: [ 0.000000] D0000-DFFFF uncachable
Aug 17 08:33:19 openelec user.debug kernel: [ 0.000000] E0000-EFFFF write-through
Aug 17 08:33:19 openelec user.debug kernel: [ 0.000000] F0000-FFFFF write-protect
Aug 17 08:33:19 openelec user.debug kernel: [ 0.000000] MTRR variable ranges enabled:
Aug 17 08:33:19 openelec user.debug kernel: [ 0.000000] 0 base 000000000 mask F80000000 write-back
Aug 17 08:33:19 openelec user.debug kernel: [ 0.000000] 1 disabled
Aug 17 08:33:19 openelec user.debug kernel: [ 0.000000] 2 disabled
Aug 17 08:33:19 openelec user.debug kernel: [ 0.000000] 3 disabled
Aug 17 08:33:19 openelec user.debug kernel: [ 0.000000] 4 disabled
Aug 17 08:33:19 openelec user.debug kernel: [ 0.000000] 5 disabled
Aug 17 08:33:19 openelec user.debug kernel: [ 0.000000] 6 disabled
Aug 17 08:33:19 openelec user.debug kernel: [ 0.000000] 7 disabled
Aug 17 08:33:19 openelec user.info kernel: [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Aug 17 08:33:19 openelec user.info kernel: [ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
Aug 17 08:33:19 openelec user.debug kernel: [ 0.000000] initial memory mapped : 0 - 20000000
Aug 17 08:33:19 openelec user.debug kernel: [ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
Aug 17 08:33:19 openelec user.info kernel: [ 0.000000] init_memory_mapping: 0000000000000000-000000007ffa0000
Aug 17 08:33:19 openelec user.debug kernel: [ 0.000000] 0000000000 - 007fe00000 page 2M
Aug 17 08:33:19 openelec user.debug kernel: [ 0.000000] 007fe00000 - 007ffa0000 page 4k
Aug 17 08:33:19 openelec user.debug kernel: [ 0.000000] kernel direct mapping tables up to 7ffa0000 @ 1fffc000-20000000
Aug 17 08:33:19 openelec user.warn kernel: [ 0.000000] ACPI: RSDP 00000000000fbb70 00024 (v02 ACPIAM)
Aug 17 08:33:19 openelec user.warn kernel: [ 0.000000] ACPI: XSDT 000000007ffa0100 0004C (v01 020312 XSDT1608 20120203 MSFT 00000097)
Aug 17 08:33:19 openelec user.warn kernel: [ 0.000000] ACPI: FACP 000000007ffa0290 000F4 (v03 020312 FACP1608 20120203 MSFT 00000097)
Aug 17 08:33:19 openelec user.warn kernel: [ 0.000000] ACPI: DSDT 000000007ffa0440 05D1C (v01 A1654 A1654000 00000000 INTL 20060113)
Aug 17 08:33:19 openelec user.warn kernel: [ 0.000000] ACPI: FACS 000000007ffae000 00040
Aug 17 08:33:19 openelec user.warn kernel: [ 0.000000] ACPI: APIC 000000007ffa0390 0006C (v01 020312 APIC1608 20120203 MSFT 00000097)
Aug 17 08:33:19 openelec user.warn kernel: [ 0.000000] ACPI: MCFG 000000007ffa0400 0003C (v01 020312 OEMMCFG 20120203 MSFT 00000097)
Aug 17 08:33:19 openelec user.warn kernel: [ 0.000000] ACPI: OEMB 000000007ffae040 00072 (v01 020312 OEMB1608 20120203 MSFT 00000097)
Aug 17 08:33:19 openelec user.warn kernel: [ 0.000000] ACPI: HPET 000000007ffaa440 00038 (v01 020312 OEMHPET 20120203 MSFT 00000097)
Aug 17 08:33:19 openelec user.debug kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000
Aug 17 08:33:19 openelec user.debug kernel: [ 0.000000] [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff88007d600000-ffff88007f1fffff] on node 0
Aug 17 08:33:19 openelec user.warn kernel: [ 0.000000] Zone PFN ranges:
Aug 17 08:33:19 openelec user.warn kernel: [ 0.000000] DMA 0x00000010 -> 0x00001000
Aug 17 08:33:19 openelec user.warn kernel: [ 0.000000] DMA32 0x00001000 -> 0x00100000
Aug 17 08:33:19 openelec user.warn kernel: [ 0.000000] Normal empty
Aug 17 08:33:19 openelec user.warn kernel: [ 0.000000] Movable zone start PFN for each node
Aug 17 08:33:19 openelec user.warn kernel: [ 0.000000] early_node_map[2] active PFN ranges
Aug 17 08:33:19 openelec user.warn kernel: [ 0.000000] 0: 0x00000010 -> 0x0000009f
Aug 17 08:33:19 openelec user.warn kernel: [ 0.000000] 0: 0x00000100 -> 0x0007ffa0
Aug 17 08:33:19 openelec user.debug kernel: [ 0.000000] On node 0 totalpages: 524079
Aug 17 08:33:19 openelec user.debug kernel: [ 0.000000] DMA zone: 56 pages used for memmap
Aug 17 08:33:19 openelec user.debug kernel: [ 0.000000] DMA zone: 5 pages reserved
Aug 17 08:33:19 openelec user.debug kernel: [ 0.000000] DMA zone: 3922 pages, LIFO batch:0
Aug 17 08:33:19 openelec user.debug kernel: [ 0.000000] DMA32 zone: 7111 pages used for memmap
Aug 17 08:33:19 openelec user.debug kernel: [ 0.000000] DMA32 zone: 512985 pages, LIFO batch:31
Aug 17 08:33:19 openelec user.info kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x808
Aug 17 08:33:19 openelec user.debug kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000
Aug 17 08:33:19 openelec user.info kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Aug 17 08:33:19 openelec user.info kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
Aug 17 08:33:19 openelec user.info kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
Aug 17 08:33:19 openelec user.info kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
Aug 17 08:33:19 openelec user.info kernel: [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
Aug 17 08:33:19 openelec user.info kernel: [ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
Aug 17 08:33:19 openelec user.info kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Aug 17 08:33:19 openelec user.info kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Aug 17 08:33:19 openelec user.debug kernel: [ 0.000000] ACPI: IRQ0 used by override.
Aug 17 08:33:19 openelec user.debug kernel: [ 0.000000] ACPI: IRQ2 used by override.
Aug 17 08:33:19 openelec user.debug kernel: [ 0.000000] ACPI: IRQ9 used by override.
Aug 17 08:33:19 openelec user.info kernel: [ 0.000000] Using ACPI (MADT) for SMP configuration information
Aug 17 08:33:19 openelec user.info kernel: [ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000
Aug 17 08:33:19 openelec user.info kernel: [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
Aug 17 08:33:19 openelec user.debug kernel: [ 0.000000] nr_irqs_gsi: 40
Aug 17 08:33:19 openelec user.info kernel: [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:7ee00000)
Aug 17 08:33:19 openelec user.info kernel: [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
Aug 17 08:33:19 openelec user.info kernel: [ 0.000000] PERCPU: Embedded 25 pages/cpu @ffff88007fc00000 s70208 r8192 d24000 u524288
Aug 17 08:33:19 openelec user.debug kernel: [ 0.000000] pcpu-alloc: s70208 r8192 d24000 u524288 alloc=1*2097152
Aug 17 08:33:19 openelec user.debug kernel: [ 0.000000] pcpu-alloc: [0] 0 1 2 3
Aug 17 08:33:19 openelec user.warn kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 516907
Aug 17 08:33:19 openelec user.notice kernel: [ 0.000000] Kernel command line: fastboot root=/dev/ram0 rdinit=/init threadirqs boot=LABEL=System disk=LABEL=Storage ssh quiet BOOT_IMAGE=/KERNEL
Aug 17 08:33:19 openelec user.info kernel: [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
Aug 17 08:33:19 openelec user.info kernel: [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Aug 17 08:33:19 openelec user.info kernel: [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Aug 17 08:33:19 openelec user.info kernel: [ 0.000000] Memory: 2050600k/2096768k available (4702k kernel code, 452k absent, 45716k reserved, 3938k data, 4364k init)
Aug 17 08:33:19 openelec user.info kernel: [ 0.000000] Hierarchical RCU implementation.
Aug 17 08:33:19 openelec user.info kernel: [ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 32
Aug 17 08:33:19 openelec user.info kernel: [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
Aug 17 08:33:19 openelec user.info kernel: [ 0.000000] NR_IRQS:4352 nr_irqs:712 16
Aug 17 08:33:19 openelec user.info kernel: [ 0.000000] Extended CMOS year: 2000
Aug 17 08:33:19 openelec user.info kernel: [ 0.000000] Console: colour VGA+ 80x25
Aug 17 08:33:19 openelec user.info kernel: [ 0.000000] console [tty0] enabled
Aug 17 08:33:19 openelec user.debug kernel: [ 0.000000] hpet clockevent registered
Aug 17 08:33:19 openelec user.warn kernel: [ 0.000000] Fast TSC calibration using PIT
Aug 17 08:33:19 openelec user.warn kernel: [ 0.000000] Detected 1795.612 MHz processor.
Aug 17 08:33:19 openelec user.info kernel: [ 0.003339] Calibrating delay loop (skipped), value calculated using timer frequency.. 3592.85 BogoMIPS (lpj=5985373)
Aug 17 08:33:19 openelec user.info kernel: [ 0.003348] pid_max: default: 32768 minimum: 301
Aug 17 08:33:19 openelec user.info kernel: [ 0.003468] Mount-cache hash table entries: 256
Aug 17 08:33:19 openelec user.info kernel: [ 0.003678] Initializing cgroup subsys cpuacct
Aug 17 08:33:19 openelec user.info kernel: [ 0.003689] Initializing cgroup subsys freezer
Aug 17 08:33:19 openelec user.info kernel: [ 0.003721] CPU: Physical Processor ID: 0
Aug 17 08:33:19 openelec user.info kernel: [ 0.003725] CPU: Processor Core ID: 0
Aug 17 08:33:19 openelec user.info kernel: [ 0.003729] using mwait in idle threads.
Aug 17 08:33:19 openelec user.info kernel: [ 0.003771] ACPI: Core revision 20111123
Aug 17 08:33:19 openelec user.info kernel: [ 0.013804] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
Aug 17 08:33:19 openelec user.info kernel: [ 0.049017] CPU0: Intel(R) Atom(TM) CPU D525 @ 1.80GHz stepping 0a
Aug 17 08:33:19 openelec user.info kernel: [ 0.049997] Performance Events: PEBS fmt0+, Atom events, Intel PMU driver.
Aug 17 08:33:19 openelec user.info kernel: [ 0.049997] ... version: 3
Aug 17 08:33:19 openelec user.info kernel: [ 0.049997] ... bit width: 40
Aug 17 08:33:19 openelec user.info kernel: [ 0.049997] ... generic registers: 2
Aug 17 08:33:19 openelec user.info kernel: [ 0.049997] ... value mask: 000000ffffffffff
Aug 17 08:33:19 openelec user.info kernel: [ 0.049997] ... max period: 000000007fffffff
Aug 17 08:33:19 openelec user.info kernel: [ 0.049997] ... fixed-purpose events: 3
Aug 17 08:33:19 openelec user.info kernel: [ 0.049997] ... event mask: 0000000700000003
Aug 17 08:33:19 openelec user.info kernel: [ 0.049997] Booting Node 0, Processors #1
Aug 17 08:33:19 openelec user.debug kernel: [ 0.049997] smpboot cpu 1: start_ip = 9a000
Aug 17 08:33:19 openelec user.notice kernel: [ 0.006666] calibrate_delay_direct() dropping min bogoMips estimate 3 = 4346079
Aug 17 08:33:19 openelec user.info kernel: [ 0.006666] Disabled fast string operations
Aug 17 08:33:19 openelec user.warn kernel: [ 0.143526] #2
Aug 17 08:33:19 openelec user.debug kernel: [ 0.143531] smpboot cpu 2: start_ip = 9a000
Aug 17 08:33:19 openelec user.info kernel: [ 0.006666] Disabled fast string operations
Aug 17 08:33:19 openelec user.warn kernel: [ 0.240224] #3 Ok.
Aug 17 08:33:19 openelec user.debug kernel: [ 0.240228] smpboot cpu 3: start_ip = 9a000
Aug 17 08:33:19 openelec user.info kernel: [ 0.006666] Disabled fast string operations
Aug 17 08:33:19 openelec user.info kernel: [ 0.336666] Brought up 4 CPUs
Aug 17 08:33:19 openelec user.info kernel: [ 0.336673] Total of 4 processors activated (14370.99 BogoMIPS).
Aug 17 08:33:19 openelec user.info kernel: [ 0.337747] devtmpfs: initialized
Aug 17 08:33:19 openelec user.info kernel: [ 0.337747] NET: Registered protocol family 16
Aug 17 08:33:19 openelec user.info kernel: [ 0.337747] ACPI: bus type pci registered
Aug 17 08:33:19 openelec user.info kernel: [ 0.337747] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
Aug 17 08:33:19 openelec user.info kernel: [ 0.337747] PCI: not using MMCONFIG
Aug 17 08:33:19 openelec user.info kernel: [ 0.337747] PCI: Using configuration type 1 for base access
Aug 17 08:33:19 openelec user.info kernel: [ 0.341806] bio: create slab <bio-0> at 0
Aug 17 08:33:19 openelec user.info kernel: [ 0.341806] ACPI: Added _OSI(Module Device)
Aug 17 08:33:19 openelec user.info kernel: [ 0.341806] ACPI: Added _OSI(Processor Device)
Aug 17 08:33:19 openelec user.info kernel: [ 0.341806] ACPI: Added _OSI(3.0 _SCP Extensions)
Aug 17 08:33:19 openelec user.info kernel: [ 0.341806] ACPI: Added _OSI(Processor Aggregator Device)
Aug 17 08:33:19 openelec user.debug kernel: [ 0.344486] ACPI: EC: Look up EC in DSDT
Aug 17 08:33:19 openelec user.warn kernel: [ 0.347005] ACPI: Executed 1 blocks of module-level executable AML code
Aug 17 08:33:19 openelec user.info kernel: [ 0.352261] ACPI: Interpreter enabled
Aug 17 08:33:19 openelec user.info kernel: [ 0.352272] ACPI: (supports S0 S1 S3 S5)
Aug 17 08:33:19 openelec user.info kernel: [ 0.352316] ACPI: Using IOAPIC for interrupt routing
Aug 17 08:33:19 openelec user.info kernel: [ 0.352383] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
Aug 17 08:33:19 openelec user.info kernel: [ 0.354231] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
Aug 17 08:33:19 openelec user.info kernel: [ 0.401034] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
Aug 17 08:33:19 openelec user.info kernel: [ 0.401252] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
Aug 17 08:33:19 openelec user.info kernel: [ 0.401686] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
Aug 17 08:33:19 openelec user.info kernel: [ 0.401693] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
Aug 17 08:33:19 openelec user.info kernel: [ 0.401699] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
Aug 17 08:33:19 openelec user.info kernel: [ 0.401705] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
Aug 17 08:33:19 openelec user.info kernel: [ 0.401711] pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xdfffffff]
Aug 17 08:33:19 openelec user.info kernel: [ 0.401717] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfed8ffff]
Aug 17 08:33:19 openelec user.debug kernel: [ 0.401743] pci 0000:00:00.0: [8086:a000] type 0 class 0x000600
Aug 17 08:33:19 openelec user.debug kernel: [ 0.401821] pci 0000:00:1b.0: [8086:27d8] type 0 class 0x000403
Aug 17 08:33:19 openelec user.debug kernel: [ 0.401840] pci 0000:00:1b.0: reg 10: [mem 0xf9ff8000-0xf9ffbfff 64bit]
Aug 17 08:33:19 openelec user.debug kernel: [ 0.401910] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
Aug 17 08:33:19 openelec user.debug kernel: [ 0.401917] pci 0000:00:1b.0: PME# disabled
Aug 17 08:33:19 openelec user.debug kernel: [ 0.401942] pci 0000:00:1c.0: [8086:27d0] type 1 class 0x000604
Aug 17 08:33:19 openelec user.debug kernel: [ 0.402013] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
Aug 17 08:33:19 openelec user.debug kernel: [ 0.402020] pci 0000:00:1c.0: PME# disabled
Aug 17 08:33:19 openelec user.debug kernel: [ 0.402044] pci 0000:00:1c.1: [8086:27d2] type 1 class 0x000604
Aug 17 08:33:19 openelec user.debug kernel: [ 0.402114] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
Aug 17 08:33:19 openelec user.debug kernel: [ 0.402120] pci 0000:00:1c.1: PME# disabled
Aug 17 08:33:19 openelec user.debug kernel: [ 0.402147] pci 0000:00:1c.2: [8086:27d4] type 1 class 0x000604
Aug 17 08:33:19 openelec user.debug kernel: [ 0.402216] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
Aug 17 08:33:19 openelec user.debug kernel: [ 0.402223] pci 0000:00:1c.2: PME# disabled
Aug 17 08:33:19 openelec user.debug kernel: [ 0.402247] pci 0000:00:1c.3: [8086:27d6] type 1 class 0x000604
Aug 17 08:33:19 openelec user.debug kernel: [ 0.402317] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
Aug 17 08:33:19 openelec user.debug kernel: [ 0.402323] pci 0000:00:1c.3: PME# disabled
Aug 17 08:33:19 openelec user.debug kernel: [ 0.402350] pci 0000:00:1d.0: [8086:27c8] type 0 class 0x000c03
Aug 17 08:33:19 openelec user.debug kernel: [ 0.402392] pci 0000:00:1d.0: reg 20: [io 0xb880-0xb89f]
Aug 17 08:33:19 openelec user.debug kernel: [ 0.402429] pci 0000:00:1d.1: [8086:27c9] type 0 class 0x000c03
Aug 17 08:33:19 openelec user.debug kernel: [ 0.402470] pci 0000:00:1d.1: reg 20: [io 0xbc00-0xbc1f]
Aug 17 08:33:19 openelec user.debug kernel: [ 0.402508] pci 0000:00:1d.2: [8086:27ca] type 0 class 0x000c03
Aug 17 08:33:19 openelec user.debug kernel: [ 0.402550] pci 0000:00:1d.2: reg 20: [io 0xc000-0xc01f]
Aug 17 08:33:19 openelec user.debug kernel: [ 0.402587] pci 0000:00:1d.3: [8086:27cb] type 0 class 0x000c03
Aug 17 08:33:19 openelec user.debug kernel: [ 0.402627] pci 0000:00:1d.3: reg 20: [io 0xc080-0xc09f]
Aug 17 08:33:19 openelec user.debug kernel: [ 0.402674] pci 0000:00:1d.7: [8086:27cc] type 0 class 0x000c03
Aug 17 08:33:19 openelec user.debug kernel: [ 0.402696] pci 0000:00:1d.7: reg 10: [mem 0xf9fff800-0xf9fffbff]
Aug 17 08:33:19 openelec user.debug kernel: [ 0.402777] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
Aug 17 08:33:19 openelec user.debug kernel: [ 0.402784] pci 0000:00:1d.7: PME# disabled
Aug 17 08:33:19 openelec user.debug kernel: [ 0.402806] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
Aug 17 08:33:19 openelec user.debug kernel: [ 0.402874] pci 0000:00:1f.0: [8086:27bc] type 0 class 0x000601
Aug 17 08:33:19 openelec user.info kernel: [ 0.402951] pci 0000:00:1f.0: [Firmware Bug]: TigerPoint LPC.BM_STS cleared
Aug 17 08:33:19 openelec user.debug kernel: [ 0.403002] pci 0000:00:1f.2: [8086:27c1] type 0 class 0x000106
Aug 17 08:33:19 openelec user.debug kernel: [ 0.403021] pci 0000:00:1f.2: reg 10: [io 0xcc00-0xcc07]
Aug 17 08:33:19 openelec user.debug kernel: [ 0.403032] pci 0000:00:1f.2: reg 14: [io 0xc880-0xc883]
Aug 17 08:33:19 openelec user.debug kernel: [ 0.403043] pci 0000:00:1f.2: reg 18: [io 0xc800-0xc807]
Aug 17 08:33:19 openelec user.debug kernel: [ 0.403054] pci 0000:00:1f.2: reg 1c: [io 0xc480-0xc483]
Aug 17 08:33:19 openelec user.debug kernel: [ 0.403065] pci 0000:00:1f.2: reg 20: [io 0xc400-0xc41f]
Aug 17 08:33:19 openelec user.debug kernel: [ 0.403076] pci 0000:00:1f.2: reg 24: [mem 0xf9fffc00-0xf9ffffff]
Aug 17 08:33:19 openelec user.debug kernel: [ 0.403119] pci 0000:00:1f.2: PME# supported from D3hot
Aug 17 08:33:19 openelec user.debug kernel: [ 0.403125] pci 0000:00:1f.2: PME# disabled
Aug 17 08:33:19 openelec user.debug kernel: [ 0.403148] pci 0000:00:1f.3: [8086:27da] type 0 class 0x000c05
Aug 17 08:33:19 openelec user.debug kernel: [ 0.403200] pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f]
Aug 17 08:33:19 openelec user.debug kernel: [ 0.403317] pci 0000:05:00.0: [1033:0194] type 0 class 0x000c03
Aug 17 08:33:19 openelec user.debug kernel: [ 0.403348] pci 0000:05:00.0: reg 10: [mem 0xfbffe000-0xfbffffff 64bit]
Aug 17 08:33:19 openelec user.debug kernel: [ 0.403491] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
Aug 17 08:33:19 openelec user.debug kernel: [ 0.403500] pci 0000:05:00.0: PME# disabled
Aug 17 08:33:19 openelec user.info kernel: [ 0.409993] pci 0000:00:1c.0: PCI bridge to [bus 05-05]
Aug 17 08:33:19 openelec user.debug kernel: [ 0.410003] pci 0000:00:1c.0: bridge window [mem 0xfbf00000-0xfbffffff]
Aug 17 08:33:19 openelec user.debug kernel: [ 0.410031] pci 0000:04:00.0: [10ec:8168] type 0 class 0x000200
Aug 17 08:33:19 openelec user.debug kernel: [ 0.410052] pci 0000:04:00.0: reg 10: [io 0xe800-0xe8ff]
Aug 17 08:33:19 openelec user.debug kernel: [ 0.410083] pci 0000:04:00.0: reg 18: [mem 0xf8fff000-0xf8ffffff 64bit pref]
Aug 17 08:33:19 openelec user.debug kernel: [ 0.410104] pci 0000:04:00.0: reg 20: [mem 0xf8ff8000-0xf8ffbfff 64bit pref]
Aug 17 08:33:19 openelec user.debug kernel: [ 0.410182] pci 0000:04:00.0: supports D1 D2
Aug 17 08:33:19 openelec user.debug kernel: [ 0.410187] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
Aug 17 08:33:19 openelec user.debug kernel: [ 0.410195] pci 0000:04:00.0: PME# disabled
Aug 17 08:33:19 openelec user.info kernel: [ 0.416715] pci 0000:00:1c.1: PCI bridge to [bus 04-04]
Aug 17 08:33:19 openelec user.debug kernel: [ 0.416715] pci 0000:00:1c.1: bridge window [io 0xe000-0xefff]
Aug 17 08:33:19 openelec user.debug kernel: [ 0.416715] pci 0000:00:1c.1: bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref]
Aug 17 08:33:19 openelec user.debug kernel: [ 0.416743] pci 0000:03:00.0: [168c:002b] type 0 class 0x000280
Aug 17 08:33:19 openelec user.debug kernel: [ 0.416769] pci 0000:03:00.0: reg 10: [mem 0xfbee0000-0xfbeeffff 64bit]
Aug 17 08:33:19 openelec user.debug kernel: [ 0.416875] pci 0000:03:00.0: supports D1
Aug 17 08:33:19 openelec user.debug kernel: [ 0.416880] pci 0000:03:00.0: PME# supported from D0 D1 D3hot D3cold
Aug 17 08:33:19 openelec user.debug kernel: [ 0.416888] pci 0000:03:00.0: PME# disabled
Aug 17 08:33:19 openelec user.info kernel: [ 0.423322] pci 0000:00:1c.2: PCI bridge to [bus 03-03]
Aug 17 08:33:19 openelec user.debug kernel: [ 0.423331] pci 0000:00:1c.2: bridge window [mem 0xfbe00000-0xfbefffff]
Aug 17 08:33:19 openelec user.debug kernel: [ 0.423347] pci 0000:02:00.0: [10de:0a64] type 0 class 0x000300
Aug 17 08:33:19 openelec user.debug kernel: [ 0.423367] pci 0000:02:00.0: reg 10: [mem 0xfa000000-0xfaffffff]
Aug 17 08:33:19 openelec user.debug kernel: [ 0.423387] pci 0000:02:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
Aug 17 08:33:19 openelec user.debug kernel: [ 0.423407] pci 0000:02:00.0: reg 1c: [mem 0xce000000-0xcfffffff 64bit pref]
Aug 17 08:33:19 openelec user.debug kernel: [ 0.423422] pci 0000:02:00.0: reg 24: [io 0xdc00-0xdc7f]
Aug 17 08:33:19 openelec user.debug kernel: [ 0.423436] pci 0000:02:00.0: reg 30: [mem 0xfbd00000-0xfbd7ffff pref]
Aug 17 08:33:19 openelec user.debug kernel: [ 0.423534] pci 0000:02:00.1: [10de:0be3] type 0 class 0x000403
Aug 17 08:33:19 openelec user.debug kernel: [ 0.423552] pci 0000:02:00.1: reg 10: [mem 0xfbdfc000-0xfbdfffff]
Aug 17 08:33:19 openelec user.info kernel: [ 0.430047] pci 0000:00:1c.3: PCI bridge to [bus 02-02]
Aug 17 08:33:19 openelec user.debug kernel: [ 0.430047] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
Aug 17 08:33:19 openelec user.debug kernel: [ 0.430047] pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfbdfffff]
Aug 17 08:33:19 openelec user.debug kernel: [ 0.430047] pci 0000:00:1c.3: bridge window [mem 0xce000000-0xdfffffff 64bit pref]
Aug 17 08:33:19 openelec user.info kernel: [ 0.430085] pci 0000:00:1e.0: PCI bridge to [bus 01-01] (subtractive decode)
Aug 17 08:33:19 openelec user.debug kernel: [ 0.430098] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
Aug 17 08:33:19 openelec user.debug kernel: [ 0.430104] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
Aug 17 08:33:19 openelec user.debug kernel: [ 0.430110] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
Aug 17 08:33:19 openelec user.debug kernel: [ 0.430117] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
Aug 17 08:33:19 openelec user.debug kernel: [ 0.430123] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xdfffffff] (subtractive decode)
Aug 17 08:33:19 openelec user.debug kernel: [ 0.430129] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfed8ffff] (subtractive decode)
Aug 17 08:33:19 openelec user.debug kernel: [ 0.430154] pci_bus 0000:00: on NUMA node 0
Aug 17 08:33:19 openelec user.debug kernel: [ 0.430163] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Aug 17 08:33:19 openelec user.debug kernel: [ 0.430410] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
Aug 17 08:33:19 openelec user.debug kernel: [ 0.430492] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
Aug 17 08:33:19 openelec user.debug kernel: [ 0.430546] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
Aug 17 08:33:19 openelec user.debug kernel: [ 0.430600] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
Aug 17 08:33:19 openelec user.info kernel: [ 0.430712] pci0000:00: Requesting ACPI _OSC control (0x1d)
Aug 17 08:33:19 openelec user.info kernel: [ 0.430720] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
Aug 17 08:33:19 openelec user.info kernel: [ 0.430724] ACPI _OSC control for PCIe not granted, disabling ASPM
Aug 17 08:33:19 openelec user.info kernel: [ 0.443336] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 *15)
Aug 17 08:33:19 openelec user.info kernel: [ 0.443471] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 7 10 11 12 14 15)
Aug 17 08:33:19 openelec user.info kernel: [ 0.443588] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 *11 12 14 15)
Aug 17 08:33:19 openelec user.info kernel: [ 0.443704] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *10 11 12 14 15)
Aug 17 08:33:19 openelec user.info kernel: [ 0.443820] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 *4 5 7 10 11 12 14 15)
Aug 17 08:33:19 openelec user.info kernel: [ 0.443936] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 *7 10 11 12 14 15)
Aug 17 08:33:19 openelec user.info kernel: [ 0.444051] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 7 10 11 12 14 15)
Aug 17 08:33:19 openelec user.info kernel: [ 0.444167] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 *14 15)
Aug 17 08:33:19 openelec user.info kernel: [ 0.444327] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
Aug 17 08:33:19 openelec user.info kernel: [ 0.444327] vgaarb: loaded
Aug 17 08:33:19 openelec user.info kernel: [ 0.444327] vgaarb: bridge control possible 0000:02:00.0
Aug 17 08:33:19 openelec user.notice kernel: [ 0.444327] SCSI subsystem initialized
Aug 17 08:33:19 openelec user.debug kernel: [ 0.444327] libata version 3.00 loaded.
Aug 17 08:33:19 openelec user.info kernel: [ 0.444327] usbcore: registered new interface driver usbfs
Aug 17 08:33:19 openelec user.info kernel: [ 0.444327] usbcore: registered new interface driver hub
Aug 17 08:33:19 openelec user.info kernel: [ 0.444327] usbcore: registered new device driver usb
Aug 17 08:33:19 openelec user.info kernel: [ 0.444327] PCI: Using ACPI for IRQ routing
Aug 17 08:33:19 openelec user.debug kernel: [ 0.450460] PCI: pci_cache_line_size set to 64 bytes
Aug 17 08:33:19 openelec user.debug kernel: [ 0.450565] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
Aug 17 08:33:19 openelec user.debug kernel: [ 0.450571] reserve RAM buffer: 000000007ffa0000 - 000000007fffffff
Aug 17 08:33:19 openelec user.info kernel: [ 0.450867] cfg80211: Calling CRDA to update world regulatory domain
Aug 17 08:33:19 openelec user.info kernel: [ 0.450933] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
Aug 17 08:33:19 openelec user.info kernel: [ 0.460068] Switching to clocksource hpet
Aug 17 08:33:19 openelec user.info kernel: [ 0.460119] pnp: PnP ACPI init
Aug 17 08:33:19 openelec user.info kernel: [ 0.460146] ACPI: bus type pnp registered
Aug 17 08:33:19 openelec user.debug kernel: [ 0.460393] pnp 00:00: [bus 00-ff]
Aug 17 08:33:19 openelec user.debug kernel: [ 0.460400] pnp 00:00: [io 0x0cf8-0x0cff]
Aug 17 08:33:19 openelec user.debug kernel: [ 0.460406] pnp 00:00: [io 0x0000-0x0cf7 window]
Aug 17 08:33:19 openelec user.debug kernel: [ 0.460411] pnp 00:00: [io 0x0d00-0xffff window]
Aug 17 08:33:19 openelec user.debug kernel: [ 0.460417] pnp 00:00: [mem 0x000a0000-0x000bffff window]
Aug 17 08:33:19 openelec user.debug kernel: [ 0.460422] pnp 00:00: [mem 0x000d0000-0x000dffff window]
Aug 17 08:33:19 openelec user.debug kernel: [ 0.460428] pnp 00:00: [mem 0x80000000-0xdfffffff window]
Aug 17 08:33:19 openelec user.debug kernel: [ 0.460433] pnp 00:00: [mem 0xf0000000-0xfed8ffff window]
Aug 17 08:33:19 openelec user.debug kernel: [ 0.460526] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
Aug 17 08:33:19 openelec user.debug kernel: [ 0.460557] pnp 00:01: [mem 0xfed14000-0xfed19fff]
Aug 17 08:33:19 openelec user.debug kernel: [ 0.460563] pnp 00:01: [mem 0xfed90000-0xfed93fff]
Aug 17 08:33:19 openelec user.info kernel: [ 0.460653] system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
Aug 17 08:33:19 openelec user.info kernel: [ 0.460660] system 00:01: [mem 0xfed90000-0xfed93fff] has been reserved
Aug 17 08:33:19 openelec user.debug kernel: [ 0.460668] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
Aug 17 08:33:19 openelec user.debug kernel: [ 0.460744] pnp 00:02: [dma 4]
Aug 17 08:33:19 openelec user.debug kernel: [ 0.460750] pnp 00:02: [io 0x0000-0x000f]
Aug 17 08:33:19 openelec user.debug kernel: [ 0.460755] pnp 00:02: [io 0x0081-0x0083]
Aug 17 08:33:19 openelec user.debug kernel: [ 0.460759] pnp 00:02: [io 0x0087]
Aug 17 08:33:19 openelec user.debug kernel: [ 0.460764] pnp 00:02: [io 0x0089-0x008b]
Aug 17 08:33:19 openelec user.debug kernel: [ 0.460772] pnp 00:02: [io 0x008f]
Aug 17 08:33:19 openelec user.debug kernel: [ 0.460776] pnp 00:02: [io 0x00c0-0x00df]
Aug 17 08:33:19 openelec user.debug kernel: [ 0.460828] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
Aug 17 08:33:19 openelec user.debug kernel: [ 0.460857] pnp 00:03: [io 0x0070-0x0071]
Aug 17 08:33:19 openelec user.debug kernel: [ 0.460874] pnp 00:03: [irq 8]
Aug 17 08:33:19 openelec user.debug kernel: [ 0.460929] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
Aug 17 08:33:19 openelec user.debug kernel: [ 0.460953] pnp 00:04: [io 0x0061]
Aug 17 08:33:19 openelec user.debug kernel: [ 0.461008] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
Aug 17 08:33:19 openelec user.debug kernel: [ 0.461035] pnp 00:05: [io 0x00f0-0x00ff]
Aug 17 08:33:19 openelec user.debug kernel: [ 0.461047] pnp 00:05: [irq 13]
Aug 17 08:33:19 openelec user.debug kernel: [ 0.461102] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
Aug 17 08:33:19 openelec user.debug kernel: [ 0.461520] pnp 00:06: [io 0x0000-0xffffffffffffffff disabled]
Aug 17 08:33:19 openelec user.debug kernel: [ 0.461526] pnp 00:06: [io 0x0a00-0x0a0f]
Aug 17 08:33:19 openelec user.debug kernel: [ 0.461531] pnp 00:06: [io 0x0290-0x029f]
Aug 17 08:33:19 openelec user.debug kernel: [ 0.461536] pnp 00:06: [io 0x0a20-0x0a2f]
Aug 17 08:33:19 openelec user.debug kernel: [ 0.461541] pnp 00:06: [io 0x0a30-0x0a3f]
Aug 17 08:33:19 openelec user.info kernel: [ 0.461632] system 00:06: [io 0x0a00-0x0a0f] has been reserved
Aug 17 08:33:19 openelec user.info kernel: [ 0.461639] system 00:06: [io 0x0290-0x029f] has been reserved
Aug 17 08:33:19 openelec user.info kernel: [ 0.461645] system 00:06: [io 0x0a20-0x0a2f] has been reserved
Aug 17 08:33:19 openelec user.info kernel: [ 0.461651] system 00:06: [io 0x0a30-0x0a3f] has been reserved
Aug 17 08:33:19 openelec user.debug kernel: [ 0.461659] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
Aug 17 08:33:19 openelec user.debug kernel: [ 0.461934] pnp 00:07: [io 0x0010-0x001f]
Aug 17 08:33:19 openelec user.debug kernel: [ 0.461940] pnp 00:07: [io 0x0022-0x003f]
Aug 17 08:33:19 openelec user.debug kernel: [ 0.461945] pnp 00:07: [io 0x0044-0x005f]
Aug 17 08:33:19 openelec user.debug kernel: [ 0.461950] pnp 00:07: [io 0x0062-0x0063]
Aug 17 08:33:19 openelec user.debug kernel: [ 0.461954] pnp 00:07: [io 0x0065-0x006f]
Aug 17 08:33:19 openelec user.debug kernel: [ 0.461959] pnp 00:07: [io 0x0072-0x007f]
Aug 17 08:33:19 openelec user.debug kernel: [ 0.461964] pnp 00:07: [io 0x0080]
Aug 17 08:33:19 openelec user.debug kernel: [ 0.461968] pnp 00:07: [io 0x0084-0x0086]
Aug 17 08:33:19 openelec user.debug kernel: [ 0.461973] pnp 00:07: [io 0x0088]
Aug 17 08:33:19 openelec user.debug kernel: [ 0.461978] pnp 00:07: [io 0x008c-0x008e]
Aug 17 08:33:19 openelec user.debug kernel: [ 0.461982] pnp 00:07: [io 0x0090-0x009f]
Aug 17 08:33:19 openelec user.debug kernel: [ 0.461987] pnp 00:07: [io 0x00a2-0x00bf]
Aug 17 08:33:19 openelec user.debug kernel: [ 0.461992] pnp 00:07: [io 0x00e0-0x00ef]
Aug 17 08:33:19 openelec user.debug kernel: [ 0.461997] pnp 00:07: [io 0x04d0-0x04d1]
Aug 17 08:33:19 openelec user.debug kernel: [ 0.462002] pnp 00:07: [io 0x0800-0x087f]
Aug 17 08:33:19 openelec user.debug kernel: [ 0.462007] pnp 00:07: [io 0x0400-0x03ff disabled]
Aug 17 08:33:19 openelec user.debug kernel: [ 0.462012] pnp 00:07: [io 0x0480-0x04bf]
Aug 17 08:33:19 openelec user.debug kernel: [ 0.462017] pnp 00:07: [mem 0xfed1c000-0xfed1ffff]
Aug 17 08:33:19 openelec user.debug kernel: [ 0.462022] pnp 00:07: [mem 0xfed20000-0xfed8ffff]
Aug 17 08:33:19 openelec user.info kernel: [ 0.462131] system 00:07: [io 0x04d0-0x04d1] has been reserved
Aug 17 08:33:19 openelec user.info kernel: [ 0.462138] system 00:07: [io 0x0800-0x087f] has been reserved
Aug 17 08:33:19 openelec user.info kernel: [ 0.462145] system 00:07: [io 0x0480-0x04bf] has been reserved
Aug 17 08:33:19 openelec user.info kernel: [ 0.462152] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
Aug 17 08:33:19 openelec user.info kernel: [ 0.462159] system 00:07: [mem 0xfed20000-0xfed8ffff] has been reserved
Aug 17 08:33:19 openelec user.debug kernel: [ 0.462166] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
Aug 17 08:33:19 openelec user.debug kernel: [ 0.462333] pnp 00:08: [mem 0xfed00000-0xfed003ff]
Aug 17 08:33:19 openelec user.debug kernel: [ 0.462394] pnp 00:08: Plug and Play ACPI device, IDs PNP0103 (active)
Aug 17 08:33:19 openelec user.debug kernel: [ 0.462612] pnp 00:09: [io 0x0060]
Aug 17 08:33:19 openelec user.debug kernel: [ 0.462618] pnp 00:09: [io 0x0064]
Aug 17 08:33:19 openelec user.debug kernel: [ 0.462623] pnp 00:09: [mem 0xfec00000-0xfec00fff]
Aug 17 08:33:19 openelec user.debug kernel: [ 0.462628] pnp 00:09: [mem 0xfee00000-0xfee00fff]
Aug 17 08:33:19 openelec user.info kernel: [ 0.462718] system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
Aug 17 08:33:19 openelec user.info kernel: [ 0.462725] system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved
Aug 17 08:33:19 openelec user.debug kernel: [ 0.462733] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
Aug 17 08:33:19 openelec user.debug kernel: [ 0.463536] pnp 00:0a: Plug and Play ACPI device, IDs ITE8713 (disabled)
Aug 17 08:33:19 openelec user.debug kernel: [ 0.463712] pnp 00:0b: [mem 0xe0000000-0xefffffff]
Aug 17 08:33:19 openelec user.info kernel: [ 0.463809] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
Aug 17 08:33:19 openelec user.debug kernel: [ 0.463818] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
Aug 17 08:33:19 openelec user.debug kernel: [ 0.464210] pnp 00:0c: [mem 0x00000000-0x0009ffff]
Aug 17 08:33:19 openelec user.debug kernel: [ 0.464217] pnp 00:0c: [mem 0x000c0000-0x000cffff]
Aug 17 08:33:19 openelec user.debug kernel: [ 0.464222] pnp 00:0c: [mem 0x000e0000-0x000fffff]
Aug 17 08:33:19 openelec user.debug kernel: [ 0.464227] pnp 00:0c: [mem 0x00100000-0x7fffffff]
Aug 17 08:33:19 openelec user.debug kernel: [ 0.464232] pnp 00:0c: [mem 0xfed90000-0xffffffff]
Aug 17 08:33:19 openelec user.info kernel: [ 0.464341] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
Aug 17 08:33:19 openelec user.info kernel: [ 0.464348] system 00:0c: [mem 0x000c0000-0x000cffff] could not be reserved
Aug 17 08:33:19 openelec user.info kernel: [ 0.464355] system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved
Aug 17 08:33:19 openelec user.info kernel: [ 0.464362] system 00:0c: [mem 0x00100000-0x7fffffff] could not be reserved
Aug 17 08:33:19 openelec user.info kernel: [ 0.464369] system 00:0c: [mem 0xfed90000-0xffffffff] could not be reserved
Aug 17 08:33:19 openelec user.debug kernel: [ 0.464377] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
Aug 17 08:33:19 openelec user.info kernel: [ 0.464694] pnp: PnP ACPI: found 13 devices
Aug 17 08:33:19 openelec user.info kernel: [ 0.464699] ACPI: ACPI bus type pnp unregistered
Aug 17 08:33:19 openelec user.debug kernel: [ 0.474437] PCI: max bus depth: 1 pci_try_num: 2
Aug 17 08:33:19 openelec user.info kernel: [ 0.474495] pci 0000:00:1c.2: BAR 9: assigned [mem 0x80000000-0x801fffff 64bit pref]
Aug 17 08:33:19 openelec user.info kernel: [ 0.474505] pci 0000:00:1c.2: BAR 7: assigned [io 0x1000-0x1fff]
Aug 17 08:33:19 openelec user.info kernel: [ 0.474513] pci 0000:00:1c.1: BAR 8: assigned [mem 0x80200000-0x805fffff]
Aug 17 08:33:19 openelec user.info kernel: [ 0.474522] pci 0000:00:1c.0: BAR 9: assigned [mem 0x80600000-0x807fffff 64bit pref]
Aug 17 08:33:19 openelec user.info kernel: [ 0.474530] pci 0000:00:1c.0: BAR 7: assigned [io 0x2000-0x2fff]
Aug 17 08:33:19 openelec user.info kernel: [ 0.474537] pci 0000:00:1c.0: PCI bridge to [bus 05-05]
Aug 17 08:33:19 openelec user.info kernel: [ 0.474543] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
Aug 17 08:33:19 openelec user.info kernel: [ 0.474551] pci 0000:00:1c.0: bridge window [mem 0xfbf00000-0xfbffffff]
Aug 17 08:33:19 openelec user.info kernel: [ 0.474559] pci 0000:00:1c.0: bridge window [mem 0x80600000-0x807fffff 64bit pref]
Aug 17 08:33:19 openelec user.info kernel: [ 0.474568] pci 0000:00:1c.1: PCI bridge to [bus 04-04]
Aug 17 08:33:19 openelec user.info kernel: [ 0.474574] pci 0000:00:1c.1: bridge window [io 0xe000-0xefff]
Aug 17 08:33:19 openelec user.info kernel: [ 0.474582] pci 0000:00:1c.1: bridge window [mem 0x80200000-0x805fffff]
Aug 17 08:33:19 openelec user.info kernel: [ 0.474589] pci 0000:00:1c.1: bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref]
Aug 17 08:33:19 openelec user.info kernel: [ 0.474599] pci 0000:00:1c.2: PCI bridge to [bus 03-03]
Aug 17 08:33:19 openelec user.info kernel: [ 0.474605] pci 0000:00:1c.2: bridge window [io 0x1000-0x1fff]
Aug 17 08:33:19 openelec user.info kernel: [ 0.474612] pci 0000:00:1c.2: bridge window [mem 0xfbe00000-0xfbefffff]
Aug 17 08:33:19 openelec user.info kernel: [ 0.474620] pci 0000:00:1c.2: bridge window [mem 0x80000000-0x801fffff 64bit pref]
Aug 17 08:33:19 openelec user.info kernel: [ 0.474630] pci 0000:00:1c.3: PCI bridge to [bus 02-02]
Aug 17 08:33:19 openelec user.info kernel: [ 0.474636] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
Aug 17 08:33:19 openelec user.info kernel: [ 0.474643] pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfbdfffff]
Aug 17 08:33:19 openelec user.info kernel: [ 0.474651] pci 0000:00:1c.3: bridge window [mem 0xce000000-0xdfffffff 64bit pref]
Aug 17 08:33:19 openelec user.info kernel: [ 0.474660] pci 0000:00:1e.0: PCI bridge to [bus 01-01]
Aug 17 08:33:19 openelec user.info kernel: [ 0.474680] pci 0000:00:1c.0: enabling device (0106 -> 0107)
Aug 17 08:33:19 openelec user.info kernel: [ 0.474708] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Aug 17 08:33:19 openelec user.debug kernel: [ 0.474717] pci 0000:00:1c.0: setting latency timer to 64
Aug 17 08:33:19 openelec user.info kernel: [ 0.474736] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Aug 17 08:33:19 openelec user.debug kernel: [ 0.474744] pci 0000:00:1c.1: setting latency timer to 64
Aug 17 08:33:19 openelec user.info kernel: [ 0.474753] pci 0000:00:1c.2: enabling device (0106 -> 0107)
Aug 17 08:33:19 openelec user.info kernel: [ 0.474768] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
Aug 17 08:33:19 openelec user.debug kernel: [ 0.474775] pci 0000:00:1c.2: setting latency timer to 64
Aug 17 08:33:19 openelec user.info kernel: [ 0.474796] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
Aug 17 08:33:19 openelec user.debug kernel: [ 0.474803] pci 0000:00:1c.3: setting latency timer to 64
Aug 17 08:33:19 openelec user.debug kernel: [ 0.474814] pci 0000:00:1e.0: setting latency timer to 64
Aug 17 08:33:19 openelec user.debug kernel: [ 0.474821] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
Aug 17 08:33:19 openelec user.debug kernel: [ 0.474826] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
Aug 17 08:33:19 openelec user.debug kernel: [ 0.474832] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
Aug 17 08:33:19 openelec user.debug kernel: [ 0.474838] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
Aug 17 08:33:19 openelec user.debug kernel: [ 0.474843] pci_bus 0000:00: resource 8 [mem 0x80000000-0xdfffffff]
Aug 17 08:33:19 openelec user.debug kernel: [ 0.474849] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff]
Aug 17 08:33:19 openelec user.debug kernel: [ 0.474855] pci_bus 0000:05: resource 0 [io 0x2000-0x2fff]
Aug 17 08:33:19 openelec user.debug kernel: [ 0.474861] pci_bus 0000:05: resource 1 [mem 0xfbf00000-0xfbffffff]
Aug 17 08:33:19 openelec user.debug kernel: [ 0.474867] pci_bus 0000:05: resource 2 [mem 0x80600000-0x807fffff 64bit pref]
Aug 17 08:33:19 openelec user.debug kernel: [ 0.474873] pci_bus 0000:04: resource 0 [io 0xe000-0xefff]
Aug 17 08:33:19 openelec user.debug kernel: [ 0.474878] pci_bus 0000:04: resource 1 [mem 0x80200000-0x805fffff]
Aug 17 08:33:19 openelec user.debug kernel: [ 0.474884] pci_bus 0000:04: resource 2 [mem 0xf8f00000-0xf8ffffff 64bit pref]
Aug 17 08:33:19 openelec user.debug kernel: [ 0.474890] pci_bus 0000:03: resource 0 [io 0x1000-0x1fff]
Aug 17 08:33:19 openelec user.debug kernel: [ 0.474896] pci_bus 0000:03: resource 1 [mem 0xfbe00000-0xfbefffff]
Aug 17 08:33:19 openelec user.debug kernel: [ 0.474902] pci_bus 0000:03: resource 2 [mem 0x80000000-0x801fffff 64bit pref]
Aug 17 08:33:19 openelec user.debug kernel: [ 0.474908] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
Aug 17 08:33:19 openelec user.debug kernel: [ 0.474913] pci_bus 0000:02: resource 1 [mem 0xfa000000-0xfbdfffff]
Aug 17 08:33:19 openelec user.debug kernel: [ 0.474919] pci_bus 0000:02: resource 2 [mem 0xce000000-0xdfffffff 64bit pref]
Aug 17 08:33:19 openelec user.debug kernel: [ 0.474926] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7]
Aug 17 08:33:19 openelec user.debug kernel: [ 0.474931] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff]
Aug 17 08:33:19 openelec user.debug kernel: [ 0.474937] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
Aug 17 08:33:19 openelec user.debug kernel: [ 0.474942] pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff]
Aug 17 08:33:19 openelec user.debug kernel: [ 0.474948] pci_bus 0000:01: resource 8 [mem 0x80000000-0xdfffffff]
Aug 17 08:33:19 openelec user.debug kernel: [ 0.474954] pci_bus 0000:01: resource 9 [mem 0xf0000000-0xfed8ffff]
Aug 17 08:33:19 openelec user.info kernel: [ 0.475107] NET: Registered protocol family 2
Aug 17 08:33:19 openelec user.info kernel: [ 0.475245] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
Aug 17 08:33:19 openelec user.info kernel: [ 0.475881] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
Aug 17 08:33:19 openelec user.info kernel: [ 0.478498] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
Aug 17 08:33:19 openelec user.info kernel: [ 0.479135] TCP: Hash tables configured (established 262144 bind 65536)
Aug 17 08:33:19 openelec user.info kernel: [ 0.479141] TCP reno registered
Aug 17 08:33:19 openelec user.info kernel: [ 0.479149] UDP hash table entries: 1024 (order: 3, 32768 bytes)
Aug 17 08:33:19 openelec user.info kernel: [ 0.479179] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
Aug 17 08:33:19 openelec user.info kernel: [ 0.479443] NET: Registered protocol family 1
Aug 17 08:33:19 openelec user.info kernel: [ 0.479722] RPC: Registered named UNIX socket transport module.
Aug 17 08:33:19 openelec user.info kernel: [ 0.479727] RPC: Registered udp transport module.
Aug 17 08:33:19 openelec user.info kernel: [ 0.479731] RPC: Registered tcp transport module.
Aug 17 08:33:19 openelec user.info kernel: [ 0.479735] RPC: Registered tcp NFSv4.1 backchannel transport module.
Aug 17 08:33:19 openelec user.info kernel: [ 0.479800] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
Aug 17 08:33:19 openelec user.info kernel: [ 0.479820] pci 0000:00:1d.0: PCI INT A disabled
Aug 17 08:33:19 openelec user.info kernel: [ 0.479843] pci 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
Aug 17 08:33:19 openelec user.info kernel: [ 0.479862] pci 0000:00:1d.1: PCI INT B disabled
Aug 17 08:33:19 openelec user.info kernel: [ 0.479876] pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
Aug 17 08:33:19 openelec user.info kernel: [ 0.479895] pci 0000:00:1d.2: PCI INT C disabled
Aug 17 08:33:19 openelec user.info kernel: [ 0.479916] pci 0000:00:1d.3: PCI INT D -> GSI 22 (level, low) -> IRQ 22
Aug 17 08:33:19 openelec user.info kernel: [ 0.479935] pci 0000:00:1d.3: PCI INT D disabled
Aug 17 08:33:19 openelec user.info kernel: [ 0.479950] pci 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
Aug 17 08:33:19 openelec user.info kernel: [ 0.479986] pci 0000:00:1d.7: PCI INT A disabled
Aug 17 08:33:19 openelec user.info kernel: [ 0.480046] pci 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Aug 17 08:33:19 openelec user.info kernel: [ 0.480078] pci 0000:05:00.0: PCI INT A disabled
Aug 17 08:33:19 openelec user.debug kernel: [ 0.480112] pci 0000:02:00.0: Boot video device
Aug 17 08:33:19 openelec user.debug kernel: [ 0.480133] PCI: CLS 32 bytes, default 64
Aug 17 08:33:19 openelec user.info kernel: [ 0.487568] microcode: CPU0 sig=0x106ca, pf=0x8, revision=0x107
Aug 17 08:33:19 openelec user.info kernel: [ 0.487587] microcode: CPU1 sig=0x106ca, pf=0x8, revision=0x107
Aug 17 08:33:19 openelec user.info kernel: [ 0.487604] microcode: CPU2 sig=0x106ca, pf=0x8, revision=0x107
Aug 17 08:33:19 openelec user.info kernel: [ 0.487623] microcode: CPU3 sig=0x106ca, pf=0x8, revision=0x107
Aug 17 08:33:19 openelec user.info kernel: [ 0.487695] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
Aug 17 08:33:19 openelec user.info kernel: [ 0.489284] squashfs: version 4.0 (2009/01/31) Phillip Lougher
Aug 17 08:33:19 openelec user.info kernel: [ 0.489753] fuse init (API version 7.17)
Aug 17 08:33:19 openelec user.info kernel: [ 0.489924] JFS: nTxBlock = 8192, nTxLock = 65536
Aug 17 08:33:19 openelec user.info kernel: [ 0.494225] SGI XFS with security attributes, large block/inode numbers, no debug enabled
Aug 17 08:33:19 openelec user.info kernel: [ 0.494901] msgmni has been set to 4005
Aug 17 08:33:19 openelec user.info kernel: [ 0.495891] alg: No test for stdrng (krng)
Aug 17 08:33:19 openelec user.info kernel: [ 0.495976] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
Aug 17 08:33:19 openelec user.info kernel: [ 0.495983] io scheduler noop registered
Aug 17 08:33:19 openelec user.info kernel: [ 0.496031] io scheduler cfq registered (default)
Aug 17 08:33:19 openelec user.debug kernel: [ 0.496184] pcieport 0000:00:1c.0: setting latency timer to 64
Aug 17 08:33:19 openelec user.debug kernel: [ 0.496238] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
Aug 17 08:33:19 openelec user.debug kernel: [ 0.496333] pcieport 0000:00:1c.1: setting latency timer to 64
Aug 17 08:33:19 openelec user.debug kernel: [ 0.496376] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
Aug 17 08:33:19 openelec user.debug kernel: [ 0.496457] pcieport 0000:00:1c.2: setting latency timer to 64
Aug 17 08:33:19 openelec user.debug kernel: [ 0.496499] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
Aug 17 08:33:19 openelec user.debug kernel: [ 0.496592] pcieport 0000:00:1c.3: setting latency timer to 64
Aug 17 08:33:19 openelec user.debug kernel: [ 0.496634] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
Aug 17 08:33:19 openelec user.debug kernel: [ 0.496877] intel_idle: MWAIT substates: 0x10
Aug 17 08:33:19 openelec user.debug kernel: [ 0.496896] intel_idle: v0.4 model 0x1C
Aug 17 08:33:19 openelec user.debug kernel: [ 0.496900] intel_idle: lapic_timer_reliable_states 0x2
Aug 17 08:33:19 openelec user.info kernel: [ 0.497117] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
Aug 17 08:33:19 openelec user.info kernel: [ 0.497127] ACPI: Power Button [PWRB]
Aug 17 08:33:19 openelec user.info kernel: [ 0.497259] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
Aug 17 08:33:19 openelec user.info kernel: [ 0.497267] ACPI: Power Button [PWRF]
Aug 17 08:33:19 openelec user.info kernel: [ 0.500792] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
Aug 17 08:33:19 openelec user.info kernel: [ 0.697021] Linux agpgart interface v0.103
Aug 17 08:33:19 openelec user.info kernel: [ 0.700066] brd: module loaded
Aug 17 08:33:19 openelec user.info kernel: [ 0.701629] loop: module loaded
Aug 17 08:33:19 openelec user.info kernel: [ 0.702171] nbd: registered device at major 43
Aug 17 08:33:19 openelec user.info kernel: [ 0.705057] Loading iSCSI transport class v2.0-870.
Aug 17 08:33:19 openelec user.notice kernel: [ 0.705267] iscsi: registered transport (tcp)
Aug 17 08:33:19 openelec user.debug kernel: [ 0.705429] ahci 0000:00:1f.2: version 3.0
Aug 17 08:33:19 openelec user.info kernel: [ 0.705451] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
Aug 17 08:33:19 openelec user.debug kernel: [ 0.705525] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
Aug 17 08:33:19 openelec user.info kernel: [ 0.705604] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
Aug 17 08:33:19 openelec user.info kernel: [ 0.705613] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
Aug 17 08:33:19 openelec user.debug kernel: [ 0.705620] ahci 0000:00:1f.2: setting latency timer to 64
Aug 17 08:33:19 openelec user.info kernel: [ 0.706658] scsi0 : ahci
Aug 17 08:33:19 openelec user.info kernel: [ 0.706942] scsi1 : ahci
Aug 17 08:33:19 openelec user.info kernel: [ 0.707106] scsi2 : ahci
Aug 17 08:33:19 openelec user.info kernel: [ 0.707272] scsi3 : ahci
Aug 17 08:33:19 openelec user.info kernel: [ 0.707578] ata1: SATA max UDMA/133 abar m1024@0xf9fffc00 port 0xf9fffd00 irq 44
Aug 17 08:33:19 openelec user.info kernel: [ 0.707585] ata2: SATA max UDMA/133 abar m1024@0xf9fffc00 port 0xf9fffd80 irq 44
Aug 17 08:33:19 openelec user.info kernel: [ 0.707591] ata3: DUMMY
Aug 17 08:33:19 openelec user.info kernel: [ 0.707594] ata4: DUMMY
Aug 17 08:33:19 openelec user.info kernel: [ 0.707948] tun: Universal TUN/TAP device driver, 1.6
Aug 17 08:33:19 openelec user.info kernel: [ 0.707953] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
Aug 17 08:33:19 openelec user.info kernel: [ 0.708091] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
Aug 17 08:33:19 openelec user.info kernel: [ 0.708096] e100: Copyright(c) 1999-2006 Intel Corporation
Aug 17 08:33:19 openelec user.info kernel: [ 0.708138] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
Aug 17 08:33:19 openelec user.info kernel: [ 0.708143] e1000: Copyright (c) 1999-2006 Intel Corporation.
Aug 17 08:33:19 openelec user.info kernel: [ 0.708184] e1000e: Intel(R) PRO/1000 Network Driver - 1.5.1-k
Aug 17 08:33:19 openelec user.info kernel: [ 0.708188] e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
Aug 17 08:33:19 openelec user.info kernel: [ 0.708264] jme: JMicron JMC2XX ethernet driver version 1.0.8
Aug 17 08:33:19 openelec user.info kernel: [ 0.708377] r8168 Gigabit Ethernet driver 8.029.00-NAPI loaded
Aug 17 08:33:19 openelec user.info kernel: [ 0.708421] r8168 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
Aug 17 08:33:19 openelec user.debug kernel: [ 0.708448] r8168 0000:04:00.0: setting latency timer to 64
Aug 17 08:33:19 openelec user.debug kernel: [ 0.708525] r8168 0000:04:00.0: irq 45 for MSI/MSI-X
Aug 17 08:33:19 openelec user.info kernel: [ 0.708758] eth%d: RTL8168E/8111E at 0xffffc9000001e000, c8:60:00:42:a5:57, IRQ 45
Aug 17 08:33:19 openelec user.info kernel: [ 0.852818] r8168: This product is covered by one or more of the following patents: US5,307,459, US5,434,872, US5,732,094, US6,570,884, US6,115,776, and US6,327,625.
Aug 17 08:33:19 openelec user.debug kernel: [ 0.852825] eth0: Identified chip type is 'RTL8168E/8111E'.
Aug 17 08:33:19 openelec user.warn kernel: [ 0.852831] r8168 Copyright (C) 2012 Realtek NIC software team <nicfae@realtek.com>
Aug 17 08:33:19 openelec user.warn kernel: [ 0.852834] This program comes with ABSOLUTELY NO WARRANTY; for details, please see <http://www.gnu.org/licenses/>.
Aug 17 08:33:19 openelec user.warn kernel: [ 0.852837] This is free software, and you are welcome to redistribute it under certain conditions; see <http://www.gnu.org/licenses/>.
Aug 17 08:33:19 openelec user.info kernel: [ 0.852901] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Aug 17 08:33:19 openelec user.info kernel: [ 0.852940] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
Aug 17 08:33:19 openelec user.debug kernel: [ 0.852965] ehci_hcd 0000:00:1d.7: setting latency timer to 64
Aug 17 08:33:19 openelec user.info kernel: [ 0.852971] ehci_hcd 0000:00:1d.7: EHCI Host Controller
Aug 17 08:33:19 openelec user.info kernel: [ 0.852985] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
Aug 17 08:33:19 openelec user.info kernel: [ 0.853027] ehci_hcd 0000:00:1d.7: using broken periodic workaround
Aug 17 08:33:19 openelec user.info kernel: [ 0.853041] ehci_hcd 0000:00:1d.7: debug port 1
Aug 17 08:33:19 openelec user.debug kernel: [ 0.856925] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
Aug 17 08:33:19 openelec user.info kernel: [ 0.857053] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf9fff800
Aug 17 08:33:19 openelec user.info kernel: [ 0.870033] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
Aug 17 08:33:19 openelec user.info kernel: [ 0.870323] hub 1-0:1.0: USB hub found
Aug 17 08:33:19 openelec user.info kernel: [ 0.870334] hub 1-0:1.0: 8 ports detected
Aug 17 08:33:19 openelec user.info kernel: [ 0.870505] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Aug 17 08:33:19 openelec user.info kernel: [ 0.870539] uhci_hcd: USB Universal Host Controller Interface driver
Aug 17 08:33:19 openelec user.info kernel: [ 0.870613] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
Aug 17 08:33:19 openelec user.debug kernel: [ 0.870627] uhci_hcd 0000:00:1d.0: setting latency timer to 64
Aug 17 08:33:19 openelec user.info kernel: [ 0.870633] uhci_hcd 0000:00:1d.0: UHCI Host Controller
Aug 17 08:33:19 openelec user.info kernel: [ 0.870646] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
Aug 17 08:33:19 openelec user.info kernel: [ 0.870754] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b880
Aug 17 08:33:19 openelec user.info kernel: [ 0.871050] hub 2-0:1.0: USB hub found
Aug 17 08:33:19 openelec user.info kernel: [ 0.871060] hub 2-0:1.0: 2 ports detected
Aug 17 08:33:19 openelec user.info kernel: [ 0.871188] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
Aug 17 08:33:19 openelec user.debug kernel: [ 0.871205] uhci_hcd 0000:00:1d.1: setting latency timer to 64
Aug 17 08:33:19 openelec user.info kernel: [ 0.871211] uhci_hcd 0000:00:1d.1: UHCI Host Controller
Aug 17 08:33:19 openelec user.info kernel: [ 0.871226] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
Aug 17 08:33:19 openelec user.info kernel: [ 0.871347] uhci_hcd 0000:00:1d.1: irq 21, io base 0x0000bc00
Aug 17 08:33:19 openelec user.info kernel: [ 0.871635] hub 3-0:1.0: USB hub found
Aug 17 08:33:19 openelec user.info kernel: [ 0.871645] hub 3-0:1.0: 2 ports detected
Aug 17 08:33:19 openelec user.info kernel: [ 0.871770] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
Aug 17 08:33:19 openelec user.debug kernel: [ 0.871782] uhci_hcd 0000:00:1d.2: setting latency timer to 64
Aug 17 08:33:19 openelec user.info kernel: [ 0.871788] uhci_hcd 0000:00:1d.2: UHCI Host Controller
Aug 17 08:33:19 openelec user.info kernel: [ 0.871801] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
Aug 17 08:33:19 openelec user.info kernel: [ 0.871914] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c000
Aug 17 08:33:19 openelec user.info kernel: [ 0.872205] hub 4-0:1.0: USB hub found
Aug 17 08:33:19 openelec user.info kernel: [ 0.872215] hub 4-0:1.0: 2 ports detected
Aug 17 08:33:19 openelec user.info kernel: [ 0.872338] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 22 (level, low) -> IRQ 22
Aug 17 08:33:19 openelec user.debug kernel: [ 0.872351] uhci_hcd 0000:00:1d.3: setting latency timer to 64
Aug 17 08:33:19 openelec user.info kernel: [ 0.872356] uhci_hcd 0000:00:1d.3: UHCI Host Controller
Aug 17 08:33:19 openelec user.info kernel: [ 0.872369] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
Aug 17 08:33:19 openelec user.info kernel: [ 0.872482] uhci_hcd 0000:00:1d.3: irq 22, io base 0x0000c080
Aug 17 08:33:19 openelec user.info kernel: [ 0.872767] hub 5-0:1.0: USB hub found
Aug 17 08:33:19 openelec user.info kernel: [ 0.872777] hub 5-0:1.0: 2 ports detected
Aug 17 08:33:19 openelec user.info kernel: [ 0.872916] Initializing USB Mass Storage driver...
Aug 17 08:33:19 openelec user.info kernel: [ 0.872981] usbcore: registered new interface driver usb-storage
Aug 17 08:33:19 openelec user.info kernel: [ 0.872985] USB Mass Storage support registered.
Aug 17 08:33:19 openelec user.info kernel: [ 0.873093] i8042: PNP: No PS/2 controller found. Probing ports directly.
Aug 17 08:33:19 openelec user.info kernel: [ 0.873745] serio: i8042 KBD port at 0x60,0x64 irq 1
Aug 17 08:33:19 openelec user.info kernel: [ 0.873765] serio: i8042 AUX port at 0x60,0x64 irq 12
Aug 17 08:33:19 openelec user.info kernel: [ 0.873990] mousedev: PS/2 mouse device common for all mice
Aug 17 08:33:19 openelec user.info kernel: [ 0.874441] rtc_cmos 00:03: RTC can wake from S4
Aug 17 08:33:19 openelec user.info kernel: [ 0.874626] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
Aug 17 08:33:19 openelec user.info kernel: [ 0.874718] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
Aug 17 08:33:19 openelec user.info kernel: [ 0.874750] i2c /dev entries driver
Aug 17 08:33:19 openelec user.info kernel: [ 0.874825] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
Aug 17 08:33:19 openelec user.warn kernel: [ 0.874834] ACPI: resource 0000:00:1f.3 [io 0x0400-0x041f] conflicts with ACPI region SMRG [io 0x400-0x40f]
Aug 17 08:33:19 openelec user.info kernel: [ 0.874839] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
Aug 17 08:33:19 openelec user.info kernel: [ 0.875017] lirc_dev: IR Remote Control driver registered, major 252
Aug 17 08:33:19 openelec user.info kernel: [ 0.875022] IR NEC protocol handler initialized
Aug 17 08:33:19 openelec user.info kernel: [ 0.875025] IR RC5(x) protocol handler initialized
Aug 17 08:33:19 openelec user.info kernel: [ 0.875029] IR RC6 protocol handler initialized
Aug 17 08:33:19 openelec user.info kernel: [ 0.875032] IR JVC protocol handler initialized
Aug 17 08:33:19 openelec user.info kernel: [ 0.875035] IR Sony protocol handler initialized
Aug 17 08:33:19 openelec user.info kernel: [ 0.875039] IR RC5 (streamzap) protocol handler initialized
Aug 17 08:33:19 openelec user.info kernel: [ 0.875042] IR MCE Keyboard/mouse protocol handler initialized
Aug 17 08:33:19 openelec user.info kernel: [ 0.875238] cpuidle: using governor ladder
Aug 17 08:33:19 openelec user.info kernel: [ 0.875514] cpuidle: using governor menu
Aug 17 08:33:19 openelec user.info kernel: [ 0.875519] EFI Variables Facility v0.08 2004-May-17
Aug 17 08:33:19 openelec user.info kernel: [ 0.875524] No iBFT detected.
Aug 17 08:33:19 openelec user.info kernel: [ 0.876196] usbcore: registered new interface driver usbhid
Aug 17 08:33:19 openelec user.info kernel: [ 0.876200] usbhid: USB HID core driver
Aug 17 08:33:19 openelec user.info kernel: [ 0.876322] Netfilter messages via NETLINK v0.30.
Aug 17 08:33:19 openelec user.info kernel: [ 0.876758] ip_tables: (C) 2000-2006 Netfilter Core Team
Aug 17 08:33:19 openelec user.info kernel: [ 0.876800] TCP cubic registered
Aug 17 08:33:19 openelec user.info kernel: [ 0.876950] NET: Registered protocol family 10
Aug 17 08:33:19 openelec user.info kernel: [ 0.878103] ip6_tables: (C) 2000-2006 Netfilter Core Team
Aug 17 08:33:19 openelec user.info kernel: [ 0.878135] NET: Registered protocol family 17
Aug 17 08:33:19 openelec user.info kernel: [ 0.878163] lib80211: common routines for IEEE802.11 drivers
Aug 17 08:33:19 openelec user.debug kernel: [ 0.878168] lib80211_crypt: registered algorithm 'NULL'
Aug 17 08:33:19 openelec user.notice kernel: [ 0.878172] Registering the dns_resolver key type
Aug 17 08:33:19 openelec user.info kernel: [ 0.879172] rtc_cmos 00:03: setting system clock to 2012-08-17 08:33:17 UTC (1345192397)
Aug 17 08:33:19 openelec user.info kernel: [ 1.026710] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Aug 17 08:33:19 openelec user.info kernel: [ 1.026739] ata2: SATA link down (SStatus 0 SControl 300)
Aug 17 08:33:19 openelec user.info kernel: [ 1.072866] ata1.00: ATA-8: TOSHIBA MK3259GSXP, GN003J, max UDMA/100
Aug 17 08:33:19 openelec user.info kernel: [ 1.072873] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
Aug 17 08:33:19 openelec user.info kernel: [ 1.073738] ata1.00: configured for UDMA/100
Aug 17 08:33:19 openelec user.notice kernel: [ 1.073991] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK3259GS GN00 PQ: 0 ANSI: 5
Aug 17 08:33:19 openelec user.notice kernel: [ 1.074409] sd 0:0:0:0: Attached scsi generic sg0 type 0
Aug 17 08:33:19 openelec user.notice kernel: [ 1.074448] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
Aug 17 08:33:19 openelec user.notice kernel: [ 1.074455] sd 0:0:0:0: [sda] 4096-byte physical blocks
Aug 17 08:33:19 openelec user.notice kernel: [ 1.074647] sd 0:0:0:0: [sda] Write Protect is off
Aug 17 08:33:19 openelec user.debug kernel: [ 1.074654] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Aug 17 08:33:19 openelec user.notice kernel: [ 1.074730] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Aug 17 08:33:19 openelec user.info kernel: [ 1.122760] sda: sda1 sda2
Aug 17 08:33:19 openelec user.notice kernel: [ 1.123461] sd 0:0:0:0: [sda] Attached SCSI disk
Aug 17 08:33:19 openelec user.info kernel: [ 1.133191] Freeing unused kernel memory: 4364k freed
Aug 17 08:33:19 openelec user.info kernel: [ 1.136050] Write protecting the kernel read-only data: 8192k
Aug 17 08:33:19 openelec user.info kernel: [ 1.147731] Freeing unused kernel memory: 1432k freed
Aug 17 08:33:19 openelec user.info kernel: [ 1.151815] Freeing unused kernel memory: 384k freed
Aug 17 08:33:19 openelec user.info kernel: [ 1.230051] usb 1-4: new high-speed USB device number 3 using ehci_hcd
Aug 17 08:33:19 openelec user.info kernel: [ 1.256567] uvesafb: NVIDIA Corporation, GT218 Board - 06930002, Chip Rev , OEM: NVIDIA, VBE v3.0
Aug 17 08:33:19 openelec user.info kernel: [ 1.347804] uvesafb: VBIOS/hardware doesn't support DDC transfers
Aug 17 08:33:19 openelec user.info kernel: [ 1.347812] uvesafb: no monitor limits have been set, default refresh rate will be used
Aug 17 08:33:19 openelec user.info kernel: [ 1.348516] uvesafb: scrolling: redraw
Aug 17 08:33:19 openelec user.info kernel: [ 1.466708] usb 1-6: new high-speed USB device number 4 using ehci_hcd
Aug 17 08:33:19 openelec user.info kernel: [ 1.486725] Refined TSC clocksource calibration: 1795.563 MHz.
Aug 17 08:33:19 openelec user.info kernel: [ 1.486735] Switching to clocksource tsc
Aug 17 08:33:19 openelec user.info kernel: [ 1.501461] Console: switching to colour frame buffer device 80x30
Aug 17 08:33:19 openelec user.info kernel: [ 1.504765] uvesafb: framebuffer at 0xcf000000, mapped to 0xffffc90010680000, using 10240k, total 14336k
Aug 17 08:33:19 openelec user.info kernel: [ 1.504771] fb0: VESA VGA frame buffer device
Aug 17 08:33:19 openelec user.info kernel: [ 1.507387] xhci_hcd 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Aug 17 08:33:19 openelec user.debug kernel: [ 1.507421] xhci_hcd 0000:05:00.0: setting latency timer to 64
Aug 17 08:33:19 openelec user.info kernel: [ 1.507428] xhci_hcd 0000:05:00.0: xHCI Host Controller
Aug 17 08:33:19 openelec user.info kernel: [ 1.507443] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 6
Aug 17 08:33:19 openelec user.info kernel: [ 1.507734] xhci_hcd 0000:05:00.0: irq 16, io mem 0xfbffe000
Aug 17 08:33:19 openelec user.debug kernel: [ 1.507847] xhci_hcd 0000:05:00.0: irq 46 for MSI/MSI-X
Aug 17 08:33:19 openelec user.debug kernel: [ 1.507861] xhci_hcd 0000:05:00.0: irq 47 for MSI/MSI-X
Aug 17 08:33:19 openelec user.debug kernel: [ 1.507874] xhci_hcd 0000:05:00.0: irq 48 for MSI/MSI-X
Aug 17 08:33:19 openelec user.debug kernel: [ 1.507887] xhci_hcd 0000:05:00.0: irq 49 for MSI/MSI-X
Aug 17 08:33:19 openelec user.debug kernel: [ 1.507900] xhci_hcd 0000:05:00.0: irq 50 for MSI/MSI-X
Aug 17 08:33:19 openelec user.debug kernel: [ 1.508515] xHCI xhci_add_endpoint called for root hub
Aug 17 08:33:19 openelec user.debug kernel: [ 1.508521] xHCI xhci_check_bandwidth called for root hub
Aug 17 08:33:19 openelec user.info kernel: [ 1.508590] hub 6-0:1.0: USB hub found
Aug 17 08:33:19 openelec user.info kernel: [ 1.508604] hub 6-0:1.0: 2 ports detected
Aug 17 08:33:19 openelec user.info kernel: [ 1.508725] xhci_hcd 0000:05:00.0: xHCI Host Controller
Aug 17 08:33:19 openelec user.info kernel: [ 1.508736] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 7
Aug 17 08:33:19 openelec user.debug kernel: [ 1.511237] xHCI xhci_add_endpoint called for root hub
Aug 17 08:33:19 openelec user.debug kernel: [ 1.511242] xHCI xhci_check_bandwidth called for root hub
Aug 17 08:33:19 openelec user.info kernel: [ 1.511307] hub 7-0:1.0: USB hub found
Aug 17 08:33:19 openelec user.info kernel: [ 1.511320] hub 7-0:1.0: 2 ports detected
Aug 17 08:33:19 openelec user.info kernel: [ 1.595548] scsi4 : usb-storage 1-6:1.0
Aug 17 08:33:19 openelec user.info kernel: [ 1.700033] usb 1-8: new high-speed USB device number 5 using ehci_hcd
Aug 17 08:33:19 openelec user.err kernel: [ 1.706942] EXT4-fs (sda1): couldn't mount as ext3 due to feature incompatibilities
Aug 17 08:33:19 openelec user.err kernel: [ 1.726908] EXT4-fs (sda1): couldn't mount as ext2 due to feature incompatibilities
Aug 17 08:33:19 openelec user.info kernel: [ 1.789323] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
Aug 17 08:33:19 openelec user.info kernel: [ 1.826184] scsi5 : usb-storage 1-8:1.0
Aug 17 08:33:19 openelec user.info kernel: [ 2.050032] usb 2-1: new low-speed USB device number 2 using uhci_hcd
Aug 17 08:33:19 openelec user.err kernel: [ 2.190276] EXT4-fs (sda2): couldn't mount as ext3 due to feature incompatibilities
Aug 17 08:33:19 openelec user.err kernel: [ 2.213626] EXT4-fs (sda2): couldn't mount as ext2 due to feature incompatibilities
Aug 17 08:33:19 openelec user.info kernel: [ 2.344248] input: USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input2
Aug 17 08:33:19 openelec user.info kernel: [ 2.344468] generic-usb 0003:04D9:1503.0001: input,hidraw0: USB HID v1.10 Keyboard [ USB Keyboard] on usb-0000:00:1d.0-1/input0
Aug 17 08:33:19 openelec user.info kernel: [ 2.433944] input: USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.1/input/input3
Aug 17 08:33:19 openelec user.info kernel: [ 2.434158] generic-usb 0003:04D9:1503.0002: input,hidraw1: USB HID v1.10 Device [ USB Keyboard] on usb-0000:00:1d.0-1/input1
Aug 17 08:33:19 openelec user.notice kernel: [ 2.598242] scsi 4:0:0:0: Direct-Access Generic STORAGE DEVICE 0206 PQ: 0 ANSI: 0
Aug 17 08:33:19 openelec user.notice kernel: [ 2.599590] sd 4:0:0:0: Attached scsi generic sg1 type 0
Aug 17 08:33:19 openelec user.notice kernel: [ 2.600967] sd 4:0:0:0: [sdb] Attached SCSI removable disk
Aug 17 08:33:19 openelec user.info kernel: [ 2.670179] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
Aug 17 08:33:19 openelec user.notice kernel: [ 2.828228] scsi 5:0:0:0: CD-ROM Optiarc DVD RW AD-7690H 1.00 PQ: 0 ANSI: 0
Aug 17 08:33:19 openelec user.warn kernel: [ 2.833204] sr0: scsi3-mmc drive: 10x/24x writer dvd-ram cd/rw xa/form2 cdda caddy
Aug 17 08:33:19 openelec user.info kernel: [ 2.833210] cdrom: Uniform CD-ROM driver Revision: 3.20
Aug 17 08:33:19 openelec user.debug kernel: [ 2.833487] sr 5:0:0:0: Attached scsi CD-ROM sr0
Aug 17 08:33:19 openelec user.notice kernel: [ 2.833902] sr 5:0:0:0: Attached scsi generic sg2 type 5
Aug 17 08:33:20 openelec user.err kernel: 0>[ 3.411743] systemd-udevd[234]: starting version 187
Aug 17 08:33:20 openelec user.notice Boot: ### monitoring udev events ###
Aug 17 08:33:20 openelec user.notice Boot: ### request udev events from the kernel (type: subsystems) ###
Aug 17 08:33:20 openelec user.notice Boot: ### request udev events from the kernel (type: devices) ###
Aug 17 08:33:20 openelec user.notice Boot: ### watching udev event queue from the kernel ###
Aug 17 08:33:20 openelec user.notice Boot: ### Starting D-BUS ###
Aug 17 08:33:20 openelec user.notice Boot: ### Starting Fuse ###
Aug 17 08:33:20 openelec user.notice Boot: ### loading kernel modules ###
Aug 17 08:33:20 openelec user.notice Boot: ### starting Connection manager ###
Aug 17 08:33:20 openelec user.notice Boot: ### creating system settings ###
Aug 17 08:33:20 openelec user.notice Boot: ### start rpcbind daemon ###
Aug 17 08:33:20 openelec user.notice Boot: ### Setup hostname ###
Aug 17 08:33:20 openelec user.debug kernel: [ 3.600881] ite-cir 00:0a: [io 0x02f8-0x02ff]
Aug 17 08:33:20 openelec user.debug kernel: [ 3.603131] ite-cir 00:0a: [irq 5]
Aug 17 08:33:20 openelec user.info kernel: [ 3.606624] ite-cir 00:0a: activated
Aug 17 08:33:20 openelec user.notice kernel: [ 3.606646] ite_cir: Auto-detected model: ITE8713 CIR transceiver
Aug 17 08:33:20 openelec user.notice kernel: [ 3.606652] ite_cir: Using model: ITE8713 CIR transceiver
Aug 17 08:33:20 openelec user.notice kernel: [ 3.606659] ite_cir: TX-capable: 1
Aug 17 08:33:20 openelec user.notice kernel: [ 3.606663] ite_cir: Sample period (ns): 8680
Aug 17 08:33:20 openelec user.notice kernel: [ 3.606709] ite_cir: TX carrier frequency (Hz): 38000
Aug 17 08:33:20 openelec user.notice kernel: [ 3.606715] ite_cir: TX duty cycle (%): 33
Aug 17 08:33:20 openelec user.notice kernel: [ 3.606719] ite_cir: RX low carrier frequency (Hz): 0
Aug 17 08:33:20 openelec user.notice kernel: [ 3.606725] ite_cir: RX high carrier frequency (Hz): 0
Aug 17 08:33:20 openelec user.info kernel: [ 3.606913] Registered IR keymap rc-rc6-mce
Aug 17 08:33:20 openelec user.notice Boot: ### creating /etc/hosts ###
Aug 17 08:33:20 openelec user.info kernel: [ 3.607238] input: ITE8713 CIR transceiver as /devices/virtual/rc/rc0/input4
Aug 17 08:33:20 openelec user.info kernel: [ 3.607439] rc0: ITE8713 CIR transceiver as /devices/virtual/rc/rc0
Aug 17 08:33:20 openelec user.info kernel: [ 3.610481] input: MCE IR Keyboard/Mouse (ite-cir) as /devices/virtual/input/input5
Aug 17 08:33:20 openelec user.notice kernel: [ 3.611522] ite_cir: driver has been successfully loaded
Aug 17 08:33:20 openelec user.warn kernel: [ 3.659434] coretemp coretemp.0: Using relative temperature scale!
Aug 17 08:33:20 openelec user.warn kernel: [ 3.659473] coretemp coretemp.0: Using relative temperature scale!
Aug 17 08:33:20 openelec user.notice Boot: ### Setup networking 1 LAN ###
Aug 17 08:33:20 openelec user.notice Connman: ### [1] found /sys/class/net/eth0/address, continue ###
Aug 17 08:33:19 openelec user.notice Boot: ### automount internal disks ###
Aug 17 08:33:19 openelec user.notice Boot: ### starting ConsoleKit daemon ###
Aug 17 08:33:19 openelec user.info kernel: [ 4.181037] ath9k 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
Aug 17 08:33:19 openelec user.debug kernel: [ 4.181058] ath9k 0000:03:00.0: setting latency timer to 64
Aug 17 08:33:19 openelec user.debug kernel: [ 4.230929] ath: EEPROM regdomain: 0x60
Aug 17 08:33:19 openelec user.debug kernel: [ 4.230937] ath: EEPROM indicates we should expect a direct regpair map
Aug 17 08:33:19 openelec user.debug kernel: [ 4.230949] ath: Country alpha2 being used: 00
Aug 17 08:33:19 openelec user.debug kernel: [ 4.230953] ath: Regpair used: 0x60
Aug 17 08:33:19 openelec user.info kernel: [ 4.235320] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
Aug 17 08:33:19 openelec user.debug kernel: [ 4.235416] snd_hda_intel 0000:00:1b.0: irq 51 for MSI/MSI-X
Aug 17 08:33:19 openelec user.debug kernel: [ 4.236021] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
Aug 17 08:33:19 openelec user.debug kernel: [ 4.236583] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
Aug 17 08:33:19 openelec user.debug kernel: [ 4.238156] Registered led device: ath9k-phy0
Aug 17 08:33:19 openelec user.info kernel: [ 4.238178] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffc900121c0000, irq=18
Aug 17 08:33:19 openelec user.info kernel: [ 4.326326] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
Aug 17 08:33:19 openelec user.info kernel: [ 4.332502] snd_hda_intel 0000:02:00.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
Aug 17 08:33:19 openelec user.info kernel: [ 4.332512] hda_intel: Disabling MSI
Aug 17 08:33:19 openelec user.debug kernel: [ 4.333747] snd_hda_intel 0000:02:00.1: setting latency timer to 64
Aug 17 08:33:19 openelec daemon.info connmand[373]: Connection Manager version 1.4
Aug 17 08:33:19 openelec daemon.notice dbus[466]: [system] Activating service name='org.freedesktop.UDisks' (using servicehelper)
Aug 17 08:33:19 openelec user.notice Boot: ### SSH: generating SSH1 RSA key ###
Aug 17 08:33:19 openelec user.notice Boot: ### Setting up sound card ###
Aug 17 08:33:19 openelec user.notice Boot: ### Starting Avahi Daemon ###
Aug 17 08:33:19 openelec user.notice Boot: ### starting eventlircd ###
Aug 17 08:33:19 openelec daemon.notice dbus[466]: [system] Activating service name='org.freedesktop.PolicyKit1' (using servicehelper)
Aug 17 08:33:19 openelec daemon.info connmand[373]: Checking loopback interface settings
Aug 17 08:33:19 openelec daemon.info connmand[373]: System hostname is openelec
Aug 17 08:33:19 openelec daemon.info connmand[373]: lo {newlink} index 1 operstate 0 <UNKNOWN>
Aug 17 08:33:19 openelec daemon.notice dbus[466]: [system] Activating service name='fi.w1.wpa_supplicant1' (using servicehelper)
Aug 17 08:33:19 openelec daemon.info connmand[373]: eth0 {create} index 2 type 1 <ETHER>
Aug 17 08:33:19 openelec daemon.info connmand[373]: eth0 {update} flags 4098 <DOWN>
Aug 17 08:33:19 openelec daemon.info connmand[373]: eth0 {newlink} index 2 address C8:60:00:42:A5:57 mtu 1500
Aug 17 08:33:19 openelec daemon.info connmand[373]: eth0 {newlink} index 2 operstate 2 <DOWN>
Aug 17 08:33:19 openelec daemon.info connmand[373]: Adding interface eth0 [ ethernet ]
Aug 17 08:33:19 openelec user.notice Boot: ### starting Windowmanager ###
Aug 17 08:33:19 openelec user.notice Boot: ### clean up log files ###
Aug 17 08:33:19 openelec daemon.info connmand[373]: wlan0 {create} index 3 type 1 <ETHER>
Aug 17 08:33:19 openelec daemon.info connmand[373]: wlan0 {update} flags 4098 <DOWN>
Aug 17 08:33:19 openelec daemon.info connmand[373]: wlan0 {newlink} index 3 address 94B:C9:38:63:06 mtu 1500
Aug 17 08:33:19 openelec daemon.info connmand[373]: wlan0 {newlink} index 3 operstate 2 <DOWN>
Aug 17 08:33:19 openelec daemon.info connmand[373]: Adding interface wlan0 [ wifi ]
Aug 17 08:33:19 openelec daemon.info connmand[373]: eth0 {update} flags 4163 <UP,RUNNING>
Aug 17 08:33:19 openelec daemon.info connmand[373]: eth0 {newlink} index 2 address C8:60:00:42:A5:57 mtu 1500
Aug 17 08:33:19 openelec daemon.info connmand[373]: eth0 {newlink} index 2 operstate 0 <UNKNOWN>
Aug 17 08:33:19 openelec user.info kernel: [ 4.567971] r8168: eth0: link down
Aug 17 08:33:19 openelec user.info kernel: [ 4.568772] ADDRCONF(NETDEV_UP): eth0: link is not ready
Aug 17 08:33:19 openelec daemon.info connmand[373]: eth0 {update} flags 4099 <UP>
Aug 17 08:33:19 openelec daemon.info connmand[373]: eth0 {newlink} index 2 address C8:60:00:42:A5:57 mtu 1500
Aug 17 08:33:19 openelec daemon.info connmand[373]: eth0 {newlink} index 2 operstate 2 <DOWN>
Aug 17 08:33:19 openelec user.notice Boot: ### setup XBMC ###
Aug 17 08:33:19 openelec daemon.info avahi-daemon[688]: Found user 'avahi' (UID 495) and group 'avahi' (GID 495).
Aug 17 08:33:19 openelec daemon.info avahi-daemon[688]: Successfully dropped root privileges.
Aug 17 08:33:19 openelec daemon.info avahi-daemon[688]: avahi-daemon 0.6.31 starting up.
Aug 17 08:33:19 openelec daemon.warn avahi-daemon[688]: WARNING: No NSS support for mDNS detected, consider installing nss-mdns!
Aug 17 08:33:19 openelec daemon.info avahi-daemon[688]: Loading service file /etc/avahi/services/http.service.
Aug 17 08:33:19 openelec daemon.info avahi-daemon[688]: Loading service file /etc/avahi/services/sftp-ssh.service.
Aug 17 08:33:19 openelec daemon.info avahi-daemon[688]: Loading service file /etc/avahi/services/ssh.service.
Aug 17 08:33:19 openelec daemon.info avahi-daemon[688]: Network interface enumeration completed.
Aug 17 08:33:19 openelec daemon.info avahi-daemon[688]: Registering HINFO record with values 'X86_64'/'LINUX'.
Aug 17 08:33:19 openelec daemon.info avahi-daemon[688]: Server startup complete. Host name is openelec.local. Local service cookie is 3533856410.
Aug 17 08:33:19 openelec daemon.info avahi-daemon[688]: Service "openelec" (/etc/avahi/services/ssh.service) successfully established.
Aug 17 08:33:19 openelec daemon.info avahi-daemon[688]: Service "openelec" (/etc/avahi/services/sftp-ssh.service) successfully established.
Aug 17 08:33:19 openelec daemon.info avahi-daemon[688]: Service "Web Server on openelec" (/etc/avahi/services/http.service) successfully established.
Aug 17 08:33:19 openelec daemon.info polkitd[671]: started daemon version 0.104 using authority implementation `local' version `0.104'
Aug 17 08:33:19 openelec daemon.notice dbus[466]: [system] Successfully activated service 'org.freedesktop.PolicyKit1'
Aug 17 08:33:20 openelec daemon.notice dbus[466]: [system] Successfully activated service 'org.freedesktop.UDisks'
Aug 17 08:33:20 openelec user.notice Boot: ### starting XBMC ###
Aug 17 08:33:20 openelec daemon.notice dbus[466]: [system] Successfully activated service 'fi.w1.wpa_supplicant1'
Aug 17 08:33:20 openelec user.info kernel: [ 5.000081] HDMI status: Codec=0 Pin=5 Presence_Detect=0 ELD_Valid=0
Aug 17 08:33:20 openelec user.info kernel: [ 5.026734] HDMI status: Codec=1 Pin=5 Presence_Detect=0 ELD_Valid=0
Aug 17 08:33:20 openelec user.info kernel: [ 5.053410] HDMI status: Codec=2 Pin=5 Presence_Detect=0 ELD_Valid=0
Aug 17 08:33:20 openelec daemon.info connmand[373]: wlan0 {update} flags 4163 <UP,RUNNING>
Aug 17 08:33:20 openelec daemon.info connmand[373]: wlan0 {newlink} index 3 address 94B:C9:38:63:06 mtu 1500
Aug 17 08:33:20 openelec daemon.info connmand[373]: wlan0 {newlink} index 3 operstate 0 <UNKNOWN>
Aug 17 08:33:20 openelec user.info kernel: [ 5.080149] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0
Aug 17 08:33:20 openelec daemon.info connmand[373]: wlan0 {update} flags 4099 <UP>
Aug 17 08:33:20 openelec daemon.info connmand[373]: wlan0 {newlink} index 3 address 94B:C9:38:63:06 mtu 1500
Aug 17 08:33:20 openelec daemon.info connmand[373]: wlan0 {newlink} index 3 operstate 5 <DORMANT>
Aug 17 08:33:20 openelec user.info kernel: [ 5.084004] ADDRCONF(NETDEV_UP): wlan0: link is not ready
Aug 17 08:33:20 openelec user.info kernel: [ 5.093696] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1c.3/0000:02:00.1/sound/card1/input7
Aug 17 08:33:20 openelec user.info kernel: [ 5.094031] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1c.3/0000:02:00.1/sound/card1/input8
Aug 17 08:33:20 openelec user.info kernel: [ 5.094340] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1c.3/0000:02:00.1/sound/card1/input9
Aug 17 08:33:20 openelec user.info kernel: [ 5.094663] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1c.3/0000:02:00.1/sound/card1/input10
Aug 17 08:33:20 openelec user.notice Boot: ### SSH: generating SSH2 RSA key ###
Aug 17 08:33:20 openelec user.notice Boot: ### Setting up sound card ###
Aug 17 08:33:20 openelec user.warn kernel: [ 5.299856] nvidia: module license 'NVIDIA' taints kernel.
Aug 17 08:33:20 openelec user.warn kernel: [ 5.299865] Disabling lock debugging due to kernel taint
Aug 17 08:33:21 openelec user.info kernel: [ 6.106946] r8168: eth0: link up
Aug 17 08:33:21 openelec daemon.info connmand[373]: wlan0 {newlink} index 3 address 94B:C9:38:63:06 mtu 1500
Aug 17 08:33:21 openelec daemon.info connmand[373]: wlan0 {newlink} index 3 operstate 2 <DOWN>
Aug 17 08:33:21 openelec daemon.info connmand[373]: eth0 {add} route ff00:: gw :: scope 0 <UNIVERSE>
Aug 17 08:33:21 openelec daemon.info connmand[373]: eth0 {add} route fe80:: gw :: scope 0 <UNIVERSE>
Aug 17 08:33:21 openelec daemon.info connmand[373]: eth0 {update} flags 69699 <UP,RUNNING,LOWER_UP>
Aug 17 08:33:21 openelec daemon.info connmand[373]: eth0 {newlink} index 2 address C8:60:00:42:A5:57 mtu 1500
Aug 17 08:33:21 openelec daemon.info connmand[373]: eth0 {newlink} index 2 operstate 6 <UP>
Aug 17 08:33:21 openelec user.info kernel: [ 6.345379] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Aug 17 08:33:21 openelec daemon.info connmand[373]: eth0 {del} route fe80:: gw :: scope 0 <UNIVERSE>
Aug 17 08:33:21 openelec daemon.info connmand[373]: eth0 {del} route ff00:: gw :: scope 0 <UNIVERSE>
Aug 17 08:33:21 openelec user.info kernel: [ 6.348421] nvidia 0000:02:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
Aug 17 08:33:21 openelec user.debug kernel: [ 6.348445] nvidia 0000:02:00.0: setting latency timer to 64
Aug 17 08:33:21 openelec user.info kernel: [ 6.348457] vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+mem,decodes=nonewns=io+mem
Aug 17 08:33:21 openelec user.warn kernel: [ 6.350603] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 295.71 Thu Aug 2 19:22:08 PDT 2012
Aug 17 08:33:21 openelec user.notice Boot: ### SSH: generating SSH2 DSA key ###
Aug 17 08:33:21 openelec user.notice Boot: ### Starting Samba server ###
Aug 17 08:33:21 openelec user.notice Xorg: ### starting Xorg with driver nvidia ###
Aug 17 08:33:21 openelec user.notice Xorg: ### setup xorg.conf paths ###
Aug 17 08:33:21 openelec user.notice Xorg: ### creating start options ###
Aug 17 08:33:21 openelec user.notice Xorg: ### creating needed directories and symlinks ###
Aug 17 08:33:21 openelec user.notice Xorg: ### starting Xorg with ':0.0 vt01 -s 0 -noreset -allowMouseOpenFail -config /etc/X11/xorg-nvidia.conf -ignoreABI' ###
Aug 17 08:33:21 openelec user.info kernel: [ 6.573425] r8168: eth0: link up
Aug 17 08:33:22 openelec daemon.warn connmand[373]: Skipping disconnect of carrier, network is connecting.
Aug 17 08:33:22 openelec daemon.info connmand[373]: eth0 {add} route ff00:: gw :: scope 0 <UNIVERSE>
Aug 17 08:33:22 openelec daemon.info connmand[373]: eth0 {add} route fe80:: gw :: scope 0 <UNIVERSE>
Aug 17 08:33:22 openelec daemon.err smbd[1195]: [2012/08/17 08:33:22.413256, 0] passdb/pdb_smbpasswd.c:248(startsmbfilepwent)
Aug 17 08:33:22 openelec daemon.err smbd[1195]: startsmbfilepwent_internal: file /var/run/smbpasswd did not exist. File successfully created.
Aug 17 08:33:23 openelec daemon.info connmand[373]: Setting domainname to fritz.box
Aug 17 08:33:23 openelec daemon.info avahi-daemon[688]: Joining mDNS multicast group on interface eth0.IPv4 with address 192.168.178.44.
Aug 17 08:33:23 openelec daemon.err connmand[373]: Deleting host route failed (No such process)
Aug 17 08:33:23 openelec daemon.info avahi-daemon[688]: New relevant interface eth0.IPv4 for mDNS.
Aug 17 08:33:23 openelec daemon.info avahi-daemon[688]: Registering new address record for 192.168.178.44 on eth0.IPv4.
Aug 17 08:33:23 openelec daemon.info connmand[373]: eth0 {add} address 192.168.178.44/24 label eth0 family 2
Aug 17 08:33:23 openelec daemon.info connmand[373]: eth0 {add} route 192.168.178.0 gw 0.0.0.0 scope 253 <LINK>
Aug 17 08:33:23 openelec daemon.info connmand[373]: eth0 {add} route 192.168.178.1 gw 0.0.0.0 scope 253 <LINK>
Aug 17 08:33:23 openelec daemon.info connmand[373]: eth0 {add} route 0.0.0.0 gw 192.168.178.1 scope 0 <UNIVERSE>
Aug 17 08:33:23 openelec daemon.err connmand[373]: Setting default gateway route failed (File exists)
Aug 17 08:33:23 openelec daemon.info connmand[373]: eth0 {add} route 81.169.141.235 gw 192.168.178.1 scope 0 <UNIVERSE>
Aug 17 08:33:23 openelec daemon.info connmand[373]: Client-IP: 93.222.126.152
Aug 17 08:33:23 openelec daemon.info connmand[373]: Client-Country: DE
Aug 17 08:33:23 openelec daemon.info connmand[373]: eth0 {del} route 81.169.141.235 gw 192.168.178.1 scope 0 <UNIVERSE>
Aug 17 08:33:23 openelec user.notice Boot: ### Starting SSH Server ###
Aug 17 08:33:23 openelec daemon.info avahi-daemon[688]: Registering new address record for fe80::ca60:ff:fe42:a557 on eth0.*.
Aug 17 08:33:26 openelec daemon.notice dbus[466]: [system] Activating service name='org.freedesktop.UPower' (using servicehelper)
Aug 17 08:33:26 openelec daemon.notice dbus[466]: [system] Successfully activated service 'org.freedesktop.UPower'
Aug 17 08:33:26 openelec user.info kernel: [ 11.016958] EXT4-fs (sda1): re-mounted. Opts: barrier=1,stripe=4,data=ordered,commit=0
Aug 17 08:33:26 openelec user.info kernel: [ 11.684688] EXT4-fs (sda2): re-mounted. Opts: barrier=1,data=ordered,commit=0
Aug 17 08:33:31 openelec daemon.info connmand[373]: ntp: time slew +1.041418 s
Aug 17 08:33:33 openelec user.debug kernel: [ 17.416700] eth0: no IPv6 routers present
Aug 17 08:33:38 openelec user.notice Boot: ### set cpu's to 'conservative' ###
Aug 17 08:33:50 openelec user.notice Boot: ### syncing hardware clock with system clock ###

 

[ripblade]

sorry here is dmesg" output

[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.26 (jetstream@1801-lin007) (gcc version 4.7.1 (GCC) ) #1 SMP Sun Aug 12 00:34:15 CEST 2012
[ 0.000000] Command line: boot=LABEL=System disk=LABEL=Storage ssh quiet BOOT_IMAGE=/KERNEL
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007ffa0000 (usable)
[ 0.000000] BIOS-e820: 000000007ffa0000 - 000000007ffae000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007ffae000 - 000000007ffe0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007ffe0000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] DMI: ASUSTeK Computer INC. EB1501P/EB1501P, BIOS 0601 02/03/2012
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x7ffa0 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-000000007ffa0000
[ 0.000000] 0000000000 - 007fe00000 page 2M
[ 0.000000] 007fe00000 - 007ffa0000 page 4k
[ 0.000000] kernel direct mapping tables up to 7ffa0000 @ 1fffc000-20000000
[ 0.000000] ACPI: RSDP 00000000000fbb70 00024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 000000007ffa0100 0004C (v01 020312 XSDT1608 20120203 MSFT 00000097)
[ 0.000000] ACPI: FACP 000000007ffa0290 000F4 (v03 020312 FACP1608 20120203 MSFT 00000097)
[ 0.000000] ACPI: DSDT 000000007ffa0440 05D1C (v01 A1654 A1654000 00000000 INTL 20060113)
[ 0.000000] ACPI: FACS 000000007ffae000 00040
[ 0.000000] ACPI: APIC 000000007ffa0390 0006C (v01 020312 APIC1608 20120203 MSFT 00000097)
[ 0.000000] ACPI: MCFG 000000007ffa0400 0003C (v01 020312 OEMMCFG 20120203 MSFT 00000097)
[ 0.000000] ACPI: OEMB 000000007ffae040 00072 (v01 020312 OEMB1608 20120203 MSFT 00000097)
[ 0.000000] ACPI: HPET 000000007ffaa440 00038 (v01 020312 OEMHPET 20120203 MSFT 00000097)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff88007d600000-ffff88007f1fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal empty
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0007ffa0
[ 0.000000] On node 0 totalpages: 524079
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3922 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 7111 pages used for memmap
[ 0.000000] DMA32 zone: 512985 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:7ee00000)
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 25 pages/cpu @ffff88007fc00000 s70208 r8192 d24000 u524288
[ 0.000000] pcpu-alloc: s70208 r8192 d24000 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 516907
[ 0.000000] Kernel command line: fastboot root=/dev/ram0 rdinit=/init threadirqs boot=LABEL=System disk=LABEL=Storage ssh quiet BOOT_IMAGE=/KERNEL
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.000000] Memory: 2050600k/2096768k available (4702k kernel code, 452k absent, 45716k reserved, 3938k data, 4364k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 32
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:4352 nr_irqs:712 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1795.358 MHz processor.
[ 0.003339] Calibrating delay loop (skipped), value calculated using timer frequency.. 3592.32 BogoMIPS (lpj=5984526)
[ 0.003348] pid_max: default: 32768 minimum: 301
[ 0.006729] Mount-cache hash table entries: 256
[ 0.006943] Initializing cgroup subsys cpuacct
[ 0.006953] Initializing cgroup subsys freezer
[ 0.006985] CPU: Physical Processor ID: 0
[ 0.006988] CPU: Processor Core ID: 0
[ 0.006992] using mwait in idle threads.
[ 0.007035] ACPI: Core revision 20111123
[ 0.017139] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.052145] CPU0: Intel(R) Atom(TM) CPU D525 @ 1.80GHz stepping 0a
[ 0.053330] APIC calibration not consistent with PM-Timer: 156ms instead of 100ms
[ 0.053330] APIC delta adjusted to PM-Timer: 1246917 (1953502)
[ 0.053330] Performance Events: PEBS fmt0+, Atom events, Intel PMU driver.
[ 0.053330] ... version: 3
[ 0.053330] ... bit width: 40
[ 0.053330] ... generic registers: 2
[ 0.053330] ... value mask: 000000ffffffffff
[ 0.053330] ... max period: 000000007fffffff
[ 0.053330] ... fixed-purpose events: 3
[ 0.053330] ... event mask: 0000000700000003
[ 0.053330] Booting Node 0, Processors #1
[ 0.053330] smpboot cpu 1: start_ip = 9a000
[ 0.006666] Disabled fast string operations
[ 0.146857] #2
[ 0.146862] smpboot cpu 2: start_ip = 9a000
[ 0.006666] Disabled fast string operations
[ 0.243557] #3 Ok.
[ 0.243562] smpboot cpu 3: start_ip = 9a000
[ 0.006666] Disabled fast string operations
[ 0.339999] Brought up 4 CPUs
[ 0.340007] Total of 4 processors activated (14369.51 BogoMIPS).
[ 0.341227] devtmpfs: initialized
[ 0.341227] NET: Registered protocol family 16
[ 0.341227] ACPI: bus type pci registered
[ 0.341227] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.341227] PCI: not using MMCONFIG
[ 0.341227] PCI: Using configuration type 1 for base access
[ 0.345226] bio: create slab <bio-0> at 0
[ 0.345226] ACPI: Added _OSI(Module Device)
[ 0.345226] ACPI: Added _OSI(Processor Device)
[ 0.345226] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.345226] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.347900] ACPI: EC: Look up EC in DSDT
[ 0.350419] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.355673] ACPI: Interpreter enabled
[ 0.355684] ACPI: (supports S0 S1 S3 S5)
[ 0.355729] ACPI: Using IOAPIC for interrupt routing
[ 0.355795] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.357640] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.404711] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.404930] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.405363] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.405370] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.405376] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.405382] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
[ 0.405388] pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xdfffffff]
[ 0.405394] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfed8ffff]
[ 0.405420] pci 0000:00:00.0: [8086:a000] type 0 class 0x000600
[ 0.405498] pci 0000:00:1b.0: [8086:27d8] type 0 class 0x000403
[ 0.405517] pci 0000:00:1b.0: reg 10: [mem 0xf9ff8000-0xf9ffbfff 64bit]
[ 0.405587] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.405595] pci 0000:00:1b.0: PME# disabled
[ 0.405620] pci 0000:00:1c.0: [8086:27d0] type 1 class 0x000604
[ 0.405691] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.405697] pci 0000:00:1c.0: PME# disabled
[ 0.405722] pci 0000:00:1c.1: [8086:27d2] type 1 class 0x000604
[ 0.405792] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.405799] pci 0000:00:1c.1: PME# disabled
[ 0.405825] pci 0000:00:1c.2: [8086:27d4] type 1 class 0x000604
[ 0.405895] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.405901] pci 0000:00:1c.2: PME# disabled
[ 0.405926] pci 0000:00:1c.3: [8086:27d6] type 1 class 0x000604
[ 0.405996] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.406002] pci 0000:00:1c.3: PME# disabled
[ 0.406029] pci 0000:00:1d.0: [8086:27c8] type 0 class 0x000c03
[ 0.406071] pci 0000:00:1d.0: reg 20: [io 0xb880-0xb89f]
[ 0.406108] pci 0000:00:1d.1: [8086:27c9] type 0 class 0x000c03
[ 0.406149] pci 0000:00:1d.1: reg 20: [io 0xbc00-0xbc1f]
[ 0.406187] pci 0000:00:1d.2: [8086:27ca] type 0 class 0x000c03
[ 0.406228] pci 0000:00:1d.2: reg 20: [io 0xc000-0xc01f]
[ 0.406265] pci 0000:00:1d.3: [8086:27cb] type 0 class 0x000c03
[ 0.406306] pci 0000:00:1d.3: reg 20: [io 0xc080-0xc09f]
[ 0.406353] pci 0000:00:1d.7: [8086:27cc] type 0 class 0x000c03
[ 0.406375] pci 0000:00:1d.7: reg 10: [mem 0xf9fff800-0xf9fffbff]
[ 0.406456] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.406463] pci 0000:00:1d.7: PME# disabled
[ 0.406485] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[ 0.406554] pci 0000:00:1f.0: [8086:27bc] type 0 class 0x000601
[ 0.406631] pci 0000:00:1f.0: [Firmware Bug]: TigerPoint LPC.BM_STS cleared
[ 0.406695] pci 0000:00:1f.2: [8086:27c1] type 0 class 0x000106
[ 0.406715] pci 0000:00:1f.2: reg 10: [io 0xcc00-0xcc07]
[ 0.406726] pci 0000:00:1f.2: reg 14: [io 0xc880-0xc883]
[ 0.406737] pci 0000:00:1f.2: reg 18: [io 0xc800-0xc807]
[ 0.406748] pci 0000:00:1f.2: reg 1c: [io 0xc480-0xc483]
[ 0.406759] pci 0000:00:1f.2: reg 20: [io 0xc400-0xc41f]
[ 0.406775] pci 0000:00:1f.2: reg 24: [mem 0xf9fffc00-0xf9ffffff]
[ 0.406824] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.406831] pci 0000:00:1f.2: PME# disabled
[ 0.406855] pci 0000:00:1f.3: [8086:27da] type 0 class 0x000c05
[ 0.406908] pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f]
[ 0.407011] pci 0000:05:00.0: [1033:0194] type 0 class 0x000c03
[ 0.407042] pci 0000:05:00.0: reg 10: [mem 0xfbffe000-0xfbffffff 64bit]
[ 0.407178] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
[ 0.407187] pci 0000:05:00.0: PME# disabled
[ 0.413327] pci 0000:00:1c.0: PCI bridge to [bus 05-05]
[ 0.413337] pci 0000:00:1c.0: bridge window [mem 0xfbf00000-0xfbffffff]
[ 0.413412] pci 0000:04:00.0: [10ec:8168] type 0 class 0x000200
[ 0.413412] pci 0000:04:00.0: reg 10: [io 0xe800-0xe8ff]
[ 0.413412] pci 0000:04:00.0: reg 18: [mem 0xf8fff000-0xf8ffffff 64bit pref]
[ 0.413412] pci 0000:04:00.0: reg 20: [mem 0xf8ff8000-0xf8ffbfff 64bit pref]
[ 0.413455] pci 0000:04:00.0: supports D1 D2
[ 0.413460] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.413468] pci 0000:04:00.0: PME# disabled
[ 0.420109] pci 0000:00:1c.1: PCI bridge to [bus 04-04]
[ 0.420109] pci 0000:00:1c.1: bridge window [io 0xe000-0xefff]
[ 0.420109] pci 0000:00:1c.1: bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref]
[ 0.420109] pci 0000:03:00.0: [168c:002b] type 0 class 0x000280
[ 0.420109] pci 0000:03:00.0: reg 10: [mem 0xfbee0000-0xfbeeffff 64bit]
[ 0.420209] pci 0000:03:00.0: supports D1
[ 0.420214] pci 0000:03:00.0: PME# supported from D0 D1 D3hot D3cold
[ 0.420222] pci 0000:03:00.0: PME# disabled
[ 0.426655] pci 0000:00:1c.2: PCI bridge to [bus 03-03]
[ 0.426665] pci 0000:00:1c.2: bridge window [mem 0xfbe00000-0xfbefffff]
[ 0.426732] pci 0000:02:00.0: [10de:0a64] type 0 class 0x000300
[ 0.426751] pci 0000:02:00.0: reg 10: [mem 0xfa000000-0xfaffffff]
[ 0.426751] pci 0000:02:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.426751] pci 0000:02:00.0: reg 1c: [mem 0xce000000-0xcfffffff 64bit pref]
[ 0.426751] pci 0000:02:00.0: reg 24: [io 0xdc00-0xdc7f]
[ 0.426751] pci 0000:02:00.0: reg 30: [mem 0xfbd00000-0xfbd7ffff pref]
[ 0.426807] pci 0000:02:00.1: [10de:0be3] type 0 class 0x000403
[ 0.426826] pci 0000:02:00.1: reg 10: [mem 0xfbdfc000-0xfbdfffff]
[ 0.433441] pci 0000:00:1c.3: PCI bridge to [bus 02-02]
[ 0.433441] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
[ 0.433441] pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfbdfffff]
[ 0.433441] pci 0000:00:1c.3: bridge window [mem 0xce000000-0xdfffffff 64bit pref]
[ 0.433441] pci 0000:00:1e.0: PCI bridge to [bus 01-01] (subtractive decode)
[ 0.433441] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.433441] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.433444] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.433450] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 0.433457] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xdfffffff] (subtractive decode)
[ 0.433463] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfed8ffff] (subtractive decode)
[ 0.433488] pci_bus 0000:00: on NUMA node 0
[ 0.433497] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.433744] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 0.433826] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
[ 0.433880] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
[ 0.433934] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
[ 0.434045] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.434054] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.434058] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.446750] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 *15)
[ 0.446884] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 7 10 11 12 14 15)
[ 0.447001] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 *11 12 14 15)
[ 0.447117] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *10 11 12 14 15)
[ 0.447234] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 *4 5 7 10 11 12 14 15)
[ 0.447349] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 *7 10 11 12 14 15)
[ 0.447465] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 7 10 11 12 14 15)
[ 0.447582] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 *14 15)
[ 0.447741] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.447741] vgaarb: loaded
[ 0.447741] vgaarb: bridge control possible 0000:02:00.0
[ 0.447741] SCSI subsystem initialized
[ 0.447741] libata version 3.00 loaded.
[ 0.447741] usbcore: registered new interface driver usbfs
[ 0.447741] usbcore: registered new interface driver hub
[ 0.447741] usbcore: registered new device driver usb
[ 0.447741] PCI: Using ACPI for IRQ routing
[ 0.453899] PCI: pci_cache_line_size set to 64 bytes
[ 0.454003] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 0.454009] reserve RAM buffer: 000000007ffa0000 - 000000007fffffff
[ 0.454305] cfg80211: Calling CRDA to update world regulatory domain
[ 0.454371] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.463459] Switching to clocksource hpet
[ 0.463459] pnp: PnP ACPI init
[ 0.463479] ACPI: bus type pnp registered
[ 0.463728] pnp 00:00: [bus 00-ff]
[ 0.463734] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.463740] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.463745] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.463751] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.463756] pnp 00:00: [mem 0x000d0000-0x000dffff window]
[ 0.463762] pnp 00:00: [mem 0x80000000-0xdfffffff window]
[ 0.463768] pnp 00:00: [mem 0xf0000000-0xfed8ffff window]
[ 0.463860] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.463891] pnp 00:01: [mem 0xfed14000-0xfed19fff]
[ 0.463896] pnp 00:01: [mem 0xfed90000-0xfed93fff]
[ 0.463986] system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
[ 0.463993] system 00:01: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.464001] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.464077] pnp 00:02: [dma 4]
[ 0.464083] pnp 00:02: [io 0x0000-0x000f]
[ 0.464088] pnp 00:02: [io 0x0081-0x0083]
[ 0.464092] pnp 00:02: [io 0x0087]
[ 0.464097] pnp 00:02: [io 0x0089-0x008b]
[ 0.464105] pnp 00:02: [io 0x008f]
[ 0.464109] pnp 00:02: [io 0x00c0-0x00df]
[ 0.464161] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.464190] pnp 00:03: [io 0x0070-0x0071]
[ 0.464207] pnp 00:03: [irq 8]
[ 0.464262] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.464286] pnp 00:04: [io 0x0061]
[ 0.464340] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.464367] pnp 00:05: [io 0x00f0-0x00ff]
[ 0.464379] pnp 00:05: [irq 13]
[ 0.464434] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.464849] pnp 00:06: [io 0x0000-0xffffffffffffffff disabled]
[ 0.464856] pnp 00:06: [io 0x0a00-0x0a0f]
[ 0.464861] pnp 00:06: [io 0x0290-0x029f]
[ 0.464866] pnp 00:06: [io 0x0a20-0x0a2f]
[ 0.464870] pnp 00:06: [io 0x0a30-0x0a3f]
[ 0.464963] system 00:06: [io 0x0a00-0x0a0f] has been reserved
[ 0.464970] system 00:06: [io 0x0290-0x029f] has been reserved
[ 0.464976] system 00:06: [io 0x0a20-0x0a2f] has been reserved
[ 0.464982] system 00:06: [io 0x0a30-0x0a3f] has been reserved
[ 0.464989] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.465262] pnp 00:07: [io 0x0010-0x001f]
[ 0.465268] pnp 00:07: [io 0x0022-0x003f]
[ 0.465273] pnp 00:07: [io 0x0044-0x005f]
[ 0.465278] pnp 00:07: [io 0x0062-0x0063]
[ 0.465282] pnp 00:07: [io 0x0065-0x006f]
[ 0.465287] pnp 00:07: [io 0x0072-0x007f]
[ 0.465292] pnp 00:07: [io 0x0080]
[ 0.465296] pnp 00:07: [io 0x0084-0x0086]
[ 0.465301] pnp 00:07: [io 0x0088]
[ 0.465306] pnp 00:07: [io 0x008c-0x008e]
[ 0.465311] pnp 00:07: [io 0x0090-0x009f]
[ 0.465315] pnp 00:07: [io 0x00a2-0x00bf]
[ 0.465320] pnp 00:07: [io 0x00e0-0x00ef]
[ 0.465325] pnp 00:07: [io 0x04d0-0x04d1]
[ 0.465330] pnp 00:07: [io 0x0800-0x087f]
[ 0.465335] pnp 00:07: [io 0x0400-0x03ff disabled]
[ 0.465340] pnp 00:07: [io 0x0480-0x04bf]
[ 0.465345] pnp 00:07: [mem 0xfed1c000-0xfed1ffff]
[ 0.465350] pnp 00:07: [mem 0xfed20000-0xfed8ffff]
[ 0.465459] system 00:07: [io 0x04d0-0x04d1] has been reserved
[ 0.465466] system 00:07: [io 0x0800-0x087f] has been reserved
[ 0.465472] system 00:07: [io 0x0480-0x04bf] has been reserved
[ 0.465480] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.465487] system 00:07: [mem 0xfed20000-0xfed8ffff] has been reserved
[ 0.465494] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.465662] pnp 00:08: [mem 0xfed00000-0xfed003ff]
[ 0.465723] pnp 00:08: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.465942] pnp 00:09: [io 0x0060]
[ 0.465947] pnp 00:09: [io 0x0064]
[ 0.465953] pnp 00:09: [mem 0xfec00000-0xfec00fff]
[ 0.465958] pnp 00:09: [mem 0xfee00000-0xfee00fff]
[ 0.466048] system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.466055] system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.466063] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.466869] pnp 00:0a: Plug and Play ACPI device, IDs ITE8713 (disabled)
[ 0.467046] pnp 00:0b: [mem 0xe0000000-0xefffffff]
[ 0.467141] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.467150] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.467542] pnp 00:0c: [mem 0x00000000-0x0009ffff]
[ 0.467549] pnp 00:0c: [mem 0x000c0000-0x000cffff]
[ 0.467554] pnp 00:0c: [mem 0x000e0000-0x000fffff]
[ 0.467559] pnp 00:0c: [mem 0x00100000-0x7fffffff]
[ 0.467565] pnp 00:0c: [mem 0xfed90000-0xffffffff]
[ 0.467674] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.467681] system 00:0c: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.467688] system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.467695] system 00:0c: [mem 0x00100000-0x7fffffff] could not be reserved
[ 0.467702] system 00:0c: [mem 0xfed90000-0xffffffff] could not be reserved
[ 0.467709] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.468028] pnp: PnP ACPI: found 13 devices
[ 0.468032] ACPI: ACPI bus type pnp unregistered
[ 0.477773] PCI: max bus depth: 1 pci_try_num: 2
[ 0.477831] pci 0000:00:1c.2: BAR 9: assigned [mem 0x80000000-0x801fffff 64bit pref]
[ 0.477841] pci 0000:00:1c.2: BAR 7: assigned [io 0x1000-0x1fff]
[ 0.477849] pci 0000:00:1c.1: BAR 8: assigned [mem 0x80200000-0x805fffff]
[ 0.477858] pci 0000:00:1c.0: BAR 9: assigned [mem 0x80600000-0x807fffff 64bit pref]
[ 0.477866] pci 0000:00:1c.0: BAR 7: assigned [io 0x2000-0x2fff]
[ 0.477873] pci 0000:00:1c.0: PCI bridge to [bus 05-05]
[ 0.477879] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.477887] pci 0000:00:1c.0: bridge window [mem 0xfbf00000-0xfbffffff]
[ 0.477895] pci 0000:00:1c.0: bridge window [mem 0x80600000-0x807fffff 64bit pref]
[ 0.477904] pci 0000:00:1c.1: PCI bridge to [bus 04-04]
[ 0.477910] pci 0000:00:1c.1: bridge window [io 0xe000-0xefff]
[ 0.477918] pci 0000:00:1c.1: bridge window [mem 0x80200000-0x805fffff]
[ 0.477925] pci 0000:00:1c.1: bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref]
[ 0.477935] pci 0000:00:1c.2: PCI bridge to [bus 03-03]
[ 0.477940] pci 0000:00:1c.2: bridge window [io 0x1000-0x1fff]
[ 0.477948] pci 0000:00:1c.2: bridge window [mem 0xfbe00000-0xfbefffff]
[ 0.477956] pci 0000:00:1c.2: bridge window [mem 0x80000000-0x801fffff 64bit pref]
[ 0.477965] pci 0000:00:1c.3: PCI bridge to [bus 02-02]
[ 0.477971] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
[ 0.477979] pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfbdfffff]
[ 0.477987] pci 0000:00:1c.3: bridge window [mem 0xce000000-0xdfffffff 64bit pref]
[ 0.477996] pci 0000:00:1e.0: PCI bridge to [bus 01-01]
[ 0.478016] pci 0000:00:1c.0: enabling device (0106 -> 0107)
[ 0.478044] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.478052] pci 0000:00:1c.0: setting latency timer to 64
[ 0.478072] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.478079] pci 0000:00:1c.1: setting latency timer to 64
[ 0.478089] pci 0000:00:1c.2: enabling device (0106 -> 0107)
[ 0.478103] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.478111] pci 0000:00:1c.2: setting latency timer to 64
[ 0.478132] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.478139] pci 0000:00:1c.3: setting latency timer to 64
[ 0.478150] pci 0000:00:1e.0: setting latency timer to 64
[ 0.478157] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.478162] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.478168] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.478174] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.478179] pci_bus 0000:00: resource 8 [mem 0x80000000-0xdfffffff]
[ 0.478185] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff]
[ 0.478191] pci_bus 0000:05: resource 0 [io 0x2000-0x2fff]
[ 0.478197] pci_bus 0000:05: resource 1 [mem 0xfbf00000-0xfbffffff]
[ 0.478203] pci_bus 0000:05: resource 2 [mem 0x80600000-0x807fffff 64bit pref]
[ 0.478209] pci_bus 0000:04: resource 0 [io 0xe000-0xefff]
[ 0.478214] pci_bus 0000:04: resource 1 [mem 0x80200000-0x805fffff]
[ 0.478220] pci_bus 0000:04: resource 2 [mem 0xf8f00000-0xf8ffffff 64bit pref]
[ 0.478226] pci_bus 0000:03: resource 0 [io 0x1000-0x1fff]
[ 0.478232] pci_bus 0000:03: resource 1 [mem 0xfbe00000-0xfbefffff]
[ 0.478238] pci_bus 0000:03: resource 2 [mem 0x80000000-0x801fffff 64bit pref]
[ 0.478244] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
[ 0.478249] pci_bus 0000:02: resource 1 [mem 0xfa000000-0xfbdfffff]
[ 0.478255] pci_bus 0000:02: resource 2 [mem 0xce000000-0xdfffffff 64bit pref]
[ 0.478262] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7]
[ 0.478267] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff]
[ 0.478273] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.478278] pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.478284] pci_bus 0000:01: resource 8 [mem 0x80000000-0xdfffffff]
[ 0.478290] pci_bus 0000:01: resource 9 [mem 0xf0000000-0xfed8ffff]
[ 0.478444] NET: Registered protocol family 2
[ 0.478582] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.479216] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.481840] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.482473] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.482479] TCP reno registered
[ 0.482488] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.482518] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.482782] NET: Registered protocol family 1
[ 0.483063] RPC: Registered named UNIX socket transport module.
[ 0.483068] RPC: Registered udp transport module.
[ 0.483072] RPC: Registered tcp transport module.
[ 0.483076] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.483141] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.483162] pci 0000:00:1d.0: PCI INT A disabled
[ 0.483184] pci 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.483203] pci 0000:00:1d.1: PCI INT B disabled
[ 0.483218] pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.483236] pci 0000:00:1d.2: PCI INT C disabled
[ 0.483257] pci 0000:00:1d.3: PCI INT D -> GSI 22 (level, low) -> IRQ 22
[ 0.483276] pci 0000:00:1d.3: PCI INT D disabled
[ 0.483292] pci 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.483328] pci 0000:00:1d.7: PCI INT A disabled
[ 0.483387] pci 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.483419] pci 0000:05:00.0: PCI INT A disabled
[ 0.483453] pci 0000:02:00.0: Boot video device
[ 0.483473] PCI: CLS 32 bytes, default 64
[ 0.490500] microcode: CPU0 sig=0x106ca, pf=0x8, revision=0x107
[ 0.490520] microcode: CPU1 sig=0x106ca, pf=0x8, revision=0x107
[ 0.490538] microcode: CPU2 sig=0x106ca, pf=0x8, revision=0x107
[ 0.490557] microcode: CPU3 sig=0x106ca, pf=0x8, revision=0x107
[ 0.490628] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.492215] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.492687] fuse init (API version 7.17)
[ 0.492854] JFS: nTxBlock = 8192, nTxLock = 65536
[ 0.497141] SGI XFS with security attributes, large block/inode numbers, no debug enabled
[ 0.497815] msgmni has been set to 4005
[ 0.498806] alg: No test for stdrng (krng)
[ 0.498891] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.498898] io scheduler noop registered
[ 0.498946] io scheduler cfq registered (default)
[ 0.499100] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.499154] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 0.499247] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.499291] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[ 0.499371] pcieport 0000:00:1c.2: setting latency timer to 64
[ 0.499414] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
[ 0.499506] pcieport 0000:00:1c.3: setting latency timer to 64
[ 0.499549] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
[ 0.499753] intel_idle: MWAIT substates: 0x10
[ 0.499772] intel_idle: v0.4 model 0x1C
[ 0.499776] intel_idle: lapic_timer_reliable_states 0x2
[ 0.499992] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 0.500041] ACPI: Power Button [PWRB]
[ 0.500176] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.500184] ACPI: Power Button [PWRF]
[ 0.503712] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.677037] Linux agpgart interface v0.103
[ 0.680099] brd: module loaded
[ 0.681660] loop: module loaded
[ 0.682201] nbd: registered device at major 43
[ 0.685079] Loading iSCSI transport class v2.0-870.
[ 0.685287] iscsi: registered transport (tcp)
[ 0.685448] ahci 0000:00:1f.2: version 3.0
[ 0.685471] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.685546] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
[ 0.685625] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
[ 0.685633] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
[ 0.685641] ahci 0000:00:1f.2: setting latency timer to 64
[ 0.686684] scsi0 : ahci
[ 0.686937] scsi1 : ahci
[ 0.687102] scsi2 : ahci
[ 0.687267] scsi3 : ahci
[ 0.687573] ata1: SATA max UDMA/133 abar m1024@0xf9fffc00 port 0xf9fffd00 irq 44
[ 0.687581] ata2: SATA max UDMA/133 abar m1024@0xf9fffc00 port 0xf9fffd80 irq 44
[ 0.687586] ata3: DUMMY
[ 0.687590] ata4: DUMMY
[ 0.687945] tun: Universal TUN/TAP device driver, 1.6
[ 0.687950] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.688088] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 0.688093] e100: Copyright(c) 1999-2006 Intel Corporation
[ 0.688135] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[ 0.688140] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 0.688180] e1000e: Intel(R) PRO/1000 Network Driver - 1.5.1-k
[ 0.688184] e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
[ 0.688261] jme: JMicron JMC2XX ethernet driver version 1.0.8
[ 0.688374] r8168 Gigabit Ethernet driver 8.029.00-NAPI loaded
[ 0.688417] r8168 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.688444] r8168 0000:04:00.0: setting latency timer to 64
[ 0.688521] r8168 0000:04:00.0: irq 45 for MSI/MSI-X
[ 0.688755] eth%d: RTL8168E/8111E at 0xffffc9000001e000, c8:60:00:42:a5:57, IRQ 45
[ 0.832797] r8168: This product is covered by one or more of the following patents: US5,307,459, US5,434,872, US5,732,094, US6,570,884, US6,115,776, and US6,327,625.
[ 0.832805] eth0: Identified chip type is 'RTL8168E/8111E'.
[ 0.832810] r8168 Copyright (C) 2012 Realtek NIC software team <nicfae@realtek.com>
[ 0.832813] This program comes with ABSOLUTELY NO WARRANTY; for details, please see <http://www.gnu.org/licenses/>.
[ 0.832816] This is free software, and you are welcome to redistribute it under certain conditions; see <http://www.gnu.org/licenses/>.
[ 0.832874] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.832914] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.832937] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.832944] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.832958] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 0.832993] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 0.833006] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.836902] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 0.837015] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf9fff800
[ 0.850037] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.850344] hub 1-0:1.0: USB hub found
[ 0.850355] hub 1-0:1.0: 8 ports detected
[ 0.850535] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.850573] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.850651] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.850666] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.850673] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.850686] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.850795] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b880
[ 0.851104] hub 2-0:1.0: USB hub found
[ 0.851115] hub 2-0:1.0: 2 ports detected
[ 0.851248] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.851261] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.851267] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.851282] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 0.851405] uhci_hcd 0000:00:1d.1: irq 21, io base 0x0000bc00
[ 0.851708] hub 3-0:1.0: USB hub found
[ 0.851719] hub 3-0:1.0: 2 ports detected
[ 0.851844] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.851857] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.851863] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.851876] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 0.851992] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c000
[ 0.852302] hub 4-0:1.0: USB hub found
[ 0.852312] hub 4-0:1.0: 2 ports detected
[ 0.852438] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 22 (level, low) -> IRQ 22
[ 0.852451] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 0.852457] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 0.852470] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 0.852591] uhci_hcd 0000:00:1d.3: irq 22, io base 0x0000c080
[ 0.852893] hub 5-0:1.0: USB hub found
[ 0.852903] hub 5-0:1.0: 2 ports detected
[ 0.853050] Initializing USB Mass Storage driver...
[ 0.853121] usbcore: registered new interface driver usb-storage
[ 0.853125] USB Mass Storage support registered.
[ 0.853240] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.853897] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.853917] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.854140] mousedev: PS/2 mouse device common for all mice
[ 0.854592] rtc_cmos 00:03: RTC can wake from S4
[ 0.854777] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.854866] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.854898] i2c /dev entries driver
[ 0.854972] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.854981] ACPI: resource 0000:00:1f.3 [io 0x0400-0x041f] conflicts with ACPI region SMRG [io 0x400-0x40f]
[ 0.854986] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 0.855163] lirc_dev: IR Remote Control driver registered, major 252
[ 0.855169] IR NEC protocol handler initialized
[ 0.855172] IR RC5(x) protocol handler initialized
[ 0.855176] IR RC6 protocol handler initialized
[ 0.855179] IR JVC protocol handler initialized
[ 0.855182] IR Sony protocol handler initialized
[ 0.855186] IR RC5 (streamzap) protocol handler initialized
[ 0.855189] IR MCE Keyboard/mouse protocol handler initialized
[ 0.855384] cpuidle: using governor ladder
[ 0.855660] cpuidle: using governor menu
[ 0.855665] EFI Variables Facility v0.08 2004-May-17
[ 0.855669] No iBFT detected.
[ 0.856336] usbcore: registered new interface driver usbhid
[ 0.856341] usbhid: USB HID core driver
[ 0.856464] Netfilter messages via NETLINK v0.30.
[ 0.856910] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 0.856952] TCP cubic registered
[ 0.857104] NET: Registered protocol family 10
[ 0.858266] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 0.858298] NET: Registered protocol family 17
[ 0.858325] lib80211: common routines for IEEE802.11 drivers
[ 0.858330] lib80211_crypt: registered algorithm 'NULL'
[ 0.858335] Registering the dns_resolver key type
[ 0.859335] rtc_cmos 00:03: setting system clock to 2012-08-17 09:08:38 UTC (1345194518)
[ 1.006708] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.006740] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.055222] ata1.00: ATA-8: TOSHIBA MK3259GSXP, GN003J, max UDMA/100
[ 1.055230] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.056097] ata1.00: configured for UDMA/100
[ 1.056349] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK3259GS GN00 PQ: 0 ANSI: 5
[ 1.056790] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.056808] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 1.056815] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.057015] sd 0:0:0:0: [sda] Write Protect is off
[ 1.057022] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.057101] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.105061] sda: sda1 sda2
[ 1.105768] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.115522] Freeing unused kernel memory: 4364k freed
[ 1.118401] Write protecting the kernel read-only data: 8192k
[ 1.130061] Freeing unused kernel memory: 1432k freed
[ 1.134098] Freeing unused kernel memory: 380k freed
[ 1.238626] uvesafb: NVIDIA Corporation, GT218 Board - 06930002, Chip Rev , OEM: NVIDIA, VBE v3.0
[ 1.263381] usb 1-4: new high-speed USB device number 4 using ehci_hcd
[ 1.330019] uvesafb: VBIOS/hardware doesn't support DDC transfers
[ 1.330028] uvesafb: no monitor limits have been set, default refresh rate will be used
[ 1.330738] uvesafb: scrolling: redraw
[ 1.472226] Console: switching to colour frame buffer device 80x30
[ 1.475529] uvesafb: framebuffer at 0xcf000000, mapped to 0xffffc90010680000, using 10240k, total 14336k
[ 1.475535] fb0: VESA VGA frame buffer device
[ 1.478196] xhci_hcd 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.478231] xhci_hcd 0000:05:00.0: setting latency timer to 64
[ 1.478239] xhci_hcd 0000:05:00.0: xHCI Host Controller
[ 1.478254] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 6
[ 1.478560] xhci_hcd 0000:05:00.0: irq 16, io mem 0xfbffe000
[ 1.478701] xhci_hcd 0000:05:00.0: irq 46 for MSI/MSI-X
[ 1.478717] xhci_hcd 0000:05:00.0: irq 47 for MSI/MSI-X
[ 1.478731] xhci_hcd 0000:05:00.0: irq 48 for MSI/MSI-X
[ 1.478743] xhci_hcd 0000:05:00.0: irq 49 for MSI/MSI-X
[ 1.478756] xhci_hcd 0000:05:00.0: irq 50 for MSI/MSI-X
[ 1.479431] xHCI xhci_add_endpoint called for root hub
[ 1.479436] xHCI xhci_check_bandwidth called for root hub
[ 1.479506] hub 6-0:1.0: USB hub found
[ 1.479520] hub 6-0:1.0: 2 ports detected
[ 1.479648] xhci_hcd 0000:05:00.0: xHCI Host Controller
[ 1.479659] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 7
[ 1.482065] xHCI xhci_add_endpoint called for root hub
[ 1.482069] xHCI xhci_check_bandwidth called for root hub
[ 1.482136] hub 7-0:1.0: USB hub found
[ 1.482150] hub 7-0:1.0: 2 ports detected
[ 1.490044] Refined TSC clocksource calibration: 1795.563 MHz.
[ 1.490054] Switching to clocksource tsc
[ 1.493371] usb 1-6: new high-speed USB device number 5 using ehci_hcd
[ 1.622238] scsi4 : usb-storage 1-6:1.0
[ 1.650279] EXT4-fs (sda1): couldn't mount as ext3 due to feature incompatibilities
[ 1.686917] EXT4-fs (sda1): couldn't mount as ext2 due to feature incompatibilities
[ 1.726712] usb 1-8: new high-speed USB device number 6 using ehci_hcd
[ 1.749391] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 1.852892] scsi5 : usb-storage 1-8:1.0
[ 2.076702] usb 2-1: new low-speed USB device number 2 using uhci_hcd
[ 2.150269] EXT4-fs (sda2): couldn't mount as ext3 due to feature incompatibilities
[ 2.166970] EXT4-fs (sda2): couldn't mount as ext2 due to feature incompatibilities
[ 2.371361] input: USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input2
[ 2.371614] generic-usb 0003:04D9:1503.0001: input,hidraw0: USB HID v1.10 Keyboard [ USB Keyboard] on usb-0000:00:1d.0-1/input0
[ 2.461005] input: USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.1/input/input3
[ 2.461257] generic-usb 0003:04D9:1503.0002: input,hidraw1: USB HID v1.10 Device [ USB Keyboard] on usb-0000:00:1d.0-1/input1
[ 2.624813] scsi 4:0:0:0: Direct-Access Generic STORAGE DEVICE 0206 PQ: 0 ANSI: 0
[ 2.626191] sd 4:0:0:0: Attached scsi generic sg1 type 0
[ 2.627535] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 2.686706] usb 3-1: new low-speed USB device number 2 using uhci_hcd
[ 2.854927] scsi 5:0:0:0: CD-ROM Optiarc DVD RW AD-7690H 1.00 PQ: 0 ANSI: 0
[ 2.860042] sr0: scsi3-mmc drive: 10x/24x writer dvd-ram cd/rw xa/form2 cdda caddy
[ 2.860049] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.860310] sr 5:0:0:0: Attached scsi CD-ROM sr0
[ 2.860532] sr 5:0:0:0: Attached scsi generic sg2 type 5
[ 2.881863] input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input4
[ 2.882147] generic-usb 0003:093A:2510.0003: input,hidraw2: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:1d.1-1/input0
[ 2.957978] EXT4-fs (sda2): recovery complete
[ 2.958172] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
>[ 3.665627] systemd-udevd[229]: starting version 187
[ 3.879904] coretemp coretemp.0: Using relative temperature scale!
[ 3.879938] coretemp coretemp.0: Using relative temperature scale!
[ 3.902329] ite-cir 00:0a: [io 0x02f8-0x02ff]
[ 3.905136] ite-cir 00:0a: [irq 5]
[ 3.909038] ite-cir 00:0a: activated
[ 3.909063] ite_cir: Auto-detected model: ITE8713 CIR transceiver
[ 3.909069] ite_cir: Using model: ITE8713 CIR transceiver
[ 3.909077] ite_cir: TX-capable: 1
[ 3.909082] ite_cir: Sample period (ns): 8680
[ 3.909087] ite_cir: TX carrier frequency (Hz): 38000
[ 3.909092] ite_cir: TX duty cycle (%): 33
[ 3.909097] ite_cir: RX low carrier frequency (Hz): 0
[ 3.909102] ite_cir: RX high carrier frequency (Hz): 0
[ 3.910889] Registered IR keymap rc-rc6-mce
[ 3.911647] input: ITE8713 CIR transceiver as /devices/virtual/rc/rc0/input5
[ 3.911999] rc0: ITE8713 CIR transceiver as /devices/virtual/rc/rc0
[ 3.912477] input: MCE IR Keyboard/Mouse (ite-cir) as /devices/virtual/input/input6
[ 3.912758] ite_cir: driver has been successfully loaded
[ 4.128035] dw2102: su3000_identify_state
[ 4.128039]
[ 4.128046] dvb-usb: found a 'Terratec Cinergy S2 USB HD Rev.2' in warm state.
[ 4.128091] dw2102: su3000_power_ctrl: 1, initialized 0
[ 4.128094]
[ 4.128755] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[ 4.129793] DVB: registering new adapter (Terratec Cinergy S2 USB HD Rev.2)
[ 4.134711] dvb-usb: MAC address: ff:ff:ff:ff:ff:ff
[ 4.159320] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 4.159430] snd_hda_intel 0000:00:1b.0: irq 51 for MSI/MSI-X
[ 4.161067] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 4.390967] Invalid probe, probably not a DS3000
[ 4.390983] dvb-usb: no frontend was attached by 'Terratec Cinergy S2 USB HD Rev.2'
[ 4.391385] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.7/usb1/1-4/input/input7
[ 4.391532] dvb-usb: schedule remote query interval to 150 msecs.
[ 4.391542] dw2102: su3000_power_ctrl: 0, initialized 1
[ 4.391545]
[ 4.391550] dvb-usb: Terratec Cinergy S2 USB HD Rev.2 successfully initialized and connected.
[ 4.391642] usbcore: registered new interface driver dw2102
[ 4.608847] ath9k 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 4.608867] ath9k 0000:03:00.0: setting latency timer to 64
[ 4.658915] ath: EEPROM regdomain: 0x60
[ 4.658921] ath: EEPROM indicates we should expect a direct regpair map
[ 4.658929] ath: Country alpha2 being used: 00
[ 4.658933] ath: Regpair used: 0x60
[ 4.662132] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
[ 4.664299] Registered led device: ath9k-phy0
[ 4.664318] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffc90012420000, irq=18
[ 4.770961] r8168: eth0: link down
[ 4.771693] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 5.175495] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 5.405574] nvidia: module license 'NVIDIA' taints kernel.
[ 5.405581] Disabling lock debugging due to kernel taint
[ 5.432861] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 5.433380] snd_hda_intel 0000:02:00.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 5.433399] hda_intel: Disabling MSI
[ 5.433567] snd_hda_intel 0000:02:00.1: setting latency timer to 64
[ 6.309998] r8168: eth0: link up
[ 6.310738] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 6.513427] HDMI status: Codec=0 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 6.540069] HDMI status: Codec=1 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 6.566737] HDMI status: Codec=2 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 6.593409] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 6.607079] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1c.3/0000:02:00.1/sound/card1/input9
[ 6.607441] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1c.3/0000:02:00.1/sound/card1/input10
[ 6.607748] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1c.3/0000:02:00.1/sound/card1/input11
[ 6.608058] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1c.3/0000:02:00.1/sound/card1/input12
[ 6.609588] nvidia 0000:02:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 6.609614] nvidia 0000:02:00.0: setting latency timer to 64
[ 6.609626] vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+mem,decodes=nonewns=io+mem
[ 6.610472] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 295.71 Thu Aug 2 19:22:08 PDT 2012
[ 6.776697] r8168: eth0: link up
[ 11.222286] EXT4-fs (sda1): re-mounted. Opts: barrier=1,stripe=4,data=ordered,commit=0
[ 11.441942] EXT4-fs (sda2): re-mounted. Opts: barrier=1,data=ordered,commit=0
[ 18.016687] eth0: no IPv6 routers present

 

[ripblade]

Could you please post a full "dmesg" output ?

Little update: some people @ LinuxTV.org website are working to support this kind of devices
I don't know the state-of-the-art but I will verify shortly if there is the possibility to use it on our boxes.

Any news on that USB DVB S2 device? Is it worth the gamble to buy it?

 

[ripblade]

Could you please post a full "dmesg" output ?

Little update: some people @ LinuxTV.org website are working to support this kind of devices
I don't know the state-of-the-art but I will verify shortly if there is the possibility to use it on our boxes.

Alright angleofsky1980 happy new year!
Quick question when ya have the time,
I have a winTV t stick was working fine, I bought a tevii S2 USB tuner its working spot on on my Duo BH1.79 but now it does not recognise my DVB-T stick can the Duo only allow one USB tuner at a time?

 

[angelofsky1980]

Alright angleofsky1980 happy new year!
Quick question when ya have the time,
I have a winTV t stick was working fine, I bought a tevii S2 USB tuner its working spot on on my Duo BH1.79 but now it does not recognise my DVB-T stick can the Duo only allow one USB tuner at a time?

Some driver combinations are very unstable
My AC power for teVii is broken and I need to replace it before do some tests
You can try to use an external powered hub USB .... can be a power problem if you use the two rear ports for USB tuners.

 

[ripblade]

Some driver combinations are very unstable
My AC power for teVii is broken and I need to replace it before do some tests
You can try to use an external powered hub USB .... can be a power problem if you use the two rear ports for USB tuners.

Yep I think I may of mentioned this before but my USB ports don't respond to anything unless the devices have their own power supply that's an on going problem and I haven't got a clue how to fix it unless some one has an answer
So both S2 and DVBT tuners have their own power supply both it will only identify one at a time!

 

[ripblade]

sorry double post!

 

[angelofsky1980]

Yep I think I may of mentioned this before but my USB ports don't respond to anything unless the devices have their own power supply that's an on going problem and I haven't got a clue how to fix it unless some one has an answer
So both S2 and DVBT tuners have their own power supply both it will only identify one at a time!

What DVB-T device do you have?

 

[ripblade]

What DVB-T device do you have?

Sorry for the late the device are hauppauge WinTV NOVA-T (RTE 2 HD very glitchy when it did work) and your Excelent recommend Tevii DVB-S/S2 TV Tuner for PC.