USB Tuner: SMSUSB devices

Status
Not open for further replies.
L

Largirucho

Vu+ Newbie
Hello, thank you very much in advance I have a usb nano hdtv real npg brand with the chip and board sms2270 RD1140m places, know any driver. Could it work in my vu + image only with BH.

Thank you very much and sorry for my bad English.
 
sakisdvb

sakisdvb

BH Lover
I have re-flashed Solo to 1.6.5 installed smsusb driver from server.
I have removed USB-HUB install DVB-T stick directly to receiver,
reinstall driver Green button..... Sorry no supported device found....

Rebooted/re-flashed/rebooted/............ The DVB-T stick
not recognized with latest driver.

Regards.
 
angelofsky1980

angelofsky1980

BlackHole Driver Specialist
sakisdvb said:
I have re-flashed Solo to 1.6.5 installed smsusb driver from server.
I have removed USB-HUB install DVB-T stick directly to receiver,
reinstall driver Green button..... Sorry no supported device found....

Rebooted/re-flashed/rebooted/............ The DVB-T stick
not recognized with latest driver.

Regards.
Click to expand...

I need the output of "dmesg" after the message "No supported device found" and BH 1.6.6.
 
sakisdvb

sakisdvb

BH Lover
- Connected to me box via telnet
- I Did the command dmesg > /tmp/dmesg.txt
- I have attached the file located in /tmp of my receiver, called dmesg.txt
 

Attachments

  • dmesg.txt
    14.7 KB · Views: 6
angelofsky1980

angelofsky1980

BlackHole Driver Specialist
sakisdvb said:
Hello.
Any News?
Click to expand...

Please disable DVB-T tuner into USB Tuner panel (if results enabled of course) and re-select "Hauppauge Ministick" driver from drivers list.

I've tested my Solo with Ministick (SMSUSB driver) and it's correctly detected. For security only I've re-uploaded SMSUSB driver for all Vu+ boxes on server.

This is a screenshot of my Solo:
solo_tuner_info.png
 
el_zari

el_zari

BH Lover
VuUNo...Bh 1.6.6, FPGA updated, etc....

...Sorry no supported device found......

Any ideas?

Thanks Angelo!
 

Attachments

  • log.txt
    29.6 KB · Views: 3
angelofsky1980

angelofsky1980

BlackHole Driver Specialist
el_zari said:
VuUNo...Bh 1.6.6, FPGA updated, etc....

...Sorry no supported device found......

Any ideas?

Thanks Angelo!
Click to expand...

On Uno we are already working to try to solve the problem.
On my Solo and Duo the Ministick works regularly but on our friend sakisdvb has detected the same problem of your Uno on his Solo :(
 
sakisdvb

sakisdvb

BH Lover
angelofsky1980 said:
Could you please make this little test?
Flash a new 1.6.6 image
Configure LAN, install DVB-T Ministick Driver and afr this make all other config you want.....
Click to expand...
Ofcourse dear Angelo.
But not tonight, my kids were very active. I am exhausted.
Besides i am having suspensions about the DVB-T stick condition.
I will test further the next days.
Thank you very much.

P.S.
My TV Samsung LE40M86BD does not connect with Receiver after Updated to 1.6.6
Receiver turns off if i set TV to Stby. If i turn on TV the Receiver stays Off.
 
angelofsky1980

angelofsky1980

BlackHole Driver Specialist
sakisdvb said:
Ofcourse dear Angelo.
But not tonight, my kids were very active. I am exhausted.
Besides i am having suspensions about the DVB-T stick condition.
I will test further the next days.
Thank you very much.

P.S.
My TV Samsung LE40M86BD does not connect with Receiver after Updated to 1.6.6
Receiver turns off if i set TV to Stby. If i turn on TV the Receiver stays Off.
Click to expand...

Thanks for your patience for DVB-T.
I will test tomorrow the HDMI-CEC part of Solo.
 
sakisdvb

sakisdvb

BH Lover
Dear Angelo.
I have tested my stick at 2 different Windows PCs.
No problem found. Stick is recognized correctly and drivers install OK.
Channels scan fine and plays OK.
ON my VU+ Solo Receiver stick is not recognized. :lamo:

- Remove All USB devices.
- Flashed 1.6.6
- Booted
- Installed LAN and DVB-T Stick
- Rebooted
- install Driver
- Enable tuner
- Error message .. Sorry no supported device found ....
- Hard Restart
- Enable tuner
- Error message .. Sorry no supported device found ....
-Power off reciver (Remove 220V/AC cable)
- Enable tuner
- Error message .. Sorry no supported device found ....
- Extract Dmesg-1.6.6.txt

- Remove All USB devices.
- Flashed 1.6.5
- Booted
- Installed LAN and DVB-T Stick
- Rebooted
- install Driver
- Enable tuner
- Error message .. Sorry no supported device found ....
. e
. t
. c
. .
-Extract Dmesg-1.6.5.txt

Before installing new image Stick was working Perfectly. :confused:

Regards.
 

Attachments

  • dmesg-1.6.6.txt
    11.6 KB · Views: 3
  • dmesg-1.6.5.txt
    11.7 KB · Views: 1
angelofsky1980

angelofsky1980

BlackHole Driver Specialist
sakisdvb said:
Dear Angelo.
I have tested my stick at 2 different Windows PCs.
No problem found. Stick is recognized correctly and drivers install OK.
Channels scan fine and plays OK.
ON my VU+ Solo Receiver stick is not recognized. :lamo:

- Remove All USB devices.
- Flashed 1.6.6
- Booted
- Installed LAN and DVB-T Stick
- Rebooted
- install Driver
- Enable tuner
- Error message .. Sorry no supported device found ....
- Hard Restart
- Enable tuner
- Error message .. Sorry no supported device found ....
-Power off reciver (Remove 220V/AC cable)
- Enable tuner
- Error message .. Sorry no supported device found ....
- Extract Dmesg-1.6.6.txt

- Remove All USB devices.
- Flashed 1.6.5
- Booted
- Installed LAN and DVB-T Stick
- Rebooted
- install Driver
- Enable tuner
- Error message .. Sorry no supported device found ....
. e
. t
. c
. .
-Extract Dmesg-1.6.5.txt

Before installing new image Stick was working Perfectly. :confused:

Regards.
Click to expand...
Interesting errors.....
For your problem I will publish new driver package within 1 hour.


Sent from my iPhone using Tapatalk
 
Status
Not open for further replies.
Top