USB Tuner: SMSUSB devices

Status
Not open for further replies.
Hello
have my Vu + uno
with the new B H v1.6.6
I also have DVB-T tuner Crypto Redi PC 100
and I have (Sorry no supported device found)
have the new driver usbtuner v0.3.5
Collapsed many times many times not
and whom it sometimes works then I can only go standby.
Who should I go to the box with power off, then everything is gone.
what am I doing wrong is where the fault.

Greetings from Greece
 
tekilakos said:
Hello
have my Vu + uno
with the new B H v1.6.6
I also have DVB-T tuner Crypto Redi PC 100
and I have (Sorry no supported device found)
have the new driver usbtuner v0.3.5
Collapsed many times many times not
and whom it sometimes works then I can only go standby.
Who should I go to the box with power off, then everything is gone.
what am I doing wrong is where the fault.

Greetings from Greece
Click to expand...

Post a "dmesg" command output when the USB device is not detected.
 
Hello
have now made ​​two dmesg
First dmesg1 standby usb turner ok.
and from last night.
Second dmesg2 DeepStandby is noon today.
tuner was ok, I then made ​​on deep standby and on again, make
and promt came the message (sorry, no supprted device found. ).

Greetings from Greece
 

Attachments

Hello

Now there is one week ago, and wanted to ask me whether what has since developed.
I have (after the DeepStandby)
DVB-T stick pull out
start box
drivers instalation
box restart
DVB-T stick plug it
Blue button> usb tuner panel> enabel
gui restart

This is of course the stupid thing
every day the same procedure.


Regards from Greece
 
hello friends

I updated to the new version 1.6.7 Back Hole
But my usb-t turner (Crypto Redi pc 100) is not enabel?
(Crypto Redi pc 100) = Hauppauge WinTV MiniStick
why? or am I doing something wrong.
please help
gives the driver as ipk ?
so that I can manually install

Greetings from Greece & Merry Christmas
 
tekilakos said:
hello friends

I updated to the new version 1.6.7 Back Hole
But my usb-t turner (Crypto Redi pc 100) is not enabel?
(Crypto Redi pc 100) = Hauppauge WinTV MiniStick
why? or am I doing something wrong.
please help
gives the driver as ipk ?
so that I can manually install

Greetings from Greece & Merry Christmas
Click to expand...
Install this IPK, reboot your box ... and your device should start to work.

Install the IPK with this telnet command:
Code: 
ipkg install --force-overwrite file.ipk
file.ipk must be the filename you want to install into your box.
 

Attachments

thank you angelo
'll try it today afternoon

So: ipkg install - force-overwrite file.ipk = ipkg install firmware-bh_1.0-r1_all.ipk

1.firmware-bh_1.0-r1_all.ipk in tmp folder
2.telnet command: ipkg install firmware-bh_1.0-r1_all.ipk
is that correct ?

Greetings from Greece & Merry Christmas
 
tekilakos said:
thank you angelo
'll try it today afternoon

So: ipkg install - force-overwrite file.ipk = ipkg install firmware-bh_1.0-r1_all.ipk

1.firmware-bh_1.0-r1_all.ipk in tmp folder
2.telnet command: ipkg install firmware-bh_1.0-r1_all.ipk
is that correct ?

Greetings from Greece & Merry Christmas
Click to expand...

ipkg install --force-overwrite firmware-bh_1.0-r1_all.ipk
 
Hello
I just made ​​it
But it does not work
the stick is not enabel.
says the telnet

[H [Jroot vuuno @: ~ #
ipkg install - force-overwrite-firmware-bh_1.0 r1_all.ipk


opkg:
firmware-bh_1.0-r1_all.ipk: No such file or directory
Collected errors:
* Failed to extract file from control-firmware-bh_1.0 r1_all.ipk
vuuno root @: ~ #
ipkg install - force-overwrite-firmware-bh_1.0 r1_all.ipk


opkg: firmware-bh_1.0-r1_all.ipk: No such file or directory
Collected errors:
* Failed to extract file from control-firmware-bh_1.0 r1_all.ipk
vuuno root @: ~ #
ipkg install - force-overwrite-firmware-bh_1.0 r1_all.ipk

have telnet File Upload

Greetings from Greece & Merry Christmas
 

Attachments

tekilakos said:
Hello
I just made ​​it
But it does not work
the stick is not enabel.
says the telnet

[H [Jroot vuuno @: ~ #
ipkg install - force-overwrite-firmware-bh_1.0 r1_all.ipk


opkg:
firmware-bh_1.0-r1_all.ipk: No such file or directory
Collected errors:
* Failed to extract file from control-firmware-bh_1.0 r1_all.ipk
vuuno root @: ~ #
ipkg install - force-overwrite-firmware-bh_1.0 r1_all.ipk


opkg: firmware-bh_1.0-r1_all.ipk: No such file or directory
Collected errors:
* Failed to extract file from control-firmware-bh_1.0 r1_all.ipk
vuuno root @: ~ #
ipkg install - force-overwrite-firmware-bh_1.0 r1_all.ipk

have telnet File Upload

Greetings from Greece & Merry Christmas
Click to expand...

Upload the ipk in /tmp folder of your box and (via telnet) send this command:
Code: 
ipkg install - force-overwrite /tmp/firmware-bh_1.0 r1_all.ipk
 
angelofsky1980 said:
Upload the ipk in /tmp folder of your box and (via telnet) send this command:
Code: 
ipkg install - force-overwrite /tmp/firmware-bh_1.0 r1_all.ipk
Click to expand...

and here is the telnet protocol

Vuplus 2.2.0 + BlackHole 1.6.7 vuuno

vuuno login:
root

root@vuuno:~#
-------------------- < Script > ----------------------------
uname -r >/tmp/boxtype.dcc; echo ">>> DONE <<<";

>>> DONE <<<
root@vuuno:~#
clear

root@vuuno:~#
ipkg install - force-overwrite /tmp/firmware-bh_1.0 r1_all.ipk


opkg:
r1_all.ipk: No such file or directory
Collected errors:
* Failed to extract control file from r1_all.ipk
root@vuuno:~#
-------------------- < Script > ----------------------------
df -m > /tmp/meminfo.dcc; echo ">>> DONE <<<";

>>> DONE <<<
root@vuuno:~#
 
tekilakos said:
and here is the telnet protocol

Vuplus 2.2.0 + BlackHole 1.6.7 vuuno

vuuno login:
root

root@vuuno:~#
-------------------- < Script > ----------------------------
uname -r >/tmp/boxtype.dcc; echo ">>> DONE <<<";

>>> DONE <<<
root@vuuno:~#
clear

root@vuuno:~#
ipkg install - force-overwrite /tmp/firmware-bh_1.0 r1_all.ipk


opkg:
r1_all.ipk: No such file or directory
Collected errors:
* Failed to extract control file from r1_all.ipk
root@vuuno:~#
-------------------- < Script > ----------------------------
df -m > /tmp/meminfo.dcc; echo ">>> DONE <<<";

>>> DONE <<<
root@vuuno:~#
Click to expand...

Sorry!
I've copied the filename from your previous post and I've not seen an error on filename!

The correct command is:
Code: 
ipkg install - force-overwrite /tmp/firmware-bh_1.0-r1_all.ipk
 
telnet protocol

Vuplus 2.2.0 + BlackHole 1.6.7 vuuno

vuuno login:
root

root@vuuno:~#
-------------------- < Script > ----------------------------
uname -r >/tmp/boxtype.dcc; echo ">>> DONE <<<";

>>> DONE <<<
root@vuuno:~#
clear

root@vuuno:~#
ipkg install - force-overwrite /tmp/firmware-bh_1.0-r1_all.ipk


Upgrading firmware-bh on root from 1.0-r0 to 1.0-r1...

Collected errors:

* Cannot find package -.
* Cannot find package force-overwrite.
* Package firmware-bh wants to install file /lib/firmware/dvb_nova_12mhz_b0.inp
But that file is already provided by package * firmware-dvb-usb
* Package firmware-bh wants to install file /lib/firmware/isdbt_nova_12mhz_b0.inp
But that file is already provided by package * firmware-dvb-usb
* Package firmware-bh wants to install file /lib/firmware/rt73.bin
But that file is already provided by package * firmware-dvb-usb
* Cannot find package firmware-bh.
root@vuuno:~#
-------------------- < Script > ----------------------------
df -m > /tmp/meminfo.dcc; echo ">>> DONE <<<";

>>> DONE <<<
root@vuuno:~#
 
tekilakos said:
telnet protocol

Vuplus 2.2.0 + BlackHole 1.6.7 vuuno

vuuno login:
root

root@vuuno:~#
-------------------- < Script > ----------------------------
uname -r >/tmp/boxtype.dcc; echo ">>> DONE <<<";

>>> DONE <<<
root@vuuno:~#
clear

root@vuuno:~#
ipkg install - force-overwrite /tmp/firmware-bh_1.0-r1_all.ipk


Upgrading firmware-bh on root from 1.0-r0 to 1.0-r1...

Collected errors:

* Cannot find package -.
* Cannot find package force-overwrite.
* Package firmware-bh wants to install file /lib/firmware/dvb_nova_12mhz_b0.inp
But that file is already provided by package * firmware-dvb-usb
* Package firmware-bh wants to install file /lib/firmware/isdbt_nova_12mhz_b0.inp
But that file is already provided by package * firmware-dvb-usb
* Package firmware-bh wants to install file /lib/firmware/rt73.bin
But that file is already provided by package * firmware-dvb-usb
* Cannot find package firmware-bh.
root@vuuno:~#
-------------------- < Script > ----------------------------
df -m > /tmp/meminfo.dcc; echo ">>> DONE <<<";

>>> DONE <<<
root@vuuno:~#
Click to expand...

It's a very bad day for my attention. Please excuse me. My workday make me very tired :(
Code: 
ipkg install --force-overwrite /tmp/firmware-bh_1.0-r1_all.ipk
 
no problem angelo

next telnet protocol
Vuplus 2.2.0 + BlackHole 1.6.7 vuuno

vuuno login:
root

root@vuuno:~#
-------------------- < Script > ----------------------------
uname -r >/tmp/boxtype.dcc; echo ">>> DONE <<<";

>>> DONE <<<
root@vuuno:~#
clear

root@vuuno:~#
ipkg install --force-overwrite /tmp/firmware-bh_1.0-r1_all.ipk


Installing firmware-bh (1.0-r1) to root...

Configuring firmware-bh

root@vuuno:~#

restart box and stick not enabel
 
tekilakos said:
no problem angelo

next telnet protocol
Vuplus 2.2.0 + BlackHole 1.6.7 vuuno

vuuno login:
root

root@vuuno:~#
-------------------- < Script > ----------------------------
uname -r >/tmp/boxtype.dcc; echo ">>> DONE <<<";

>>> DONE <<<
root@vuuno:~#
clear

root@vuuno:~#
ipkg install --force-overwrite /tmp/firmware-bh_1.0-r1_all.ipk


Installing firmware-bh (1.0-r1) to root...

Configuring firmware-bh

root@vuuno:~#

restart box and stick not enabel
Click to expand...

Ok reboot your box again and post here the output of these commands please:

Code: 
dmesg
Code: 
ls -l /lib/firmware
Code: 
cat /proc/bus/usb/devices

There are three separate commands. Pay attention to spaces ;)
 
I now unpacked the ipk
and everything was in it is copied with ftp
restart box
brought nothing but
the usb is not enabel

Greetings from Greece & Merry Christmas
 
Status
Not open for further replies.
Back
Top