BlackHole Vu+ Duo 1.6.6

Status
Not open for further replies.
Matrix10 said:
Is possible but you will not have fix for remote plugin.
You can install first Rihanna5 V3 with fix and after any other skin.
Click to expand...

Thanks Matrix10.

Where can I find the old Beyonce 14 skin from 1.6.5?

P.S.: sorry for the double post.
 
the matrix said:
Great Job, 1000x thanks
But still my CEC does not work in the picture on this site i see current CEC address 1.0.0.0 on my Vu+ it is f.f.f.f. ????
Click to expand...

Try again
Try to get the correct address of the CEC for your TV
restart image and in your HDMI TV setup
(In mu sony I have Device List Update and HDMI Device List search option
MY Sony bravia have find VUUNO)
When you have good code
Use a fixed address in the CEC Setup
(For sony bravia i use also Wakeup signal from the TV set to OSD name request
so I can use remote from sony and from VUuno for Standby and wakeup)
 

Attachments

  • shot1.jpg
    shot1.jpg
    81.1 KB · Views: 49
Cybergal said:
With yellow Button ( Internet Browser ) open the virtual Keyboard = works ?
Click to expand...

Is working I have test on VU Uno i think is the same with VUduo.
Of course you have to be on the field that requires text.
Or not im not sure for VUduo

I have test now with VUDuo and is working
 
Still not working, TV is a Samsung Ue40C6000 Anynet installed as described Anynet = on
Automatic switch of f->yes
Device list : nothing found renew it and still nothing found.
current CEC address in VU still f.f.f.f.
 
javier007 said:
Hi:
after update boot it shows me this:

dev: size erasesize name
mtd0: 07600000 00020000 "rootfs"
mtd1: 00400000 00020000 "kernel"
mtd2: 00400000 00020000 "boot"
mtd3: 00100000 00020000 "cfe"
mtd4: 00080000 00020000 "mac"
mtd5: 00080000 00020000 "env"
mtd6: 00100000 00020000 "nvm"

but after update image it puts:

dev: size erasesize name
mtd0: 07600000 00020000 "rootfs"
mtd1: 00400000 00020000 "kernel"
mtd2: 00200000 00020000 "boot"
mtd3: 00100000 00020000 "cfe"
mtd4: 00080000 00020000 "mac"
mtd5: 00080000 00020000 "env"
mtd6: 00100000 00020000 "nvm"

it´s normal the value of mtd2??or i have to do anything more...

thanks in advance..
Click to expand...


so then everything is fine with this value of mtd2?

thanks...
 
javier007 said:
so then everything is fine with this value of mtd2?

thanks...
Click to expand...

Yes, before update the values are:

mtd1: 00200000 00020000 "kernel"
mtd2: 00200000 00020000 "boot"

And after update the values are:

mtd1: 00400000 00020000 "kernel"
mtd2: 00400000 00020000 "boot"
 
After image update the Bootloader Rev. 3.0 is like this:

- Increase the update usb file size to 128M Bytes
- Change the flash memory map(kernel size : 4M, /boot : 2M)
 
biscamax said:
Yes, before update the values are:

mtd1: 00200000 00020000 "kernel"
mtd2: 00200000 00020000 "boot"

And after update the values are:

mtd1: 00400000 00020000 "kernel"
mtd2: 00400000 00020000 "boot"
Click to expand...


thanks biscamax for your reply...

but my question was little diferent,after update boot the stb shows me this and i know it´s ok for other posts:
mtd1: 00400000 00020000 "kernel"
mtd2: 00400000 00020000 "boot"

but when i update the image after update boot it puts this:
mtd1: 00400000 00020000 "kernel"
mtd2: 00200000 00020000 "boot"

is it fine this mtd2 value when i have updated BH 1.6.6??

i hope it is the size of the new image thats change that value but i would want a confirmation of it´s ok...

regards...
 
javier007 said:
but when i update the image after update boot it puts this:
mtd1: 00400000 00020000 "kernel"
mtd2: 00200000 00020000 "boot"

is it fine this mtd2 value when i have updated BH 1.6.6??
Click to expand...
I have a same values after I flashed Image and I would like to know too !!!
 
Status
Not open for further replies.
Back
Top