USB Tuner: AF9015 devices

Status
Not open for further replies.
P

papi1962

Vu+ Newbie
After i install Blach hole 144 my usb tuner is not working - could not find any channel Previous version vas Blach hole 137 and usb tuner works

dvb-usb: found a 'Afatech AF9015 DVB-T USB2.0 stick' in cold state, will try to load a firmware
dvb-usb: downloading firmware from file 'dvb-usb-af9015.fw'
dvb-usb: found a 'Afatech AF9015 DVB-T USB2.0 stick' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
DVB: registering new adapter (Afatech AF9015 DVB-T USB2.0 stick)
af9013: firmware version:5.1.0
DVB: registering adapter 1 frontend 0 (Afatech AF9013 DVB-T)...
NXP TDA18218(LD) successfully identified.
dvb-usb: Afatech AF9015 DVB-T USB2.0 stick successfully initialized and connected.
usbcore: registered new driver dvb_usb_af9015
DVB: registering adapter 0 frontend 0 (Afatech AF9013 DVB-T)...
 
angelofsky1980

angelofsky1980

BlackHole Driver Specialist
papi1962 said:
After i install Blach hole 144 my usb tuner is not working - could not find any channel Previous version vas Blach hole 137 and usb tuner works

dvb-usb: found a 'Afatech AF9015 DVB-T USB2.0 stick' in cold state, will try to load a firmware
dvb-usb: downloading firmware from file 'dvb-usb-af9015.fw'
dvb-usb: found a 'Afatech AF9015 DVB-T USB2.0 stick' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
DVB: registering new adapter (Afatech AF9015 DVB-T USB2.0 stick)
af9013: firmware version:5.1.0
DVB: registering adapter 1 frontend 0 (Afatech AF9013 DVB-T)...
NXP TDA18218(LD) successfully identified.
dvb-usb: Afatech AF9015 DVB-T USB2.0 stick successfully initialized and connected.
usbcore: registered new driver dvb_usb_af9015
DVB: registering adapter 0 frontend 0 (Afatech AF9013 DVB-T)...
Click to expand...

We have included some new devices supported and we have patched the driver you use.
Thanks for your report and I hope to update ASAP the driver with a new working version.
If you have an HDD or USB pendrive, you can attach the usbtuner0.log file here?

Thanks!
 
P

papi1962

Vu+ Newbie
angelofsky1980 said:
We have included some new devices supported and we have patched the driver you use.
Thanks for your report and I hope to update ASAP the driver with a new working version.
If you have an HDD or USB pendrive, you can attach the usbtuner0.log file here?

Thanks!
Click to expand...

Just tell me please - how to do it

Regards
 
R

rurs

Vu+ Newbie
Working with "CiT DVB-T USB2.0 Adapter"

TR06000.jpg

Thanks for all the work on this
 
kchris

kchris

Vu+ Newbie
can confirm the picture above,,,mine´s name is sinovideo usb 2.0 digital dvb-t tv stick.
comes with,

Package included :
1 x SV-3420B silver DVB-T TV stick
1 x USB cable
1 x Antenna
1 x Remote control
1 x Software CD
1 x converter

and works great with AF9015
 

Attachments

  • SINOVIDEO-DVB-T-HDTV-USB-2-0-Stick-TV-Tuner-Receiver.jpg
    SINOVIDEO-DVB-T-HDTV-USB-2-0-Stick-TV-Tuner-Receiver.jpg
    33.4 KB · Views: 28
L

ledra

Vu+ Newbie
Hi everydody. Recently I joined the world of VU-Duo people, and I am wondering what Usb T stick to buy. On my Dreambox 800 I was using a Hauppage stick (Win TV-NOVA-T-HD Stick) with old
DE 1.3 in flash and the same image in multiboot (Meoboot) and had no problems to install it. Now I am wondering what to buy. Is any list of sticks that are compatible with the existing VU-Duo drivers. A list will help a lot of people.
Thanks,
Ledra
 
angelofsky1980

angelofsky1980

BlackHole Driver Specialist
ledra said:
Hi everydody. Recently I joined the world of VU-Duo people, and I am wondering what Usb T stick to buy. On my Dreambox 800 I was using a Hauppage stick (Win TV-NOVA-T-HD Stick) with old
DE 1.3 in flash and the same image in multiboot (Meoboot) and had no problems to install it. Now I am wondering what to buy. Is any list of sticks that are compatible with the existing VU-Duo drivers. A list will help a lot of people.
Thanks,
Ledra
Click to expand...

A complete list of supported devices is very difficult to produre.
You can see the various threads in this section to determine the device already tested by members and Team.
 
sakisdvb

sakisdvb

BH Lover
Hello.

First of all I have flashed receiver with new BlackHole V1.5

I have a OEM sinovideo SV-3420B USB DVB-T tuner and tried to installed today.
This device was purchased from ebay lately. Looks like this.
Same as most OEM sinovideo USB DVB-T tuners.
etbe219enob.jpg

The manufacturers Specifications
With E3C EC168 chipset.
With Maxliner 5003s silicone tuner.

I have been using it on my computer for 1-2 weeks.
Installed driver on computer is AF9015 USB DVB-T tuner.
Channel scan works fine and everything is ok. :victory:

Today after reading the news about new BH 1.5 image native support for
USB DVB-T tuners (Single/Dual/etc.)
and already supports devices with AF9015 I thought to gived a try.
The driver i have installed at VU+ Solo is AverMedia AVerTV Volar Black HD/HD+ (A850)/(A850+)
The DVB-T tuner is recognized and activated as AF9015.
I have set it up as European DVB-T tuner.
I have removed the RF cable from TV and connected it to USB DVB-T tuner but
neither Auto-scan or manual-scan find any services.

Am I missing something ? :fie:
Please Advise me.

Regards.
 
angelofsky1980

angelofsky1980

BlackHole Driver Specialist
sakisdvb said:
Hello.

First of all I have flashed receiver with new BlackHole V1.5

I have a OEM sinovideo SV-3420B USB DVB-T tuner and tried to installed today.
This device was purchased from ebay lately. Looks like this.
Same as most OEM sinovideo USB DVB-T tuners.
etbe219enob.jpg

The manufacturers Specifications
With E3C EC168 chipset.
With Maxliner 5003s silicone tuner.

I have been using it on my computer for 1-2 weeks.
Installed driver on computer is AF9015 USB DVB-T tuner.
Channel scan works fine and everything is ok. :victory:

Today after reading the news about new BH 1.5 image native support for
USB DVB-T tuners (Single/Dual/etc.)
and already supports devices with AF9015 I thought to gived a try.
The driver i have installed at VU+ Solo is AverMedia AVerTV Volar Black HD/HD+ (A850)/(A850+)
The DVB-T tuner is recognized and activated as AF9015.
I have set it up as European DVB-T tuner.
I have removed the RF cable from TV and connected it to USB DVB-T tuner but
neither Auto-scan or manual-scan find any services.

Am I missing something ? :fie:
Please Advise me.

Regards.
Click to expand...

I suggest to use an external powered hub USB on Solo.
 
angelofsky1980

angelofsky1980

BlackHole Driver Specialist
sakisdvb said:
Already I am using
External Belkin 4 Port USB 2.0 Hub. Self Powered.(F5U404 BLK)
Click to expand...

The hub you are using is self-powered: the power is catch by USB cable.
You should use an hub with external power supply to improove the data trought USB bus.
 
Matrix10

Matrix10

Administrator
I Have test with my AVerTV Volar Black HD
A850 and NO HUB.Perfect.
 

Attachments

  • shot4.jpg
    shot4.jpg
    73.5 KB · Views: 26
  • shot1.jpg
    shot1.jpg
    57.6 KB · Views: 21
  • shot2.jpg
    shot2.jpg
    46.7 KB · Views: 19
  • shot3.jpg
    shot3.jpg
    73.1 KB · Views: 20
R

remek30

Vu+ Newbie
I still have a problem with DVB-T USB AF9015. The channels of the receiver can watch freely, but as I begin to switch to other channels after a while I have a black screen, and helps only a full restart tuner VU + DUO - angelofsky1980 wrote yesterday I bought a USB hub. Today I bought this USB hub and still have the problem that when switching from the tuner DVB-T USB AF9015 after a while I have a black screen and helps only a full restart tuner VU + DUO - USB hub that I bought today is of course an external power supply. Do not know if it's not the fault of drivers for the AF9015. Please help.
 
bluechris

bluechris

Vu+ Newbie
I have a problem also.

I have a AVerTV Volar Black HD and a Sinovideo Usb
the Volar works fine alone. I tried to install in the 1.5 BH version both but i cannot make them work.
I think that both use the same driver and i choosed in the install that both stick use the same driver Volar Black HD but none works.
When i choose 2 usb tuners with different driver and i choose both times the same Volar Black HD drivers then the volar works but the sinovideo dont.

What i must choose as matter the USB Panel to make them both work?
thx in advance
 
angelofsky1980

angelofsky1980

BlackHole Driver Specialist
bluechris said:
I have a problem also.

I have a AVerTV Volar Black HD and a Sinovideo Usb
the Volar works fine alone. I tried to install in the 1.5 BH version both but i cannot make them work.
I think that both use the same driver and i choosed in the install that both stick use the same driver Volar Black HD but none works.
When i choose 2 usb tuners with different driver and i choose both times the same Volar Black HD drivers then the volar works but the sinovideo dont.

What i must choose as matter the USB Panel to make them both work?
thx in advance
Click to expand...

Could you please report some other details about Sinovideo device?
 
bluechris

bluechris

Vu+ Newbie
i did a dmesg and i get this as matter the usb sticks

dvb-usb: found a 'AverMedia AVerTV Volar Black HD/HD+ (A850)/(A850+)' in cold state, will try to load a firmware
dvb-usb: downloading firmware from file 'dvb-usb-af9015.fw'
dvb-usb: found a 'AverMedia AVerTV Volar Black HD/HD+ (A850)/(A850+)' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
DVB: registering new adapter (AverMedia AVerTV Volar Black HD/HD+ (A850)/(A850+))
af9013: firmware version:5.1.0
DVB: registering adapter 1 frontend 0 (Afatech AF9013 DVB-T)...
MXL5005S: Attached at address 0xc6
dvb-usb: AverMedia AVerTV Volar Black HD/HD+ (A850)/(A850+) successfully initialized and connected.
dvb-usb: found a 'Afatech AF9015 DVB-T USB2.0 stick' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
DVB: registering new adapter (Afatech AF9015 DVB-T USB2.0 stick)
af9013: firmware version:5.1.0
DVB: registering adapter 2 frontend 0 (Afatech AF9013 DVB-T)...
NXP TDA18218HN successfully identified.
dvb-usb: Afatech AF9015 DVB-T USB2.0 stick successfully initialized and connected.
usbcore: registered new driver dvb_usb_af9015
DVB: registering adapter 0 frontend 0 (Afatech AF9013 DVB-T)...
af9015: too much data; cmd:41 len:59
I2C write failed ret:-22 reg:00 len:59
DVB: registering adapter 0 frontend 0 (Afatech AF9013 DVB-T)...
 
angelofsky1980

angelofsky1980

BlackHole Driver Specialist
bluechris said:
i did a dmesg and i get this as matter the usb sticks

dvb-usb: found a 'AverMedia AVerTV Volar Black HD/HD+ (A850)/(A850+)' in cold state, will try to load a firmware
dvb-usb: downloading firmware from file 'dvb-usb-af9015.fw'
dvb-usb: found a 'AverMedia AVerTV Volar Black HD/HD+ (A850)/(A850+)' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
DVB: registering new adapter (AverMedia AVerTV Volar Black HD/HD+ (A850)/(A850+))
af9013: firmware version:5.1.0
DVB: registering adapter 1 frontend 0 (Afatech AF9013 DVB-T)...
MXL5005S: Attached at address 0xc6
dvb-usb: AverMedia AVerTV Volar Black HD/HD+ (A850)/(A850+) successfully initialized and connected.
dvb-usb: found a 'Afatech AF9015 DVB-T USB2.0 stick' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
DVB: registering new adapter (Afatech AF9015 DVB-T USB2.0 stick)
af9013: firmware version:5.1.0
DVB: registering adapter 2 frontend 0 (Afatech AF9013 DVB-T)...
NXP TDA18218HN successfully identified.
dvb-usb: Afatech AF9015 DVB-T USB2.0 stick successfully initialized and connected.
usbcore: registered new driver dvb_usb_af9015
DVB: registering adapter 0 frontend 0 (Afatech AF9013 DVB-T)...
af9015: too much data; cmd:41 len:59
I2C write failed ret:-22 reg:00 len:59
DVB: registering adapter 0 frontend 0 (Afatech AF9013 DVB-T)...
Click to expand...

Ok drivers are the AF9015 for both devices but the second one (I think sinovideo) has some buggy feature inside.
We will try to fix it.
 
Status
Not open for further replies.
Top