Problem with my new PCTV (systems) nanoStick T2 (290e)

PCTV systems nanostick T2 290e
Blackhole 2.0.6 ( VU+ Ultimo )
Minor issue (possible driver related):

Some, channels is not found when scanning.
Dont know how many.
But i know that 4 of my favorite DVB-T channels is not found, in spite of the frequency exists in the terrestrial.xml file.

I have to insert the channels manually via dreambox edit, and transfer them to the box.

The manually inserted channels is working (Tuning OK).

<terrestrial name="Europe, Middle East, Africa: DVB-T Frequencies" flags="5">
<transponder centre_frequency="570000000" bandwidth="0" constellation="3"/>
NotFoundWhenScanning.jpg

Best Regards
 
scan works OK for me, BUT

WTF, 206 reverted back to this "must restart GUI" after powercycle or reboot.
Discovered a couple of days ago.

back to 205B, With latest of :
drivers, transcode, skin, owif.

and everythong OK again, must be kinda timing issue I still guess
 
I have the same USB above, and the same problem on VU+ Solo2, tested on blackhole 2.05-2.06, first says, scan failed, after I find out and installed the dvbmodules etc, but on reboot it come up tuner failed, this is crazy, please help me, thanks.
 
Ohlala said:
I have the same USB above, and the same problem on VU+ Solo2, tested on blackhole 2.05-2.06, first says, scan failed, after I find out and installed the dvbmodules etc, but on reboot it come up tuner failed, this is crazy, please help me, thanks.
Click to expand...

Check your DVB-T area settings (Australia, Africa, Europe,... or where you live) and your antenna signal.
 
paolino said:
Check your DVB-T area settings (Australia, Africa, Europe,... or where you live) and your antenna signal.
Click to expand...

Ah, no no my friend I had tones of receivers tested by me, Is not the point to mention here, all settings are good !!!!! 1000%, the problem is with dvb modules, as when I install this driver dvb module work fine, BUT IT DOES NOT GET IN TO ROT, I tried force install etc, but does not get installed, after all it still show Grey, I am not very happy with this to buy expensive box like this, and you the team not to be able to sort this out is no good, even cheap DM800 HD works 100% with this tested by me, I THINK YOU NEED TO LOOK IN TO DVB-MODULES, that what I think any way, I am not software developer, thanks for helping me.
 
Ohlala said:
Ah, no no my friend I had tones of receivers tested by me, Is not the point to mention here, all settings are good !!!!! 1000%, the problem is with dvb modules, as when I install this driver dvb module work fine, BUT IT DOES NOT GET IN TO ROT, I tried force install etc, but does not get installed, after all it still show Grey, I am not very happy with this to buy expensive box like this, and you the team not to be able to sort this out is no good, even cheap DM800 HD works 100% with this tested by me, I THINK YOU NEED TO LOOK IN TO DVB-MODULES, that what I think any way, I am not software developer, thanks for helping me.
Click to expand...

Please, don't shoot by writting in Capitals. And for helping you, we need this: http://www.vuplus-community.net/board/threads/usb-tuner-howto-report-problems.621/
 
Tested the above USB with 3 Different Images, Blackhole, OpenPli, VIX, Only with VIX works 100%, do not know why, but you need to look into this, if it work with one image perfect, then it should work with others is well????, Regards!!!!!!!!!!
 
Ohlala said:
Tested the above USB with 3 Different Images, Blackhole, OpenPli, VIX, Only with VIX works 100%, do not know why, but you need to look into this, if it work with one image perfect, then it should work with others is well????, Regards!!!!!!!!!!
Click to expand...

LOL
BH uses LATEST USB DVB drivers. Vix NO.
End of story.

You can post here a diagnostic file and we will see what happen
 
angelofsky1980 said:
LOL
BH uses LATEST USB DVB drivers. Vix NO.
End of story.

You can post here a diagnostic file and we will see what happen
Click to expand...

Blackhole image is the best, do not take this personally, that why I ask for this to be fixed?????, so I can go back to Blackhole, but the above USB does not work, it says scan failed, I find on TS Panel Addons Imajteam addons server drivers, there is file called Vuplus-dvb modules, it is the last line for VU+ Solo2, I install that one, reboot, all good now the tuner start scanning and I get all the channels, but when reboot, the channels get lost, so I need to do the same thing again, with VIX, I nstalled the driver, and perfect it come up as DVB-T2 USB, DVB-C, you can use either, thanks!!!!!!!!!
 
Ohlala said:
Blackhole image is the best, do not take this personally, that why I ask for this to be fixed?????, so I can go back to Blackhole, but the above USB does not work, it says scan failed, I find on TS Panel Addons Imajteam addons server drivers, there is file called Vuplus-dvb modules, it is the last line for VU+ Solo2, I install that one, reboot, all good now the tuner start scanning and I get all the channels, but when reboot, the channels get lost, so I need to do the same thing again, with VIX, I nstalled the driver, and perfect it come up as DVB-T2 USB, DVB-C, you can use either, thanks!!!!!!!!!
Click to expand...

Please, Read Forum Rules. No panels here.
 
Ohlala said:
Blackhole image is the best, do not take this personally, that why I ask for this to be fixed?????, so I can go back to Blackhole, but the above USB does not work, it says scan failed, I find on TS Panel Addons Imajteam addons server drivers, there is file called Vuplus-dvb modules, it is the last line for VU+ Solo2, I install that one, reboot, all good now the tuner start scanning and I get all the channels, but when reboot, the channels get lost, so I need to do the same thing again, with VIX, I nstalled the driver, and perfect it come up as DVB-T2 USB, DVB-C, you can use either, thanks!!!!!!!!!
Click to expand...

Can you explain what box do you have and in which manner is connected to box?
I will simulate your situation and see what happen
 
It is Vu+ Solo2, I have the USB Connected with the USB cable to Box, at the moment I am using VIX works fine with that, but it was the same with Blackhole, I was trying to fixit for few days, no luck, after I change image, sorry maybe this is to much for you, if you have one of those USB as mine, you can test yourself, because this is the only one that support DVB-T2, thanks.
 
Ohlala said:
It is Vu+ Solo2, I have the USB Connected with the USB cable to Box, at the moment I am using VIX works fine with that, but it was the same with Blackhole, I was trying to fixit for few days, no luck, after I change image, sorry maybe this is to much for you, if you have one of those USB as mine, you can test yourself, because this is the only one that support DVB-T2, thanks.
Click to expand...

I've bought PCTV 290e the year Vu+ releases Vu+Ultimo box.
 
My status

OK 205b with new drivers and also before.
NOK 206c with new drivers, must restart E2 to get USB-tuner to work after powercycle/reboot.

So I'm stay put on 205b
 
You must log in or register to reply here.
Back
Top